Inhaltszusammenfassung zur Seite Nr. 1
HOME-THEATER TELEVISION
MODELS
638 Series
C10 Series
OWNER’S GUIDE
� For questions:
- Visit our website at www.mitsubishi-tv.com.
- E-mail us at MDEAservice@mdea.com.
- Call Consumer Relations at 800-332-2119 for operational or connection assistance.
� For information on System Reset, please see the back cover.
� To order replacement or additional remote controls or lamp cartridges, visit our website at
www.mitsuparts.com or call 800-553-7278.
®
Inhaltszusammenfassung zur Seite Nr. 2
2 CAUTION FCC Declaration of Conformity RISK OF ELECTRIC SHOCK DO NOT OPEN Product: Projection Television Receiver Models: WD-60638, WD-65638, WD-73638 CAUTION: TO REDUCE THE RISK OF ELECTRIC WD-60C10, WD-65C10, WD-73C10 SHOCK, DO NOT REMOVE COVER (OR BACK). Responsible Mitsubishi Digital Electronics NO USER SERVICEABLE PARTS INSIDE. REFER Party: America, Inc. SERVICING TO QUALIFIED SERVICE PERSONNEL. 9351 Jeronimo Road Irvine, CA 92618-1904 The lightning flash with arrowhead symbol Tel
Inhaltszusammenfassung zur Seite Nr. 3
3 Contents For Your Records Record the model number, serial number, and 1 Setup and Operation purchase date of your TV. The model and serial Getting Started ......................... 5 numbers are on the back of the TV. Refer to this page when requesting assistance with the TV. TV Controls ............................ 6 The STATUS Indicator ..................... 7 MODEL NUMBER TV Inputs .............................. 8 SERIAL NUMBER Picture Settings ......................... 8 PURCH
Inhaltszusammenfassung zur Seite Nr. 4
4 Important Safety Instructions Please read the following safeguards for your TV and EXAMPLE OF ANTE NNA GR OUNDING retain for future reference. Always follow all warnings and instructions marked on the television. ANTE NNA 1) Read these instructions. LE AD IN WIR E 2) Keep these instructions. GR OUND C LAMP ANTE NNA 3) Heed all warnings. DIS C HAR GE UNIT (NE C AR TIC LE 810-20) ELECTRIC 4) Follow all instructions. SERVICE GR OUNDING EQUIPMENT CONDUCTOR S 5) Do not use this apparatus near
Inhaltszusammenfassung zur Seite Nr. 5
5 Se tup and Operation 1 Getting Started Package Contents Before You Power on the TV Please take a moment to review the following list of 1. Review the important safety, installation, and oper- items to ensure that you have received everything. ating information at the beginning of this book. 2. Choose a location for your TV. Remote Control � Allow at least four inches of space on all sides of the TV to help prevent overheating. Over- heating may cause premature failure of the TV Two AA Batt
Inhaltszusammenfassung zur Seite Nr. 6
6 1. Setup and Operation TV Controls Emitter End Remo te Control Sleep Timer. Turns off the TV after the length of time you set. Press SLEEP repeatedly to increase the time from 15 minutes up to the maximum of 90 minutes. To cancel the timer, Powers TV on or off. press SLEEP again to highlight Off. Number/letter keys Channel tuning, page 8 PIN entry, page 24 Returns to the previous channel. LAST Adds a separator in digital channel numbers. Clears some menu entries. Displays up
Inhaltszusammenfassung zur Seite Nr. 7
1. Setup and Operation 7 TV Controls, continued TV Control Panel STATUS POWER Buttons on the control panel duplicate some keys on 65” or 73” TV: Open the remote control. cover to use buttons � Refer to lower labels when using TV menus or after on the front panel. activating a special function. � Refer to upper labels when no TV menus are dis- played. � SYSTEM RESET. If the TV does not respond to the INPUT remote control, control-panel buttons, or will not Typical power on/off, press
Inhaltszusammenfassung zur Seite Nr. 8
8 1. Setup and Operation TV I nputs Tun i ng Channels from the Antenna Input After performing a channel scan, use these methods to Selecting an Input to Watch tune to channels on the ANT input. Channels can be either from an over-the-air antenna or from direct cable Press the INPUT key to select a TV input to watch. Use service. the Setup > Input menu to rename, add, or remove inputs from the list. � Enter the channel number using the number keys on the remote control and press ENTER.
