Inhaltszusammenfassung zur Seite Nr. 6
INTRODUCTION Thank you for purchasing this YAMAHA product. We Model name Category No. of pcs. hope it will give you many years of trouble-free AVR-S80 AV receiver 1 enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA NX-S80S Speaker (for front/rear) 4 product. NX-S80C Center speaker 1 This product is a home theater sound system consisting of SW-S80 Subwoofer 1 the components shown on the table at right. Please check the all components are c
Inhaltszusammenfassung zur Seite Nr. 7
INTRODUCTION English FRONT L FRONT R CENTER CHECKING THE ACCESSORIES Check your package to make sure it contains the following items. AVR-S80 NX-SW80 (NX-S80S x4, NX-S80C, SW-S80) Remote control Batteries (x2) AM loop antenna Fasteners (2 sets) Non-skid pads Screws (AA, R06, UM-3) for the center (2 sets: 16 pieces) (4 pieces) speaker Mounting brackets (4 pieces) Indoor FM antenna (U.S.A., Canada, (Europe, U.K. and Australia models) China, Korean and Speaker cables General models) (for the rear s
Inhaltszusammenfassung zur Seite Nr. 8
CONTROLS AND FUNCTIONS Front panel 12 3 4 5 VOLUME STANDBY/ON + STEREO DSP INPUT INPUT MODE SILENT VIDEO2 – MEMORY AUTO/MAN'L A/B/C/D/E PRESET/BAND PRESET/TUNING PHONES VIDEO L AUDIO R OPTICAL 6 7 89 0q w e r t 1 STANDBY/ON 7 VIDEO 2 jacks Turns this system on, or set it to the standby mode. When These jacks are for connecting a video component such as you turn this system on, you will hear a click and there a camcorder or video game player. To select the will be a 4 to 5-second delay before thi
Inhaltszusammenfassung zur Seite Nr. 9
INTRODUCTION English CONTROLS AND FUNCTIONS Remote control This section explains the function of each button on the 3 CODE SET remote control when you operate this system as an Used when setting up the manufacturer code. amplifier. Make sure that the AMP mode is selected 4 DSP program buttons before starting operation. Select DSP programs for the AMP position. For some programs, pressing a button repeatedly selects its Refer to “OPERATING OTHER COMPONENTS subprograms. USING THE REMOTE CONTROL” o
Inhaltszusammenfassung zur Seite Nr. 10
CONTROLS AND FUNCTIONS Using the remote control + – Approximately 6 m (20 feet) 30° 30° Handling the remote control • Do not spill water or other liquids on the remote control. • Do not drop the remote control. • Do not leave or store the remote control in the following types of conditions: – high humidity or temperature such as near a heater, stove or bath; – dusty places; or – in places subject to extremely low temperatures. 6 E2-S80-1-7(6.29)b 6 02.6.29, 4:31 AM
Inhaltszusammenfassung zur Seite Nr. 11
INTRODUCTION English CONTROLS AND FUNCTIONS Front panel display 12345 78 90o 6 VIRTUAL SILENT DVD/CD VIDEO 1VIDEO 2VCR TUNER STEREO AUTO TUNED SP MATRIX PS PTY RT CT B. BOOST PRE MOVIE THTR 12ENTERTAINMENTDTSDOLBY DIGITALPRO LOGIC DIGITAL PTY HOLD MEMORY / PRO LOGIC L C R SLEEP DSP dB LFE RL RC RR PCM MUTE 88888888888888ms q w e r t yu i 1 Decoder indicators q DSP indicator / PRO LOGIC Lights up when the t, g, or Lights up when you select DSP programs. MATRIX are activated. wv indicator 2 VIRTU
Inhaltszusammenfassung zur Seite Nr. 12
PREPARATION STEPS In order to enjoy sound and video images with this sound Before connecting components system, follow the procedures as described below. See • Do not connect this system or other components to the each page for details. mains power until all connections between the components have been completed. • Be sure all connections are made correctly, that is to Installing batteries in the remote control (P.3) say, L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Some components
Inhaltszusammenfassung zur Seite Nr. 13
PREPARATION English SPEAKER SETUP This system has been designed to provide the best sound- Speaker placement field quality with a 5-speaker system, using front left and right speakers, rear left and right speakers and a center Refer to the following diagram when you place the speaker. speakers. The front speakers are used for the main source sound Center speaker Front speaker (R) plus effect sounds. The rear speakers are used for effect Subwoofer and surround sounds. The center speaker is for th
Inhaltszusammenfassung zur Seite Nr. 14
SPEAKER SETUP Mounting the front and rear Installing the speakers speakers on a wall When mounting the speakers on a wall, use the holes on Placing the center speaker the speakers’ back panels. Place the speaker on TV whose top is flat or on the floor 1 Fasten screws into a firm wall or wall under the TV or inside the TV rack so that it is stabilized. support as shown in the figure. When placing the speaker on top of the TV, to prevent the speaker from falling down, put the provided fastener
Inhaltszusammenfassung zur Seite Nr. 15
PREPARATION English SPEAKER SETUP If you want to mount a speaker Using the Yamaha Speaker Stand SPS-80 on a commercially available (option) speaker stand By using the Yamaha Speaker Stand SPS-80, speakers can be placed on the floor. (Two stands make a set.) The provided mounting bracket with 1 pair of screw holes (at an interval of 60 mm) can be used to mount the speaker on a speaker stand. * Those screw holes can be used with M4 screws only. SPS-80 60 mm 1 Attach the bracket to the bottom of
