Inhaltszusammenfassung zur Seite Nr. 1
®
3D DLP HOME-CINEMA TELEVISION
MODELS
740 Series
840 Series
WD-82CB1
SUPPLEMENTAL OWNER’S GUIDE
• For questions:
- Visit our website at www.mitsubishi-tv.com.
- E-mail us at TVsupport@mevsa.com.
- Call Consumer Relations at 800-332-2119 for operational or connection assistance.
• For information on System Reset, please see the back cover.
• To order replacement or additional remote controls or lamps, visit our website at www.mitsuparts.com or
call 800-553-7278.
• MEVSA recommends that you use
Inhaltszusammenfassung zur Seite Nr. 2
2 CAUTION FCC Declaration of Conformity RISK OF ELECTRIC SHOCK Product: Projection Television Receiver DO NOT OPEN Models: WD-73740, WD-82740 CAUTION: TO REDUCE THE RISK OF ELECTRIC WD-73840, WD-82840, WD-92840 SHOCK, DO NOT REMOVE COVER (OR BACK). WD-82CB1 NO USER SERVICEABLE PARTS INSIDE. REFER Responsible Mitsubishi Electric Visual Solutions SERVICING TO QUALIFIED SERVICE PERSONNEL. Party: America, Inc. 9351 Jeronimo Road The lightning flash with arrowhead symbol within Irvine, CA 926
Inhaltszusammenfassung zur Seite Nr. 3
Lamp Replacement Contents When the lamp cartridge needs replacement, replace Important Safety Instructions ................ 4 the lamp yourself and save the cost of a service call. See Appendix A f or instructions. 1 Additional TV Features To Order a Replacement Lamp Under Warranty FAV (Favorites) .......................... 5 Visit our website www.mitsuparts.com or call Sleep Timer ............................ 5 (800) 553-7278. Please have television model number, ChannelView Channel Lis
Inhaltszusammenfassung zur Seite Nr. 4
4 Important Safety Instructions EXAMPLE OF ANTENNA GROUNDING Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. ANTENNA LEAD IN WIRE 1) Read these instructions. GROUND CLAMP 2) Keep these instructions. ANTENNA DISCHARGE UNIT 3) Heed all warnings. (NEC ARTICLE 810.20) ELECTRIC 4) Follow all instructions. SERVICE GROUNDING EQUIPMENT CONDUCTORS 5) Do not use this apparatus near water. (NEC ART
Inhaltszusammenfassung zur Seite Nr. 5
5 Additional TV Features 1 FA V ( Favorites) Sl eep Timer The Sleep Timer turns the TV off after the length of time The FAV key gives you quick access to favorite program you set. To set the TV to turn on at a certain time of sources. Sources can be channels from the ANT input day, see the Setup > Timer menu. or devices connected to the TV. You can store up to nine favorites. Setting the Sleep Timer 1. Press SLEEP. 2. Press SLEEP additional times to increase the time in 30-minute in
Inhaltszusammenfassung zur Seite Nr. 6
6 1. Additional TV Features Chann elView Channel Listings Chann el View Custom Channel Banks ChannelView displays program descriptions sent by broadcasters. This information may be unavailable in some areas. About ChannelView ChannelView™ shows memorized channels on the ANT input. It displays channel names and program information for digital channels. No program information is displayed Select a channel bank to customize. for analog channels. 1. Press GUIDE to display ChannelView. Ch
Inhaltszusammenfassung zur Seite Nr. 7
1. Additional TV Features 7 Picture Shape and Display Formats Zoom: Enlarges the picture to fill the screen by crop- Format Definitions ping the sides, top, and bottom to eliminate black bars. Use the FORMAT key to apply the formats described here. • 480i/480p and SD 4:3 signals: Eliminates top and Standard: The full-screen format used by HDTV bottom bars on anamorphic DVDs with a 2.35:1 signals. Use this format to display anamorphic DVDs aspect ratio. with a 1.78:1 or 1.85:1 aspec
Inhaltszusammenfassung zur Seite Nr. 8
8 1. Additional TV Features St atus Display 3 4 6 1 Press the INFO key to see 402-101 KABC Monday Night Football the on-screen status TV-PG DLSV St. Louis vs. Tampa Bay, played in Tampa for 2 display. The most 5 common displays are 7 Sample information from the shown here. 8 Sleep 30 min on-screen status display 13 English Tuesday 9:10 PM 9 Surround 1080i Standard 10 14 INFO 11 12 Antenna DVD DVR Game Sat. Rcvr. 1. Current Input. Examples: About Channel Numbers 2. Aud
Inhaltszusammenfassung zur Seite Nr. 9
1. Additional TV Features 9 More On TV Inputs and Outputs AUDIO/SURROUND 12 OUTPUT, L/R DIGITAL EXTERNAL AUDIO CONTROLLER 13 CENTER INPUT INPUT OUTPUT 15 14 SUBWOOFER OUTPUT 11 AUDIO/SURROUND R -OUTPUT- L Additional jacks DIGITAL offered on the AUDIO 840 series. OUTPUT EXTERNAL CONTROLLER 10 INPUT CENTER SUB WOOFER Y INPUT OUTPUT L Composite 3D ANT GLASSES video input HDMI USB-P LAN EMITTER 9 R 1 2 34 Y Pb Pr Component video input 1 2 4 5 7 8 HDMI USB LAN ANT DVI/PC L/R Analog stere
Inhaltszusammenfassung zur Seite Nr. 10
10 1. Additional TV Features More On TV Inputs and Outputs, continued 2. USB 10. Y (Composite Video) • Use for a wireless network adapter to receive Analog standard-definition video inputs. Use the adja- StreamTV internet content. cent R and L inputs if you wish to send audio to the TV • The USB port can also serve as a standard USB speakers. 5-volt, 500-milliamp power output to power an accessory device. 11. DIGITAL AUDIO OUTPUT This output sends Dolby Digital or PCM digital audio 3.
