Inhaltszusammenfassung zur Seite Nr. 1
Home Theater
Standard
Instructions for Use
Owner’s Reference
Inhaltszusammenfassung zur Seite Nr. 2
Krell Industries, Inc. Home Theater Standard 45 Connair Road Surround Sound Preamplifier/Processor Orange, CT 06477-3650 USA Instructions for Use TEL 203-799-9954 v. 99.3 FAX 203-891-2028 E-MAIL krell @ krellonline.com WEBSITE http.’/Jwww.krellonlin e.com This product complies with the EMC directive’ (89/336/EEC) and the low-voltage directive (73/23/EEC), WARNINGS The Home Theater Standard must be placed on a firm level surface where it is not exposed to dripping or splashing. The ventilation gr
Inhaltszusammenfassung zur Seite Nr. 3
Contents Page INTRODUCTION 1 DEFINITION OF TERMS 1 UNPACKING 2 PLACEMENT _. 3 AC Power Guidelines 3 GETTING STARTED 4 ... Read Tills First 4’ An Introduction to System Setup 5 FRONT PANEL DESCRIPTION 7 BACK PANEL DESCRIPTION 13 REMOTE CONTROL DESCRIPTION 17 Battery Installation and Removal 17 CONNECTING THE HOME THEATER STANDARD TO YOUR SYSTEM 21 Connect Analog and Digital Sources 21 Connect Video Sources 21 Connect Amplifier(s) 22 23 SYSTEM SETUP AND CONFIGURATION OVERVIEW 24 SYSTEM SETUP AND C
Inhaltszusammenfassung zur Seite Nr. 4
Illustrations Page FIGURE 1 The Home Theater Standard Front Panel 6 F~GURE 2 The Home Theater Standard Back Panel 12 FIGURE 3 The Home Theater Standard Remote Control 16 Krell Home Theater Standard iv
Inhaltszusammenfassung zur Seite Nr. 5
Introduction Thank you for your purchase of the Krell Home Theater Standard Surround Sound Preamplifier/Processor. The Home Theater Standard provides optimum music and cinema soundtrack reproduction quality through Krell C.urrent Mode, discrete Class A direct-coupled circuitry, and balanced outputs on all six channels. Broadcast quality switching and circuitrywincluding component video, S-video, and composite video---ensure unmatched video p~fformance. Built-in Dolby Digitai,~ Dolby Pro Logic, a
Inhaltszusammenfassung zur Seite Nr. 6
Unpacking Open the box and remove the top layer of foam. You see these items: 1 Home Theater Standard 1 IEC connector (AC power) cord 1 Home Theater Standard handheld remote control - 2 AAA-size 1.5 Volt batteries 1 T-15 Torx wrench ~small "U’ type) 1.T-10 Torx wrench (small "L" type) 2 12 VDC output (12 V trigger) cables 1 packet containing the owner’s reference manual, the RS-232 Port developer’s reference, the "read this first" insert, and the warranty registration card Carefully remove the u
Inhaltszusammenfassung zur Seite Nr. 7
Placement Before you install the Home Theater Standard into your system, review the following guidelines to choose the location for the component. This will facilitate a clean, trouble- free installation. The Home Theater Standard does qot require any type-of special rack or cabinet for installation. For the dimensions of your Home Theater Standard see Specifications, on pages 56-57. The Home Theater "S~andard requires at least two inches (5 cm) of clearance on each side and at least two inches
Inhaltszusammenfassung zur Seite Nr. 8
Getting Started READ THIS FIRST Perform the following steps to make the On-Screen Display (OSD) viewable on your video monitor. The video format and video signals of the Ho_me Theater Standard and the video monitor need to match before the OSD is viewable. The video format of the video signal can be set to either NTSC or PAL. The following table details the different videosignals and .video formats supported by the Home Theater Standard: Type of Connector Most Commonly Video Format Signal Labele
Inhaltszusammenfassung zur Seite Nr. 9
4. Verify that the video monitor’s video signal input corresponds to the Home Theater Standard’s video signal output. Press the menu key on the handheld remote control to verify that the OSD is now viewable on the video monitor. The system configuration main menu appears when the video format and video signals between the Home Theater Standard and your video monitor are compatible. If you have any questions regarding the selection of the.video format, please call your authorized Krell dealer, di
Inhaltszusammenfassung zur Seite Nr. 10
22 5 6 7 8 9 10 11 12 13 14 16 15 17 23 2624 29 26 3027 4 18 19 20 21 3 2 1 22 Front Panel Window 11 Tuner Button and LED Basic Operation 23 User Button 12 Auxl Button and LED 1 Power Button Balance Button 24 13 Aux2 Button and LED 2 Power LED 14 Tape/VCR2 Button and LED 3 Stand-by LED Individual Channel Buttons 15 Main Zone and Zone 2 Button 4 Infrared Sensor 25 Center Button 16 Main Zone and Zone 2 LEDs 26 Rear Button I~frared Emitter 17 input Device Selection Buttons and LEOs 27 Sub Button 5
Inhaltszusammenfassung zur Seite Nr. 11
Front Panel Description See Figure I on page 6 The Home Theater Standard front panel provides power on and off; input, zone, and processing mode selection; monitoring and display of processor status; and balance and volume control.. The front panel components are described below. Basic Operation ’- 1 Power Button .... The power button switches the Home Video Standard from stand-by to operational mode. Note When you power off while zone 2 is selected, only zone 2 turns off. Press the power button