Inhaltszusammenfassung zur Seite Nr. 16
CONNECTIONS Anti-dust cap Connecting TV and audio/video Remove the cap covering the OPTICAL jack when connecting an optical cable to an OPTICAL jack on the components rear panel of this system. Safely store the cap and always re-insert it in the terminal when the terminal is not in use. Types of audio jacks (This cap prevents the entrance of dust.) Rear panel (U.S.A. model) 75Ω UNBAL. VIDEO 1 IN VCR OUT FM ANT GND AM ANT OPTICAL OPTICAL DVD/CD VIDEO 1 DVD/CD IN VCR IN R L VIDEO R L VIDEO DIGIT
Inhaltszusammenfassung zur Seite Nr. 17
PREPARATION English CONNECTIONS The connection example Use the following included or commercially available connection cables. For Audio component For Video Component Video pin cable Optical cable For AV component Audio/Video cable The connection example shown below is just an example. Connect in accordance with the components you have. INPUT OUTPUT INPUT Video pin cable VIDEO VIDEO VIDEO AUDIO AUDIO L L R R VCR Audio/Video Video monitor cable Audio/Video cable 75Ω UNBAL. MONITOR SYSTEM VIDEO
Inhaltszusammenfassung zur Seite Nr. 18
CONNECTIONS Connecting the antennas Both AM and FM indoor antennas are included with this Connecting the AM loop antenna system. In general, these antennas should provide 1 Set up the AM loop antenna, then connect it. sufficient signal strength. Connect each antenna correctly to the designated terminals. Connecting indoor FM antenna Connect the included indoor FM antenna to the FM ANT terminal. Indoor FM antenna AM loop antenna (included) (included) 2 Press and hold the tab to insert the AM
Inhaltszusammenfassung zur Seite Nr. 19
PREPARATION English CONNECTIONS Connecting the speakers Connect the included speakers to the AV receiver (AVR-S80) using the included speaker cables and system control cable as shown below. AV receiver As this terminal is used for testing at the (AVR-S80) factory, do not connect any equipment to this 75Ω UNBAL. MONITOR SYSTEM terminal. FRONT REAR CENTER VIDEO 1 IN VCR OUT OUT CONNECTOR MARK L FM ANT GND AM ANT OPTICAL OPTICAL R DVD/CD VIDEO 1 DVD/CD IN VCR IN SUBWOOFER 6CH PREOUT TO SW–S80 R L V
Inhaltszusammenfassung zur Seite Nr. 1
U B
HOME THEATER SOUND SYSTEM
AVX-S80
VOLUME
STANDBY/ON
+
STEREO DSP INPUT INPUT MODE
SILENT VIDEO2
–
MEMORY AUTO/MAN'L A/B/C/D/E PRESET/BAND PRESET/TUNING
PHONES VIDEO L AUDIO R OPTICAL
AVX-S80: AVR-S80 + NX-S80S + NX-S80C + SW-S80
OWNER’S MANUAL
101_S80_H14(UB) 3 02.5.27, 9:03 PM
Inhaltszusammenfassung zur Seite Nr. 2
IMPORTANT SAFETY INSTRUCTIONS 10 Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the CAUTION product and to protect it from overheating, and these RISK OF ELECTRIC SHOCK openings must not be blocked or covered. The openings DO NOT OPEN should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or CAUTION: TO REDUCE
Inhaltszusammenfassung zur Seite Nr. 3
d) If the product does not operate normally by following 24 Outdoor Antenna Grounding – If an outside antenna or the operating instructions. Adjust only those controls cable system is connected to the product, be sure the that are covered by the operating instructions as an antenna or cable system is grounded so as to provide some improper adjustment of other controls may result in protection against voltage surges and built-up static charges. damage and will often require extensive work by a Ar
Inhaltszusammenfassung zur Seite Nr. 4
CAUTION: READ THIS BEFORE OPERATING YOUR SYSTEM. 1 To assure the finest performance, please read this manual This system is not disconnected from the AC power source as long carefully. Keep it in a safe place for future reference. as it is connected to the wall outlet, even if this system itself is 2 Install this sound system in a well ventilated, cool, dry, clean turned off. This state is called the standby mode. In this state, this place with at least 5 cm on the top, 5 cm on the left and righ
Inhaltszusammenfassung zur Seite Nr. 5
English CONTENTS INTRODUCTION REMOTE CONTROL FEATURES INTRODUCTION ............................................................... 2 OPERATING OTHER COMPONENTS USING THE FEATURES .......................................................................... 2 REMOTE CONTROL ....................................................... 32 CHECKING THE ACCESSORIES ................................... 3 Setting the manufacturer code ......................................... 32 INSTALLING BATTERIES IN THE REMO
Inhaltszusammenfassung zur Seite Nr. 20
CONNECTIONS The back of the Using commercially available (RED) Subwoofer speakers and speaker cables You can use commercially available speaker cables and speakers except for a subwoofer. If you use them, note the (RED) following. • Use the speaker whose impedance is 6Ω or higher. When using the speaker whose impedance is lower than 6Ω , the protection circuit may start working or this Connector system may be damaged. Color tube (RED) • Use magnetically shielded speakers. If this type of speak
