Inhaltszusammenfassung zur Seite Nr. 1
Always there to help you
Register your product and get support at
www.philips.com/welcome
HTB3560
Question?
Contact
Philips
User manual
Inhaltszusammenfassung zur Seite Nr. 2
Energy saving settings 25 Contents Speaker settings 25 Restore default settings 26 1 Important 3 Safety 3 6 Update software 26 3D health warning 4 Check software version 26 Care for your product 4 Update software through the Internet 26 Care of the environment 4 Update software through USB 27 2 Your home theater 5 7 Pr oduct spec ifications 28 Main unit 5 Connectors 5 8 Troubleshooting 31 Remote control 6 9 Notice 33 3 Connect and set up 8 Copyright
Inhaltszusammenfassung zur Seite Nr. 3
Risk of injur y or damage to the home theater! 1 Important • For wall-mountable products, use only the supplied wall mount bracket. Secure the wall mount to a wall that can support the Read and understand all instructions before you combined weight of the product and the use your product. If damage is caused by failure wall mount. Koninklijke Philips Electronics to follow instructions, the warranty does not N.V. bears no responsibility for improper apply. wall mounting that result
Inhaltszusammenfassung zur Seite Nr. 4
Risk of s wallo wing batteries! Parents should monitor their children during • The product/remote control may contain 3D viewing and ensure they do not experience a coin/button type battery, which can be any discomfort as mentioned above. Watching swallowed. Keep the battery out of reach 3D is not recommended for children under six of children at all times! If swallowed, the years of age as their visual system is not fully battery can cause serious injury or death. developed yet. Severe i
Inhaltszusammenfassung zur Seite Nr. 5
2 Your home theater Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Congratulations on your purchase, and Please inform yourself about the local rules welcome to Philips! To fully benefit from the on separate collection of batteries because support that Philips offers(e.g. notification correct disposal helps to prevent negative of product software upgrade), register your consequences for the environm
Inhaltszusammenfassung zur Seite Nr. 6
g LAN Front connectors Connect to the LAN input on a broadband modem or router. h DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. Remote control a (USB) This section includes an overview of the Audio, video or picture input from a USB remote control. storage device. Connect to a Wi-Fi dongle (Model: Philips WUB1110, sold separately). 1 b MUSIC iLINK Audio input from an MP3 player. 2 3 14 Rear connectors 4 15 5 6 7 16 a AC MAINS 8 17 Connect to th
Inhaltszusammenfassung zur Seite Nr. 7
a (Standby-On) j +/- (Volume) • Switch the home theater on or to Increase or decrease volume. standby. k SOUND SETTINGS • When EasyLink is enabled, press Access or exit sound options. and hold for at least three seconds to switch all connected HDMI CEC l Alphanumeric buttons compliant devices to standby. Enter values or letters (using SMS style entry). b (Home) Access the home menu. m REPEAT Select or turn off repeat mode. c Source buttons • DISC/POP-UP MENU : Switch to disc n TOP MENU s
Inhaltszusammenfassung zur Seite Nr. 8
3 Connect and set up This section helps you connect your home theater to a TV and other devices, and then set it up. For information about the basic connections of your home theater and accessories, see the quick start guide. Note • For identification and supply ratings, see the type plate at the back or bottom of the product. • Before you make or change any connections, make sure Note that all devices are disconnected from the power outlet. • Surround sound depends on factors such as
Inhaltszusammenfassung zur Seite Nr. 9
Place the subwoofer at least one meter displayed on TV and the audio is to the left or right of the TV. Leave about automatically played on the home 10-centimeter clearance from the wall. theater. 3 If audio from the TV does not play automatically on your home theater, set up Connect to TV the audio manually (see 'Set up the audio' on page 12). Connect your home theater to a TV to watch videos. You can listen to audio from TV Option 2: Connect to TV through programs through your home the
Inhaltszusammenfassung zur Seite Nr. 10
4 If audio from the TV does not play Connect audio from TV and automatically on your home theater, set up the audio manually (see 'Set up the audio' other devices on page 12). Play audio from TV or other devices through your home theater speakers. Note Use the best quality connection available on • If your TV has a DVI connector, you can use an HDMI/ your TV, home theater, and other devices. DVI adapter to connect to TV. Note • When your home theater and TV are connected Option 3: Connec
Inhaltszusammenfassung zur Seite Nr. 11