Inhaltszusammenfassung zur Seite Nr. 9
1. Setup and Operation 9 The FO RMAT Key and Picture Shape Using the FORMAT Key Repeatedly press the Sample Uses of the FORMAT Key FORMAT key to cycle You can use the FORMAT key to reduce or eliminate black areas at the through displays avail- picture edges. able for the current program. The TV will remember the format Press you last used on each input. Important Squarish 4:3 image is Standard mode stretches the Black bars at the edges of the narrower than the 16:9 picture sideways
Inhaltszusammenfassung zur Seite Nr. 10
10 1. Setup and Operation TV Signals and Display Formats, FA V ( Favorite Channels) continued Favorite Channels and the Remote Control Summary of Mitsubishi Display Formats The FAV key gives you quick access to Original Signal favorite channels from the antenna input. TV You can store up to nine favorite channels. Display Anamorphic DVD Non-anamorphic or SD 4:3 Standard Distorted. Recommended 1. Switch to the antenna Not recom- input (press INPUT and mended. select Antenna). Expand
Inhaltszusammenfassung zur Seite Nr. 11
1. Setup and Operation 11 Using the TV with a Pe rsonal Computer 3. Power on the TV and computer. Co nnecting a Computer to the TV 4. Go to the TV’s Setup > Input > Input Name menu Use one of the connection methods listed below based and assign the name PC. on your computer’s video output. 5. To switch the TV to the computer, press the INPUT Computer Audio key and select PC from the inputs list. Video Connection Video Output Connection Note: If you are unable to hear audio from the Digital
Inhaltszusammenfassung zur Seite Nr. 12
12 1. Setup and Operation Using the TV with a Personal St atus Display Computer, continued Press the INFO key to see an abbreviated status display. C omputer Display Formats INFO Press INFO again to see Press the FORMAT key repeatedly to cycle through the details. Not all information displays available for your computer’s video signal. shown in the sample will be available for all programs Computer Signal As Displayed on TV Screen and sources. 4 X 3 16 X 9 Original Format Zoom Stand
Inhaltszusammenfassung zur Seite Nr. 13
1. Setup and Operation 13 3 D Video Watching 3D Video To display 3D gaming or 3D cinema content, your Mitsubishi TV requires: Note: Active 3D glasses are required. � A compatible 3D source device outputting a 3D 1. Connect your 3D video device to one of the TV’s signal in checkerboard format, 1080p, 60-Hz; lower HDMI inputs and power on the device. resolutions may be supported but will not fill the 2. Press INPUT. screen. 3. Highlight the 3D video input and press ENTER to � Active-shu
Inhaltszusammenfassung zur Seite Nr. 14
14 1. Setup and Operation 3 D Video, continued Do not use near staircases, ledges or balconies. You 3D Safety Requirements may risk falling during or after use. � 3D Glasses are NOT designed as sunglasses or safety glasses and do not provide protection. 3D Epilepsy glasses should be worn only when viewing 3D WARNING! IF YOU OR ANY MEMBER OF YOUR material. FAMILY HAS A HISTORY OF EPILEPSY, CONSULT A PHYSICIAN BEFORE USING 3D VIDEO OR GAME � Do not wear the wireless glasses in any situa
