Bedienungsanleitung SkyLink LS-318

Inhaltszusammenfassung zur Seite Nr. 1

Screw-In Dimmer Model LS-318
1. INTRODUCTION 3. PROGRAMMING TRANSMITTERS (TC SERIES)(CONT)
TM
Thank you for your purchase of a SkylinkHome Screw-In Dimmer, Model 1. Switch off the Screw-In Dimmer
LS-318. This receiver module allows you to wirelessly turn on and off, with light bulb by the wall switch.
TM
dim and brighten connected light with a SkylinkHome transmitters.
The Screw-In Dimmer LS-318 can communicate with up to 8 transmitters,
so user has the option to add more transmitt

Inhaltszusammenfassung zur Seite Nr. 2

4. SET TIMER DURATION (CONT) 5. REGULAR OPERATING MODE (CONT) 3. Press and hold the SET button for 3 seconds, the red LED will flash once. On / Off Mode Operation The number of flashes indicates the timer duration: The Screw-In Dimmer allows on / off operation, when the programmed button is activate, it will transmit a signal to toggle the status of the light CAUTION status. For example, if a toggle signal is received when the light is off, that DO NOT TOUCH ANY METAL PARTS WHILE PRESSIN

Inhaltszusammenfassung zur Seite Nr. 3

7. COUNTDOWN TIMER OPERATING MODE 10. FCC The Remote Control is approved by the FCC and it complies with Part 15 of the If a Countdown Timer Mode transmitter or sensor is activated, the light FCC Rules. Its operation is subject to the following two conditions : connected to the Screw-In Dimmer will be on for the predetermined time 1. This device may not cause harmful interference. Interval. During the timer count down, the red LED on the Screw-In 2. This device must accept any interferenc