Bedienungsanleitung Kettler DINING TABLE 2610

Inhaltszusammenfassung zur Seite Nr. 1

2610 36” x 72” DINING TABLE
(16) 1/4 - 20 x 2 1/2” Bolts
Contents:
(4) 1/4 - 20 x 3” Bolts
(4) Legs
(2) Side Braces
Tool Required:
(2) Table feet
#3 Phillips Head Screwdriver
(1) Table Top
Assembly Instructions
1.
1.
With the curved side facing out
align the table leg with the predrilled hole
on the foot of the table and insert a 1/4 -
20 x 3” bolt then tighten with the phillips
screwdriver.
Repeat on the other end, do both sets.
2.
Place the leg with foot
inside the frame undernea

Inhaltszusammenfassung zur Seite Nr. 2

Care & Maintenance Ocean Comfort products are constructed from HDPE (High Density Polyethelene), primarily a recycled material. UV inhibitors are also added to resist fading. Simply maintain your furniture by cleaning with soap and warm water to ensure its long lasting beauty. A soft bristle brush can be used on any tough to clean stains. Stainless steel hardware is used in the assembly of these products and should be rinsed regularly with fresh water if being used in a coastal environment.