Bedienungsanleitung Alvin WorkMaster Jr.

Inhaltszusammenfassung zur Seite Nr. 1

™ ™
WorkMaster & WorkMaster Jr.
Assembly Instructions
1
Tools required: Phillips screwdriver and drill with ⁄8" drill bit.
Parts Included:
A 2pcs B 1pc
E 2pcs
C 1pc D 1pc
Leg Frame, Left & Right Tabletop Back Panel Storage Shelf Rear Extension Tubes
(shipped in separate box) Please Note: Back Panel and Storage Shelf are identical and interchangeable.
F 2pcs J 1pc
G 4pcs H 4pcs I 24pcs
Cardboard
Template
5
Front Extension Tubes Floor Glides Height Adjustment Knobs #1

Inhaltszusammenfassung zur Seite Nr. 2

Figure 3 Insert two rear extension tubes (E) at rear of frame 7 as shown in Figure 3. Curved black caps on tubes Front extension tube Rear extension tube should be set into frame so inclines face front and back of frame. Carefully insert two front extension Adjustment knob tubes (F) with attached brackets facing out. All four extension legs should be at their lowest position and locked with four height adjustment knobs (H). Set base aside. Figure 4 Place tabletop (B) with preferred