Inhaltszusammenfassung zur Seite Nr. 1
Household
Massage Lounger
Sillón de Masaje Doméstico
Operating Instructions
Instrucciones de Uso
Model No./Nº de Modelo EP30003
Before operating this unit, please read these instructions completely.
Antes de utilizar esta unidad, lea compleatamente estas instrucciones y guárdelas para referencia futura.
EP30003.indb 1 2007/07/19 13:05:01
Inhaltszusammenfassung zur Seite Nr. 2
IMPORTANT SAFETY INSTRUCTIONS Basic precautions should always be followed when using an electrical unit, including the following. Please ensure that you read all instructions before using the Household Massage Lounger. DANGER – To reduce the risk of electric shock: 1. Always unplug this unit from the electrical outlet immediately after using and before cleaning. WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Always insert the power plug all the way into th
Inhaltszusammenfassung zur Seite Nr. 3
SAFETY PRECAUTIONS CAUTION: To avoid the risk of injury: 1. Persons with any of the conditions listed below or who are undergoing medical treatment or suffer from medical conditions should consult with their physicians before using the unit: a) Pregnant women, people who are ill, in poor physical shape. b) People suffering from back, neck, shoulder, or hip pain. c) People who have a pacemaker, defibrillator, or other personal medical devices prone to electronic interference. d) People sufferin
Inhaltszusammenfassung zur Seite Nr. 4
OPERATING PRECAUTIONS WARNING: To avoid damaging the chair, follow these precautions: 1. The chair is designed for a maximum user weight of 264 lbs (120 kg). Exceeding the maximum weight may cause permanent damage to the massage mechanism and/or other components of the unit. Any such damage is deemed to be user abuse and is not covered under the Limited Warranty. 2. Do not sit on or drop the control panel. Do not pull the control panel cord or the power cord. Be careful not to catch the cord
Inhaltszusammenfassung zur Seite Nr. 5
GROUNDING INSTRUCTIONS This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER Improper connection of the equipment-grounding
Inhaltszusammenfassung zur Seite Nr. 6
Part names and functions Main unit Front 3 4 5 6 7 8 2 9 10 11 Legrest Legrest Slide Lever Armrest 1 3 10 • Extendable length to approx. 5 in. Leg/Sole massage section Control Panel Stand Covers 2 11 (12 cm) • Includes air massage function • On both the left and right sides Control Panel 4 See page 7 to 8 Retracted position of massage 5 heads Back Cushion 6 Pillow 7 Sole Reflexology Plates Backrest 8 • Removable • Includes integrated massage • Position adjustment possible heads Seat 9
Inhaltszusammenfassung zur Seite Nr. 7
Back 12 13 14 15 11 16 17 18 19 20 Back Cover Power Supply Box 12 20 Control Panel Holder 13 Lock Switch Power Switch Child Safety Decal 14 Control Panel Stand 15 Power Plug 16 Power Cord 17 Safety Precaution Label 18 Wheels 19 Lock Switch Key Lock Switch Key Tag • For preventing children from swallowing it by accident 6 EP30003.indb 6 2007/07/19 13:05:02
Inhaltszusammenfassung zur Seite Nr. 8
Control Panel Cover closed Cover open 13 14 16 15 Off/On Voice Guidance Volume Air Massage Controls 1 8 14 • See page 33 • Selection of the areas to be air Quick Stop 2 massaged • Press this button to stop the Ultra Knead 9 • See page 28 massage immediately. • “Ultra Knead” is the name of the massage actions. Self-Program/Manual Operation 15 User Memory 3 • See page 25 to 26 Controls • See page 35 to 37 • See page 21 to 22 Repeat 10 Program Selection 4 • See page 26 Manual Adjustment Co
Inhaltszusammenfassung zur Seite Nr. 9
Display * This illustration simulates when all lights are illuminated. Voice Guidance Volume Display Pressure Display Manual Upper Body Complex 1 5 12 • See page 33 • Displays the pressure applied by Operation Display the massage heads • Indicates optional operations Off added to manual upper body Self-Program Setting Display 6 operation • See page 21 to 22 Soft • See page 24 Manual Upper Body Massage 7 Medium TAP 1 Display • See page 23 to 25 TAP 2 Loud REGIONAL ROLL Air Intensity Displ
Inhaltszusammenfassung zur Seite Nr. 10
Setting up the massage lounger Where to use the unit 1 Keep at least 4" (10 cm) away from the wall. Ensure there is adequate space to recline. Caution Approx. 77" (195 cm) • Do not use the unit in areas with high humidity, Width approx. 33" (84 cm) such as the bathroom, because this can lead to Approx. 12" (30 cm) electric shock or other accidents. • Place the unit on a totally flat surface. Approx. 14" Failure to do so may result in the unit tipping over. (35 cm) • Do not expose the massag
Inhaltszusammenfassung zur Seite Nr. 11
