Inhaltszusammenfassung zur Seite Nr. 1
Digital Cinema Series
Theater Optimized Plasma
FPP-61H D20
FPP-50H D20
FPP-42H D20
Operation Manual
For the specifications of your plasma monitor
refer to the Model Information manual
Inhaltszusammenfassung zur Seite Nr. 2
Important Information Precautions Warnings and Safety Precaution Please read this manual carefully before using your plasma This plasma monitor is designed and monitor and keep the manual handy for future reference. manufactured to provide long, trouble-free service. No maintenance other than cleaning is required. Please see the section “Plasma monitor cleaning CAUTION procedure” on the next page. The plasma display panel consists of fine picture RISK OF ELECTRIC SHOCK elements (cells) with more
Inhaltszusammenfassung zur Seite Nr. 3
To avoid damage and prolong operating life: Recommendations to avoid or minimize phosphor burn-in: 1. Use only with120V50/60HzAC power. Like all phosphor-based display devices and all other gas Continued operation at line voltages greater than 120 Volts plasma displays, plasma monitors can be susceptible to AC will shorten the life of the unit, and might even cause phosphor burn under certain circumstances. Certain a fire hazard. operating conditions, such as the continuous display of a 2. Handl
Inhaltszusammenfassung zur Seite Nr. 4
Recommandations importantes Précautions Mises en garde et précautions de Veuillez lire avec attention ce manuel avant d’utiliser le sécurité moniteur à plasma et le conserver accessible pour s’y référer Ce moniteur à plasma a été conçu et fabriqué pour ultérieurement. une utilisation fiable et durable. Il ne nécessite aucun entretien en dehors du nettoyage. Voir la section “Méthode de nettoyage du moniteur à plasma” plus loin. ATTENTION Le panneau à affichage plasma est constitué de fines pa
Inhaltszusammenfassung zur Seite Nr. 5
Pour éviter des dommages et prolonger la durée de Méthode de nettoyage du moniteur à plasma: service de l’appareil: 1. Nettoyer le panneau avant et le cadre en procédant à l’aide 1. N’utiliser qu’une source d’alimentation de 120 V 50/ d’un chiffon doux et sec. Ne jamais utiliser de solvents 60 Hz CA. Le fait d’utiliser l’appareil en continu à des du type alcool ou diluant pour le nettoyage de ces surfaces. tensions de ligne supérieures à 120 Volts CA réduit sa 2. Nettoyer les prises d’aération d
Inhaltszusammenfassung zur Seite Nr. 6
Contents How to Attach Options to the Plasma Monitor .... 1 Image Adjust Settings Menu .................................... 21 Ventilation Requirements for enclosure mounting .......... 1 How to use the safety metal fittings and the screws for Option1 Settings Menu ........................................... 22 Setting the on-screen menu ........................................ 22 safety metal fittings ................................................. 1 Setting the BNC connectors .............
Inhaltszusammenfassung zur Seite Nr. 7
How to Attach Options to the Plasma Monitor You can attach your optional mounts or stand to the plasma monitor in one of the following two ways: *While it is upright. (See Drawing A) * As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face. * Do not touch or hold the screen face when carrying the unit. • This device cannot be installed on its
Inhaltszusammenfassung zur Seite Nr. 8
Part Names and Function Front View VOLUME INPUT SELECT MENU/ENTER DOWN UP LEFT/- RIGHT/+ /EXIT POWER/STANDBY VOLUME INPUT SELECT POWER/STANDBY MENU/ENTER DOWN UP LEFT/- RIGHT/+ /EXIT 7 6 5 4 1 3 2 q Power t LEFT/– and RIGHT/+ Turns the monitor’s power on and off. Enlarges or reduces the image. Functions as the CURSOR ( / ) buttons in the On-Screen Menu w Remote sensor window (OSM) mode. Receives the signals from the remote control. y VOLUME DOWN and UP e POWER/STANDBY indicator Adjusts the v
Inhaltszusammenfassung zur Seite Nr. 9
VIDEO VIDEO 2 AUDIO 1 DVD1/HD1 AUDIO 2 RGB2 / DVD2/HD2 RGB 1 AUDIO 3 RGB 3 R R R VIDEO 1 R/ G/ B/ (IN/OUT) Cr/Pr Y Cb/Pb HD VD ( ) IN OUT YCb/Pb Cr/Pr IN/OUT DVI ( Digital RGB ) External Control REMOTE L L L VIDEO 3 (MONO) (MONO) (MONO) Rear View/ Terminal Board C D E F G H I AB J K A AC IN G RGB1 (mini D-Sub 15pin) Connect the included power cord here. Connect an analog RGB signal from a computer, etc. here. This input can be used for Input or Output. (see B EXT SPEAKER L and R page 10) Connec
Inhaltszusammenfassung zur Seite Nr. 10
w RGB/PC Remote Control Press this button to select RGB/PC as the source. The available sources depend on the setting of “BNC INPUT”. RGB/PC1 RGB/PC2 RGB/PC3 RGB: RGB/PC1 RGB/PC3 COMP. : POWER STANDBY ON RGB/PC can also be selected using the INPUT SELECT button on the monitor. RGB/PC DVD/HD e DVD / HD VIDEO Press this button to select DVD/HD as the source. POSITION The available sources depend on the setting of “BNC / CONTROL MENU/ENTER INPUT”. HD/DVD/DTV RGB: HD1/DVD1/DTV1 HD2/DVD2/DTV2
Inhaltszusammenfassung zur Seite Nr. 11
