Bedienungsanleitung Optimus PRO-LS1

Inhaltszusammenfassung zur Seite Nr. 1

40-4082.fm Page 1 Wednesday, August 11, 1999 11:05 AM
Cat. No. 40-4082 (Black)/40-4083 (White)
PRO-LS1 Mini Home Theater Satellite Speaker
Your Optimus PRO-LS1 Mini Home
SPEAKER PLACEMENT
Theater Satellite Speaker is designed
around a shielded 3-inch woofer and a
Where and how you position speakers
1
/2-inch polycarbonate ferrofluid cooled
has a great effect on the overall sound
tweeter.
of your surround sound system.
The two-way speaker’s small size
Cautions:
makes it ideal for placement on

Inhaltszusammenfassung zur Seite Nr. 2

40-4082.fm Page 2 Wednesday, August 11, 1999 11:05 AM Main Front Speakers CONNECTING THE SPEAKER TO AN Main front speakers are critical for home theater sound. They provide AMPLIFIER/RECEIVER sound for the action that takes place off Cautions: screen, as well as sounds that move from left to right or right to left. Place • Do not exceed the speaker sys- them at least 2 feet away from the TV, tem’s maximum power rating (see with the centers of their grilles as close “Specifications”). as pos

Inhaltszusammenfassung zur Seite Nr. 3

40-4082.fm Page 3 Wednesday, August 11, 1999 11:05 AM 2. Separate the wire conductors for a MAINTENANCE length of about 2 inches, then 1 remove about /2 inch of insulation To enjoy your Optimus PRO-LS1 Mini from the wire’s ends using a wire Home Theater Satellite Speaker for a stripper. long time: • Keep the speaker dry. If it gets wet, wipe it dry immediately. • Use and store the speaker only in normal temperature environments. • Handle the speaker gently and carefully. Don’t drop it. 3. Pre

Inhaltszusammenfassung zur Seite Nr. 4

40-4082.fm Page 4 Wednesday, August 11, 1999 11:05 AM SPECIFICATIONS Speaker Complement ......................................... Woofer: 3-inch Shielded Woofer 1 Tweeter: /2-inch Ferrofluid Tweeter Impedance .................................................................................. Nominal 8 Ohms Frequency Response .................................................................... 200 Hz–20 kHz Power Handling (RMS) ...................................................................