Inhaltszusammenfassung zur Seite Nr. 15
15 TV C onnections 2 Connection Panel DVI/PC AUDIO 3D GLASSES EMITTER DIGITAL AUDIO INPUT ( page 13 ) ( page 17 ) OUTPUT ( page 18 ) 5 6 7 HDMI ANT Y/ VIDEO Pb Pr 3D DVI/PC DIGITAL HDMI GLASSES AUDIO AUDIO INPUT OUTPUT EMITTER 2 1 3 Y/ VIDEO Pb Pr R AUDIO L (480i / 480p / 720p / 1080i) 1 2 3 4 8 AN T R & L Y/VIDEO Y Pb Pr USB HDMI Analog (composite (component For use by your ( page 17 ) ( page 18 ) Audio video) video) TV servicer Input 1. ANT ( Antenna) 6. DIGITAL AUDIO OUTPUT Connect your
Inhaltszusammenfassung zur Seite Nr. 16
16 2. TV Connections Connection Panel, continued The HDMI inputs can also accept digital DVI video H DMI Cable Categories signals. To connect a device’s DVI output to the TV’s HDMI cables are available as standard and high- HDMI input, use an HDMI-to-DVI adapter or cable plus speed types. an analog audio cable. Connect the analog audio cables to the DVI/PC AUDIO INPUT jacks on the TV to receive � High-Speed HDMI Cables. Newer DVD audio from your DVI device. players, video games, and
Inhaltszusammenfassung zur Seite Nr. 17
2. TV Connections 17 H D MI Device Y Pb Pr Co mponent Video Device Mitsubishi recommends using high-speed HDMI Required: cables to connect newer devices incorporating HDMI � RCA-type component video cables technology. � Left/right analog audio cables A ANT NT HDMI HDMI Y Y/ VIDEO / VIDEO P Pb b P Pr r 3 3D D DVI/PC DVI/PC HDMI ANT ANT HDMI HDMI D DIGIT IGITAL AL GLASSES GLASSES A AUDIO UDIO A AUDIO UDIO EMITTER EMITTER O OUTPUT UTPUT INPUT INPUT 2 1 3 Y/ VID Y/ VIDEO EO P Pb b P Pr r 3 3D D Y/
Inhaltszusammenfassung zur Seite Nr. 18
18 2. TV Connections A/ V Receiver with Coaxial Input Ante nna or Cable TV Service This connection sends audio from the TV to an external Connect the incoming cable to the TV’s ANT input. sound system. You must use this connection if you want to send audio to a sound system from Antenna � TV broadcasts received on the ANT input Direct cable (no cable box) � Devices connected directly to the TV or Note: On rare occasions, an HDMI signal may be Cable TV copy-restricted and cannot be output
Inhaltszusammenfassung zur Seite Nr. 19
2. TV Connections 19 HDMI HDMI ANT ANT A/ V Receiver with HDMI Output Y/ VIDEO Y/ VIDEO P Pb b P Pr r 3D 3D DIGITAL DVI/PC DVI/PC HDMI D DIGIT DIGIT IGITAL AL AL GLASSES GLASSES Required: One HDMI-to-HDMI cable AUDIO AUDIO AUDIO A AUDIO UDIO AUDIO OUTPUT OU OUTPUT TPUT EMITTER EMITTER INPUT INPUT 2 OUTPUT 1 3 Y/ VIDEO Y/ VIDEO Pb Pb P Pr r This option allows you to view content from devices R R AUDIO AUDIO L L ( (480i / 480p / 720p / 1080i) 480i / 480p / 720p / 1080i) connected to an A/V rece
Inhaltszusammenfassung zur Seite Nr. 20
20 TV Menus 3 Press MENU on the remote control to open the main menu. � Press ENTER or to see sub-menus. � Press MENU or to back up one menu level. � Press EXIT to close all menus. Main menu Pi ct ure Picture Settings Picture settings are saved for the current input only. Using the Picture Settings Menu 1. Highlight the item you want to change and press ENTER to display an adjustable slider or a list of set- tings. 2. Make changes, then press ENTER to return to this menu. 3. When done, high