Note VCR • Depending on the manufacturer, HDMI-CEC is known by many names. For information on your device, see the user manual of the device. • Philips does not guarantee 100% interoperability with all HDMI-CEC devices. Before you start • Connect your home theater to the HDMI- CEC compliant device through HDMI connection. Set up speakers • Make the necessary connections described in the quick start guide, and then switch Set up the speakers manually to experience the TV to the correct
Inhaltszusammenfassung zur Seite Nr. 12
output through your home theater Connect and set up a home speakers automatically when you play the device. network • [Audio Input Mapping] (Audio input mapping):If system audio control does not Connect your home theater to a home work, map the connected device to the network with internet access and enjoy: correct audio input connector on your • YouTube leanback home theater (see 'Set up the audio' on • Picasa web albums page 12). • BD-Live applications • Software update Note Caution •
Inhaltszusammenfassung zur Seite Nr. 13
LAN Wi-Fi www 1 Using a network cable, connect the LAN 1 Press (Home). connector on your home theater to the 2 Select [Setup], and then press OK. network router. 3 Select [Network] > [Network 2 Press (Home). installation] > [Wireless (Wi-Fi)], and 3 Select [Setup], and then press OK. then press OK. 4 Select [Network] > [Network 4 Follow the onscreen instructions to select Installation] > [Wired (Ethernet)]. and set up the wireless network. 5 Follow the onscreen instructions to • I
Inhaltszusammenfassung zur Seite Nr. 14
2 If the disc does not play automatically, press 4 Use your home DISC or select [play Disc] from the home menu. theater 3 Use the remote control to control play (see 'Remote control' on page 6). • It is normal to hear a little noise when This section helps you use the home theater to you play a Blu-ray disc. This does not play media from a wide range of sources. mean that your home theater is faulty. Before you start • Make the necessary connections described Play buttons in the Quick st
Inhaltszusammenfassung zur Seite Nr. 15
4 Press OK to confirm. 4 Select [2nd Audio Language] or [2nd Subtitle Language]. 5 Select the language, and then press OK. Play Blu-ray 3D disc Your home theater can play Blu-ray 3D video. BD-Live on Blu-ray Read the 3D health warning before playing a 3D disc. Access additional features on the Blu-ray discs with BD-Live content, such as internet chats What you need with the director, the latest movie trailers, • A 3D TV games, wallpaper, and ringtones. • A pair of 3D glasses that are compa
Inhaltszusammenfassung zur Seite Nr. 16
Europe, India, LATAM, and Russia Data files Character Language Set Your home theater can play pictures, audio and [Standard] English, Albanian, Danish, video files contained in a disc or a USB storage Dutch, Finnish, French, Gaelic, device. Before you play a file, check that the file German, Italian, Kurdish (Latin), format is supported by your home theater (see Norwegian, Portuguese, Spanish, 'File formats' on page 28). Swedish and Turkish 1 Play the files from a disc or USB storage [C
Inhaltszusammenfassung zur Seite Nr. 17
» The video options menu is displayed. Note 2 Press the Navigation buttons and OK to • If you use a USB extension cable, USB HUB, or USB select and change: multi-reader, the USB storage device may not be • [Audio Language]: Select audio recognized. language for video. • [Subtitle Language]: Select subtitle 1 Connect a USB storage device to the language for video. (USB) connector on your home theater. • [Subtitle Shift]: Change the subtitle 2 Press (Home). position on the screen. • [Info
Inhaltszusammenfassung zur Seite Nr. 18
» The picture options menu appears. Note 2 Press the Navigation buttons and OK to • AM and digital radio are not supported. select and change the following settings: • If no stereo signal is detected, or if fewer than five • [Rotate +90]: Rotate the picture 90 stations are found, you are prompted to install the radio stations again. degree clockwise. • [Rotate -90]: Rotate the picture 90 degree counter-clockwise. 1 Extend the FM antenna at the back of your • [Zoom]: Zoom into a video scene
Inhaltszusammenfassung zur Seite Nr. 19
5 Use the remote control to select and Tuning grid navigate the application. In some countries, you can toggle the FM tuning Button Action grid between 50 kHz and 100 kHz. Switching Navigation Up: Access the onscreen the tuning grid erases all preset radio stations. buttons keyboard. 1 Press RADIO. Down: Access the onscreen 2 Press . playback buttons. 3 Press and hold (Play) to toggle between Left/Right: Select a video from the 50 kHz or 100 kHz. playlist. • If you do not press a button
Inhaltszusammenfassung zur Seite Nr. 20
View slideshow Control your home theater 1 Select [My photos] from the Picasa menu, 1 On the mobile device, access MyRemote and then press OK. application. » The photo albums in your Picasa Web 2 Select your home theater (by its network Albums are displayed. name) from the home screen. » A browsing bar is displayed at the 2 Select a photo, and then press OK to view bottom of the screen. the photo in full screen. • If your home theater is not found, 3 Press OK again to view the photos in