Inhaltszusammenfassung zur Seite Nr. 12
Front Panel Description, continued 6 LD Button and LEDs Use this button to select the laser disc device. 7 SAT Button and LEDs _. Use this button to select the satellite feed device. 8 VCR1 Button and LEDs Use this button to sele.c.t the VCR device. 9 TV Button and LEDs Use this button to select the television device. 10 CD Button and LEDs Use this button to selectthe compact disc device. 11 Tuner Button and LEDs Use this button to select the AM/FM tuner device. 12 Auxl Button and LEDs Use this
Inhaltszusammenfassung zur Seite Nr. 13
Front Panel Description, continued 17 Infrared Emitter Emits the Home Theater Standard remote operation code to a learning remote. See Program Remote, on page 45. A learning remote control can be programmed to o.per.ate the Home Theater Standard via the infrared emitter. See Program Remote, on page 46. Processing Mqd.e Buttons and LEDs 18 Stereo Button and LED Use this button to select the stereo decoding mode, which allows you to listen to a stereo recording in two channel (left and right) mode
Inhaltszusammenfassung zur Seite Nr. 14
Front Panel Description, continued 22 Front Panel Display The front panel display provides status messages for Home Theater Standard operations, including volume and balance level, decoding mode, and zone information. In addition, when a new device is selected, the physica~ inputs are displayed. 23 User Button Use this button to select one of three available dynamic range compression modes: max(imum), normal, or~night. See User Button Setup,_.on page 47. , 24 Balance Button Press this button to
Inhaltszusammenfassung zur Seite Nr. 15
Front Panel Description, continued 29 Level Down and Up Buttons Use the volume level buttons to adjust the output for the entire system as well as balance and individual levels for the center speaker, rear speakers, and subwoofers. The volume level is shown in the front panel display. The volume level buttons are also used to scroll through menu selections. See System S~tup and Configuration, on page 24. 30 Recall Button ....... , Use this button to recall current system configuration settings.
Inhaltszusammenfassung zur Seite Nr. 16
45 5O 41 44 34 31 33 31 E6 54 : 55 53 49 47 52 434246 48 40 32 37 38 39 3635 32 Remote Control Digital Audio Inputs and Outputs Analog Outputs and Inputs 50 RS-232 Remote Connector 41 Digital Optical Inputs 31 Balanced Analog Audio Outputs 51 PHAST Unk Out and In Connectors 42 Digital Audio Inputs 32 Single-ended Analog Audio Outputs 52 RC-5 In 43 DigitalAudio Outputs 33 Multi-Channel Audio Output Connector 53 12 VDC Out and In 44 S-video Outputs 34 B-1 Left and B-1 Right 45 S-video Inputs 35 Ta
Inhaltszusammenfassung zur Seite Nr. 17
Back Panel Description See Figure 2 on page 12 The back panel of the Home Theater Standard provides all input and output connections, remote control inputs and outputs, power on and off, and power connection. The back panel functions are described below. Analog Audio Outputs and Inputs 31 Balanced Anal0-g Audio Outputs -.- The Home Theater Standard is equipped with six balanced analog audio channel outputs, with XLR connectors, for the left, center, right, left rear, right rear, and subwoofer. 3
Inhaltszusammenfassung zur Seite Nr. 18
Back Panel Description, continued 38 VCR1 Out Left and Right The Home Theater Standard is equipped with one set of single-ended outputs with RCA connectors, for a VCR audio source. 39 Zone 2 Out Left and Right -- The Home Theater Standard is equipped with one set of single-ended zone 2 audio outputs with RCA connectors. 40 S-1, $-2, S-3, S-4, S-5 Left and Right Inputs ’ The Home Theater Standard is equipped with five sets of single-ended audio inputs with RCA connectors. Digital Audio Inputs and
Inhaltszusammenfassung zur Seite Nr. 19
Back Panel Description, continued 48 Component Video Outputs The Home Theater Standard is equipped with one set of component video outputs with RCA connectors. Component video uses three wires (labeled Y, Cr, and Cb on back panel) to convey the video signal, including the OSD. 49 Component Video Inputs The Home Theater $.t.a. ndard is equipped ~with two sets of component video inputs. Remote Control " 50 RS-232 Connector The Home Theater Standard is equipped with an RS-232 port, which provides a
Inhaltszusammenfassung zur Seite Nr. 20
56 ’59 57 ’58 6O 63 61 62 67 65 66 68 69 73 71 72 .77 75 76 78 79 80 83 81 82 Power Functions 64 CD Key Control Function 56 Amp Key 65 Tuner Key Keys 57 FITS Key 66 Auxl Key 74 Bal Key 67 Aux2 Key 75 Cntr Key Zone Selection 68 VCR Key " 76 Rear Key 58 Main Key 69 Tape Key 77 Sub Key 59 Z2 Key 78 Prey Key Processing Mode Device Selection 79 User Key Key Keys 80 Level Keys 70 Stereo Key 60 DVD Key 81 Menu Key 71 M1 Key 61 LD Key 82 Mute Key 72 M2 Key 62 SAT Key 83 Enter Key 73 Pm Logic Key 63 TV K