Confirm that the main unit and the accessories are in the box. Main unit Width: Approx. 27" (68 cm) Height: Approx. 26" (66 cm) Length: Approx. 63" (160 cm) Accessories • Control Panel Stand • Pillow • Armrests (Right/Left) Control panel holder Fixing screw Left/Right indication Small holes on the inside fabric are an intentional part of the functional design. Clip • Allen Key — 1 (Cross-section) 0.2" • Control Panel Stand Covers (4 mm) • Sole Reflexology Plates • Attachment Screws (M6 × 16)
Inhaltszusammenfassung zur Seite Nr. 12
Assembly Attaching the Groove Armrest 1 armrests (On both the right and left sides) 1. Insert the armrest into the unit. • Be careful to avoid pinching (2) F asten the armrest with your fingers. (1) Align the the attachment screws. Right/Left position Main unit indication Pipe 2. Fasten the armrest with the Attachment Turn screws attachment screws. Screw clockwise to tighten. Set the two attachment screws in place by hand first and then tighten firmly with the allen key. Use this S
Inhaltszusammenfassung zur Seite Nr. 13
Attaching the control panel stand to the right or left side panel of the unit 2 (Diagram shows attachment to right armrest.) 1. Insert the attachment screw into the lower hole first The position of the control panel when seated can be and then tighten lightly by hand. selected by choosing the appropriate hole for the screw. 2. Securing the stand with the attachment screws. Near Approx. Tighten the two screws for the remaining two holes 20˚ lightly by hand and then tighten firmly with the al
Inhaltszusammenfassung zur Seite Nr. 14
When removing the control panel stand cover 1. Insert the head of a flat-tip screwdriver in the gap Gap under the mark (O). 2. Push the bottom tab of the cover up to lift the cover. 3. Perform the same procedures as 1 and 2 above for the other gap. 4. Pull the cover up diagonally. 2 Flat-tip screwdriver • Performing this procedure with the allen key or a (Not included in Phillips screwdriver could damage the unit. the standard configuration) 1 2 Raising the backrest to the 4 upright posit
Inhaltszusammenfassung zur Seite Nr. 15
Moving the control panel cord to the left side (when control panel stand is on left side) Legrest 1. Press the button on the control panel to turn on the power. 2. Press the button on the control panel and hold until the legrest has risen far as it will go. Continue pressing until a “beep-beep-beep” sound is heard. 3. Remove the control panel cord from the cord-holder groove. 4. Move the control panel cord under the legrest to the left side. 5. Fasten the control panel cord at two points in
Inhaltszusammenfassung zur Seite Nr. 16
2. Fasten the control panel cord using the clip. Lift the control panel to remove. Clip Fasten the cord so that the portion under the clip is Control panel cord not slack. Attaching the pillow 6 1. Attach the pillow to the velcro fastener. • See page 34 for a guide to the position of the pillow Pillow Velcro fasteners 15 EP30003.indb 15 2007/07/19 13:05:09
Inhaltszusammenfassung zur Seite Nr. 17
Before sitting down Check the following before using the unit Check the surrounding area 1 Make sure there are no objects, people, or pets in the vicinity of the unit. Check the power cord and the power plug 2 Warning • Remove dust from the power plug periodically. Failure to observe this precaution may result in Check defective insulation of the cord due to moisture. Clean dust from the cord using a dry cloth. • Do not damage the power cord and the power plug. (Do not damage, expose to hea
Inhaltszusammenfassung zur Seite Nr. 18
2. Make sure there is no foreign objects on the chair. Caution • Sit on the unit after confirming there is no foreign matter between the parts of the unit. (Check for foreign objects on the backrest, or leg/sole massage section.) Failure to observe this precaution may result in accident or injury. Leg/Sole massage section 3. Make sure the massage heads are in the retracted position. Caution 3. Retracted position • Sit on the unit after confirming the massage heads are in the retracted p
Inhaltszusammenfassung zur Seite Nr. 19
Program Massages Pre-Program Quick Massage Press the button to turn on the power. 1 • The power will turn off automatically if the massage does not start within 3 minutes after turning on the power. Press one of the flashing buttons ( ) to select the 2 program. Pre-Program and Quick Massage Characteristics (Upper Body) • See page 20 for an overview of the respective programs. SHIATSU: Uses mainly shiatsu massage to loosen STRETCH: Uses mainly compression to slowly up deep-seated knots of te
Inhaltszusammenfassung zur Seite Nr. 20
2. Approximately 30 seconds after the body scanning starts, the massage heads slowly lower to the shoulder position, and a soft tapping action begins to determine your shoulder height. Massage Head Tapping action Keep your head on the pillow until the soft tapping begins. Lifting your head from the pillow will result in incorrect determination of the shoulder position. 3. Confirm that the shoulder position has been correctly determined according to the position of the soft tapping. Too high
