Inhaltszusammenfassung zur Seite Nr. 1
Item #: W44COS
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 02/2011
Inhaltszusammenfassung zur Seite Nr. 2
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The main types of hardware used to assemble this product are: wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate hole for
Inhaltszusammenfassung zur Seite Nr. 3
Parts List
Inhaltszusammenfassung zur Seite Nr. 4
Hardware List Long bolt Fixed door hinge Spring door hinge Short bolt U
Inhaltszusammenfassung zur Seite Nr. 5
Screw cam bolts (B) into panel (2). Insert dowels (C) into slat (14). Attach slat (14) to panel (2) using cam bolts and dowels as guides. Insert cam locks (A) into slat (14) and tighten with a screwdriver.
Inhaltszusammenfassung zur Seite Nr. 6
Insert dowels (C) into panels (2,3,10). Screw cam bolts (B) into stand top (1). Attach door stopper (G) to stand top (1) using screws (H).
Inhaltszusammenfassung zur Seite Nr. 7
Screw cam bolts (B) into legs (5,6,7,8). Insert dowels (C) into legs (5,6,7,8). Attach legs (5,6) to panel (3) using cam bolts and dowels as guides. Insert cam locks (A) into panel (3) and tighten with a screwdriver.
Inhaltszusammenfassung zur Seite Nr. 8
Attach legs (7,8) to second panel (3) using cam bolts and dowels as guides. Insert cam locks (A) into panel (3) and tighten with a screwdriver. Attach support leg (11) to panel (2) using long bolts (E). Tighten long bolts (E) with wrench (F). Attach panel (10) to opposite side of panel (2) using long bolts (E). Tighten long bolts (E) with wrench (F).
Inhaltszusammenfassung zur Seite Nr. 9
Attach the assembly from the previous step to the leg assembly from Step 6 using cam bolts and dowels as guides. Insert cam locks (A) into panel (2) and tighten with a screwdriver. Attach the leg assembly from Step 7 to panel (2) using cam bolts and dowels as guides. Insert cam locks (A) into panel (2) and tighten with a screwdriver.
Inhaltszusammenfassung zur Seite Nr. 10
Insert cam locks (A) into the stand assembly. Attach stand top (1) to the stand assembly using cam bolts and dowels as guides. Tighten cam locks (A) with a screwdriver.
Inhaltszusammenfassung zur Seite Nr. 11
Inhaltszusammenfassung zur Seite Nr. 12
Attach handles (N) to doors (12,13) using screws (P). Screw short bolts (K) into doors (12,13).
Inhaltszusammenfassung zur Seite Nr. 13
Insert plastic pivots (Q) into stand top (1) and panel (2).
Inhaltszusammenfassung zur Seite Nr. 14
4 4 Secure back panels (4) using plastic wedges (R) and screws (S). The thin lip of each plastic wedge (R) will fit between back panel (4) and the solid wood of the stand assembly.