!5 MULTI Battery Installation and Replacement Not functional for the models covered in this manual. Insert the 2 “AAA” batteries, making sure to set them in with the proper polarity. !6 SELECT Not functional for the models covered in this manual. 1.Press and open the cover. !7 AUTO ADJUST Press this button to adjust Fine Picture, Picture ADJ, Position, and Contrast automatically, or to switch the screen size to ZOOM mode automatically with the superimposed caption displayed fully only when the p
Inhaltszusammenfassung zur Seite Nr. 12
IN OUT REMOTE External Control AUDIO 2 RGB2/DVD2/HD2 RGB 1 AUDIO 3 RGB 3 R R/ G/ B/ R Cr/Pr Y Cb/Pb HD VD (IN/ OUT) ( ) IN OUT DVI Digital RGB External Control REMOTE L L (MONO) (MONO) Using the wired remote control mode Operating Range Connect the remote cable* to the remote control’s remote * Use the remote control within a distance of about 7 m/ jack and the “REMOTE IN” terminal on the monitor. 23ft. from the front of the monitor’s remote control sensor When the cable is connected, the mode
Inhaltszusammenfassung zur Seite Nr. 13
Installation Computer VIDEO 1 VIDEO 2 Alternate PC VIDEO 3 connection ( ) HDTV Satelite L MONO R Analog RGB Y CB/PB Analog YPrPb or CR/PR L(MONO) RGB Digital DVI R (If available) RGB 1 Alternate processor connection R/CR/PR G/Y Faroudja Processor B/CB/PB HD VD ( ) L MONO R Connect using the composite, S- Video and Component inputs . RGB 3 (Digital RGB) Standard Sources: DVD Satellite VHS Video Games Etc. Notes: All standard sources (480i) connect to the Faroudja processo
Inhaltszusammenfassung zur Seite Nr. 14
Connections VIDEO PROCESSOR The primary connection from the video processor to the display is the DVI cable. If an analog signal will be used through the pass-through on the processor (HDTV or PC, for example), the analog RGBHV cables should also be connected. SOURCES DVD – Connect the S-video or component signals to the processor. Interlaced signals are preferred over progressive. VHS – Connect the composite signal to the processor. Video Game – Connect the composite or S-video signal to the p
Inhaltszusammenfassung zur Seite Nr. 15
Pin Assignments and Signal Levels Pin Configuration and Signal of the for 15 pin RGB (Analog) RGB 3 Connector (DVI Connector) The unit is equipped with a type of connector commonly used for digital. 5 4 3 2 1 (This cannot be used for an analog input.) 10 9 8 7 6 15 14 13 12 11 (TMDS can be used for one link only.) RGB 3 Pin No. Signal (Analog) 1 Red 12 3 4 567 8 2 Green or sync-on-green 910 11 12 13 14 15 16 3 Blue 17 18 19 20 21 22 23 24 4 No connection 5 Ground 6 Red ground Pin No. Signal (Di
Inhaltszusammenfassung zur Seite Nr. 16
Basic Operations POWER DIGITAL ZOOM To turn the unit ON and OFF: Digital zoom specifies the picture position and enlarges the picture. 1. Plug the power cord into an active AC power outlet. 1. Press the POINTER button to display the pointer. ( ) 2. Press the Power button (on the unit). The monitor’s POWER/STANDBY indicator turns red To change the size of the picture: and the standby mode is set. Press the ZOOM+ button and enlarge the picture. The pointer will change to resemble a magnifying 3.
Inhaltszusammenfassung zur Seite Nr. 17
To cancel the off timer: OFF TIMER To set the off timer: 1. Press the OFF TIMER button twice in a row. The off timer can be set to turn the power off after 30, 60, 2. The off timer is canceled. 90 or 120 minutes. OFF TIMER 0 1. Press the OFF TIMER button to start the timer at 30 minutes. 2. Press the OFF TIMER button to the desired time. 3. The timer starts when the menu turns off. 30 60 90 120 0 Note: OFF TIMER 30 After the power is turned off with the off timer ... A slight current
Inhaltszusammenfassung zur Seite Nr. 18
WIDE Operations ZOOM size screen Wide Screen Operation (manual) With this function, you can select one of six screen sizes. When viewing videos or digital video discs 1. Press the WIDE button on the remote control. 2. Within 3 seconds ... The picture is expanded in the horizontal and vertical Press the WIDE button again. direction, maintaining the original proportions. The screen size switches as follows: * Use this for theater size (wide) movies, etc. NORMAL FULL STADIUM ZOOM 2.35:1 14:9
Inhaltszusammenfassung zur Seite Nr. 19
FULL size screen Wide Screen Operation with Computer Signals Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen. 1.Press the WIDE button on the remote control. 2.Within 3 seconds ... The image is expanded in the horizontal and vertical Press the WIDE button again. direction. The screen size switches as follows: NORMAL FULL ZOOM ZOOM size screen NORMAL size screen (4:3 or SXGA 5:4) When wide signals are input. The picture has the same size as the normal computer
Inhaltszusammenfassung zur Seite Nr. 20
OSM(On Screen Menu) Controls 5. The adjustments or the settings that are stored in Menu Operations memory. The OSM window is displayed with respect to the The change is stored until you change it again. screen as shown on the diagram. 6. Repeat steps 2 – 5 to adjust an additional item, or press * Depending on the screen’s mode, the OSM may be the EXIT button on the remote control to return to the displayed differently. main menu. In the explanation, the OSM section is shown close up. Note: The m
