Inhaltszusammenfassung zur Seite Nr. 1
Item #: W52C4CT
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 07/2012
Inhaltszusammenfassung zur Seite Nr. 2
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The main types of hardware used to assemble this product are wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate h
Inhaltszusammenfassung zur Seite Nr. 3
Parts List
Inhaltszusammenfassung zur Seite Nr. 4
Hardware List Wood dowel Wood dowel Handle Drawer stopper
Inhaltszusammenfassung zur Seite Nr. 5
Insert dowels (A) into side panels (1,2). Screw cam bolts (C) into side panels (1,2). Screw cam bolts (C) into top panel (10).
Inhaltszusammenfassung zur Seite Nr. 6
Insert dowels (B) into panels (7,8) and slats (3,9). Insert dowels (A) into slat (3). Attach drawer stopper (M) to slat (9) using screw (P). Insert dowels (A) into slats (6,23). Insert dowels (B) into panel (4) and slat (23). Screw cam bolts (D) into panel (4), drawer fronts (17) and slat (6).
Inhaltszusammenfassung zur Seite Nr. 7
Attach slats (6,23) to panel (4) using cam bolts and dowels as guides. Insert cam locks (E) into panel (4) and slat (23) and tighten with a screwdriver. This will secure slats (6,23) to panel (4).
Inhaltszusammenfassung zur Seite Nr. 8
Further secure slats (6,23) to panel (4) using screws (S). Screw cam bolts (C) into panel (4). Attach drawer stopper (M) to panel (4) using screw (P).
Inhaltszusammenfassung zur Seite Nr. 9
Join panels (7,8) together with slat (9) using dowels as guides. Attach the assembly from the previous step to panel (4) using cam bolts and dowels as guides.
Inhaltszusammenfassung zur Seite Nr. 10
Insert cam locks (E) into panel (7) and tighten with a screwdriver. Insert cam locks (E) into panel (8) and tighten with a screwdriver.
Inhaltszusammenfassung zur Seite Nr. 11
Attach slat (3) to panels (7,8) using dowels as a guide. Attach side panel (1) to the assembly from the previous step using cam bolts and dowels as guides. Insert cam locks (E) into panel (4) and slats (3,6,23) and tighten with a screwdriver.
Inhaltszusammenfassung zur Seite Nr. 12
Attach bottom shelf (5) to side panel (1) using bolts (T), spring washers (U) and washers (V) where indicated above. Tighten bolts (T) with wrench (W). 4 23 Attach side panel (2) to the assembly from the previous step using cam bolts and dowels as guides. Insert cam locks (E) into panel (4) and slats (3,6,23) and tighten with a screwdriver. Attach bottom shelf (5) to side panel (2) using bolts (T), spring washers (U) and washers (V) where indicated above. Tighten bolts (T) with wrench (W).
Inhaltszusammenfassung zur Seite Nr. 13
Screw support leg (22) into bottom shelf (5). Carefully fit top panel (10) into place using cam bolts and dowels as guides.
Inhaltszusammenfassung zur Seite Nr. 14
Insert cam locks (E) into side panel (2), slat (3) and panel (7). Tighten cam locks (E) with a screwdriver. Insert cam locks (E) into side panel (1), slat (3) and panel (8). Tighten cam locks (E) with a screwdriver.
Inhaltszusammenfassung zur Seite Nr. 15
Attach back panels (12) to the back of the console using screws (F). Attach back panel (11) to the back of the console using screws (F). Back panel (11) will overlap the other back panels as shown in insert above.
Inhaltszusammenfassung zur Seite Nr. 16
Cover all visible cam locks with stickers (J) as desired. Carefully place glass panes (16) into door frames (14,15).
Inhaltszusammenfassung zur Seite Nr. 17
Secure glass panes (16) to door frames (14,15) using metal washers (K) and screws (Q). The curve of metal washers (K) will arc into glass panes (16). Attach hinges (L) to doors (14,15) using screws (N).
Inhaltszusammenfassung zur Seite Nr. 18
Attach doors (14,15) to the console using screws (N) at hinges (L). See page 2 for instructions on how to adjust hinges so doors align with console as desired. Attach handles (H) to doors (14,15) using bolts (I). Attach drawer sides (18,19) to drawer back (20) using screws (R). The thin grooves at the base of each drawer piece will align along the inside of the drawer assembly. Repeat this step for the second drawer.
Inhaltszusammenfassung zur Seite Nr. 19
Slide drawer bottom (21) into place along the thin grooves of the drawer assembly. Fit drawer front (17) into place using cam bolts as guides. Repeat this step for the second drawer. I Insert cam locks (E) into drawer sides (18,19) and tighten with a screwdriver. Attach handle (H) to drawer front (17) using bolt (I). Repeat this step for the second drawer.
Inhaltszusammenfassung zur Seite Nr. 20
Carefully slide built drawers into the console. Insert shelf support pins (G) into the console at the desired shelf heights.