Inhaltszusammenfassung zur Seite Nr. 11
1. Additional TV Features 11 Using the TV with a Pe rsonal Computer Connecting a Computer to the TV HDMI Connection Use one of the connection methods listed below based Mitsubishi recommends using high-speed HDMI on your computer’s output. cables to connect newer devices incorporating HDMI technology. Computer AUDIO/SURROUND Computer Graphics Audio R -OUTPUT- L Graphics DIGITAL AUDIO Connection Connection OUTPUT Output EXTERNAL CONTROLLER INPUT CENTER SUB WOOFER INPUT OUTPUT L Digital DVI-
Inhaltszusammenfassung zur Seite Nr. 12
12 1. Additional TV Features Specialized TV Connections Phot os a nd Motion Video as Composite Using the TV with an A udi o-Only Device Video To use the TV speakers to listen to an audio device such as an MP3 or CD player with analog output, follow Connect the camera to the TV using a composite video these steps. cable and control the slide show or movie through the camera. The display resolution will be standard-defini- 1. Insert an unused RCA-style connector into the tion (480i). Y c
Inhaltszusammenfassung zur Seite Nr. 13
1. Additional TV Features 13 Co mputer Video Adjustments Tip 1. Power on the computer. Set the computer’s screen saver to display a pattern after several minutes of inactivity. This acts as a 2. Select PC from the Input Selection menu. To do reminder that the TV is powered on. this, press INPUT to open the Input Selection menu, move the highlight to the PC icon, and press ENTER. 3. Working from the computer, change the resolution of the computer image. View the computer image on the
Inhaltszusammenfassung zur Seite Nr. 14
14 1. Additional TV Features Supplemental Audio Connections (840 series) Add a subwoofer to complement the TV’s speaker array Wir eles s Subwoofer or use the TV’s speakers as a center channel for your Mitsubishi recommends Polk Audio Wireless Subwoofer external sound system. model PSW i8m. The transmitter module can be conveniently powered from the TV’s USB power port. Adding a S ubwoofer Connect an audio cable to the transmitter to supply audio from the TV’s SUBWOOFER OUTPUT. Add a
Inhaltszusammenfassung zur Seite Nr. 15
1. Additional TV Features 15 Supplemental Audio Connections (840 series), continued External R ear Speakers AUDIO/SURROUND You may wish to supplement surround sound from the R -OUTPUT- L DIGITAL AUDIO TV with external rear speakers. External speakers can OUTPUT EXTERNAL CONTROLLER INPUT fill in rear sound if your room lacks a rear wall suitable CENTER SUB WOOFER INPUT OUTPUT L 3D AUDIO/SURROUND for sound reflections. Mitsubishi recommends Polk ANT HDMI OUTPUT GLASSES R L USB-P LAN EMI
Inhaltszusammenfassung zur Seite Nr. 16
16 1. Additional TV Features Supplemental Audio Connections (840 series), continued 2. Turn on the A/V receiver’s center channel pre out if Using the TV Speakers as a Ce nter needed. See the A/V receiver’s instruction manual. Channel 3. Enable the TV’s center channel mode. Press the If using an external surround sound system, you can AUDIO key and press to display the TV Speakers use the TV’s speakers to provide center channel sound. option. Press to select Center. Your A/V rece
Inhaltszusammenfassung zur Seite Nr. 17
17 TV Menus 2 Ma in Men u Closed captions on/ Press MENU on the remote control to and off; caption dis- 23 Captions open the main menu. plays Setup Basic TV setup 24 Name assignments for TV inputs, HDMI 27 Inputs Control setup Picture settings 17 Picture Setting a pass code and restrictions on 29 Lock TV use. Disabling the Sound Sound settings 21 control-panel buttons. Assign a name to the current TV input before making video adjustments (use the New Device Found or Inputs > N
Inhaltszusammenfassung zur Seite Nr. 18
18 2. TV Menus Picture, continued Bri ghtness Adjusts overall picture brightness. Settings are stored independently for each Picture Mode. Colo r Adjusts overall color intensity from monochromatic to fully saturated. Tint Adjusts the red-to-green ratio. Sharpness Adjusts picture detail and clarity. Color High Gives white images a cool cast. May provide the most Adjusts the white balance. Set- Temperature realistic picture under bright lighting. tings are stored independently for each Pictur
Inhaltszusammenfassung zur Seite Nr. 19
2. TV Menus 19 Picture, continued Picture Pe rf ect (PerfectColor, 840 Series) Pe rfectColor Sliders Adjusts the saturation (intensity) of six colors for the current image source. PerfecTint Sliders Adjusts six hues for the current image source Using PerfectColor: Highlight the Perfect icon and press ENTER to display the PerfectColor menu. Settings are retained independently for each TV input. Using PerfecTint: • To switch between PerfectColor™ and PerfecTint™ adjustments, highlight Perfec
Inhaltszusammenfassung zur Seite Nr. 20
20 2. TV Menus Picture, continued 3 D Picture Mode Source Off • Overrides the 3D processing of any HDMI 1.4a-compliant 3D signal and dis- Format plays the signal in 2D instead. • Allows access to some of the 2D picture adjustments that are hidden when the TV’s 3D mode is set to Automatic. Automatic • When the TV receives a 3D signal from an HDMI 1.4a-compliant device, forces the TV automatically into 3D mode and selects the correct 3D format. • When the TV receives a normal 2D signal, mak
