Bedienungsanleitung Human Touch Zero-Gravity Recliner

Inhaltszusammenfassung zur Seite Nr. 1

PCX720
troubleshooting guide Zero-Gravity Recliner

Inhaltszusammenfassung zur Seite Nr. 2

September 13, 2013 ©2013 Human Touch, LLC. All rights reserved.

Inhaltszusammenfassung zur Seite Nr. 3

PCX-720 Troubleshooting This Troubleshooting Guide walks you step-by-step through the diagnosis of PCX-720 customer problems. It is important to follow these steps carefully, to ensure that the problem is diagnosed correctly, and therefore the appropriate repair action is taken. Getting Started 1. Reset the chair by unplugging it, then plugging it back in. 2. Push the PRO button and observe whether the blue LED lights. If it does not, the chair is not receiving power. See "Power" on page 3

Inhaltszusammenfassung zur Seite Nr. 4

To Troubleshoot This Do the following: Issue If the footrest will not raise/lower at all, replace the footrest actuator. If that does not solve the problem, do one of the following: � For serial numbers CWC24130001 - My footrest will not CWC24130078, replace both the control raise/lower. panel and the main control module w/power cord. � For all other serial numbers, replace the control panel. Replace the footrest scissor assembly. My footrest is physically bent/broken. Verify that you

Inhaltszusammenfassung zur Seite Nr. 5

Power Step 1: Check the power cord. 1. Check the entire length of the power cord for damage; if the power cord is damaged, replace the control module. Step 2: Check the wall outlet. 1. Plug a different device, such as a known working lamp, into the AC outlet into which the chair is plugged. 2. If the device does not work (is not receiving power), the AC outlet is most likely not working. Plug the chair into a different AC outlet to verify that it receives power. Step 3: If the chair is stil

Inhaltszusammenfassung zur Seite Nr. 6

Human Touch, LLC 3030 Walnut Ave. Long Beach, CA 90807 www.humantouch.com