Inhaltszusammenfassung zur Seite Nr. 1
EN_TH-C906020[USUGUX].book Page 1 Thursday, July 13, 2006 3:29 PM
DVD DIGITAL CINEMA SYSTEM
TH-C90
Consists of XV-THC90, SP-PWC90,
SP-THC90F, SP-THC90C and SP-THC90S
TH-C60
Consists of XV-THC60, SP-PWC60,
SP-THC60F, SP-THC60C and SP-THC60S
TH-C20
Consists of XV-THC20, SP-PWC20,
SP-THC20F, SP-THC20C and SP-THC20S
INSTRUCTIONS
LVT1504-005B
[US, UG, UX]
Inhaltszusammenfassung zur Seite Nr. 2
EN_TH-C906020[USUGUX].book Page 1 Thursday, June 29, 2006 5:30 PM Warnings, Cautions and Others IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove sc
Inhaltszusammenfassung zur Seite Nr. 3
EN_TH-C906020[USUGUX].book Page 2 Thursday, June 29, 2006 5:30 PM Warnings, Cautions and Others Caution: Proper Ventilation To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are shown below: Wall or XV-THC90/XV-THC60/ XV-THC90/XV-THC60/ Wall or obstructions 8 cm XV-THC20 XV-THC20 obstructions 3 cm Front 10 cm 3 cm No obstructions 15 cm Wall or obstructions Wall or 20 cm SP-PWC90/ obstructions SP-PWC90/SP-PWC60
Inhaltszusammenfassung zur Seite Nr. 4
EN_TH-C906020[USUGUX].book Page 1 Thursday, June 29, 2006 5:30 PM Table of contents Introduction ....................................................2 Playback ........................................................ 21 Notes on handling ..................................................................... 2 Basic playback ...........................................................................21 Supplied accessories .................................................................. 2 One
Inhaltszusammenfassung zur Seite Nr. 5
EN_TH-C906020[USUGUX].book Page 2 Thursday, June 29, 2006 5:30 PM Introduction 7 Safety precautions Notes on handling Avoid moisture, water and dust Do not place the system in moist or dusty places. 7 Important cautions Avoid high temperatures Installation of the system Do not expose the system to direct sunlight and do not place it near • Select a place which is level, dry and neither too hot nor too cold; a heating device. between 5°C and 35°C. When you are away • Leave sufficient distanc
Inhaltszusammenfassung zur Seite Nr. 6
EN_TH-C906020[USUGUX].book Page 3 Thursday, June 29, 2006 5:30 PM About discs Notes on DVD-R and DVD-RW • This system does not support “multi-border” disc. Playable disc types Notes on CD-R and CD-RW This system has been designed to play back the following discs: • This system can play CD-Rs or CD-RWs recorded with ISO 9660 DVD VIDEO DVD AUDIO format. • This system supports “multi-session” discs (up to 20 sessions). • This system cannot play “packet write” discs. Region code of DVD VIDEO VCD
Inhaltszusammenfassung zur Seite Nr. 7
EN_TH-C906020[USUGUX].book Page 4 Thursday, June 29, 2006 5:30 PM About discs For JPEG files • We recommend to record a file at 640 x 480 resolution. (If a file Playable file types has been recorded at a resolution of more than 640 x 480, it will For all playable files take a longer time to be displayed.) • This system can only play baseline JPEG files. • The system can only recognize and play files with one of the following extensions, which can be in any combination of upper For ASF fi
Inhaltszusammenfassung zur Seite Nr. 8
EN_TH-C906020[USUGUX].book Page 5 Thursday, June 29, 2006 5:30 PM Description of parts and controls Front panel (center unit) The numbers in the figures indicate the pages where the details of the parts are described. Display window 23 27 39 40 22 27 20 22 24 25 34 31 35, 36 22 33 22 40 39 35 41 21 21 21 23, 39 19 Disc tray (inside): 21 Remote sensor: 7 19 18 18 21 41 15 19 Rear panel (center unit) Only for TH-C90: 14 8 14 14 15 13 13 14 14 IMPORTANT Illustrations used in this manual are of T
Inhaltszusammenfassung zur Seite Nr. 9
EN_TH-C906020[USUGUX].book Page 6 Thursday, June 29, 2006 5:30 PM Description of parts and controls Powered subwoofer Front SP-PWC90 SP-PWC60 SP-PWC20 POWER ON POWER ON POWER ON lamp: 18 lamp: 18 lamp: 18 Rear SP-PWC90 SP-PWC60 SP-PWC20 11 14 14 See below. Power cord: 15 12 12 See below. See below. 14 Power cord: 15 Power cord: 15 NOTE * Do not block the ventilation openings to allow proper air • For safety reasons, always ensure that there is sufficient space behind circulation by the c
Inhaltszusammenfassung zur Seite Nr. 10
EN_TH-C906020[USUGUX].book Page 7 Thursday, June 29, 2006 5:30 PM Description of parts and controls Remote control Putting batteries in the remote control 18 19 17 16 21 R03 (UM-4)/AAA (24F) type dry-cell batteries (supplied) 16 Number buttons: 24 16, 43 16 16 - 41 41 - 43 25, 29 25, 29 If the range or effectiveness of the remote control decreases, replace 16, 19 20 - 42 both batteries. CAUTION 27 - 36 • Do not expose batteries to heat or flame. 19 Operating the system from the remote cont
Inhaltszusammenfassung zur Seite Nr. 11
EN_TH-C906020[USUGUX].book Page 8 Thursday, June 29, 2006 5:30 PM Do not connect the power cord until all other connections have been made. Connections If reception is poor Connecting the FM and AM Center unit antennas 7 AM loop antenna AM loop antenna Setting up supplied AM loop antenna Outdoor single vinyl-covered wire antenna (not supplied) If the antenna cord is covered with the insulation 7 FM antenna coat, twist and pull the insulation coat off and remove. FM antenna (supplied) Ce
Inhaltszusammenfassung zur Seite Nr. 12
EN_TH-C906020[USUGUX].book Page 9 Thursday, June 29, 2006 5:30 PM Do not connect the power cord until all other connections have been made. Connections 2 Connecting the satellite (front, Red Clear center, surround) speakers 7 Assembling the front speakers — TH-C90 Black striped Black 7 Connecting the center and surround speakers — TH-C90 Front speaker (SP-THC90F) (2) Base plate (2) Before assembling — • Prepare a Phillips screwdriver (not supplied). Take care not to drop any component part
Inhaltszusammenfassung zur Seite Nr. 13
EN_TH-C906020[USUGUX].book Page 10 Thursday, June 29, 2006 5:30 PM Do not connect the power cord until all other connections have been made. Connections 7 Assembling the front and surround speakers — TH-C60 3 White Red Black Black Base plate (4) Front speaker Surround Stand (4) (SP-THC60F) (2) speaker (SP-THC60S) (2) You can route the speaker cord by using speaker cord clamp • Check the model name of each speaker from the label on the (supplied). rear to locate each speaker correctly. Ass
Inhaltszusammenfassung zur Seite Nr. 14
EN_TH-C906020[USUGUX].book Page 11 Thursday, July 13, 2006 3:29 PM Do not connect the power cord until all other connections have been made. Connections 7 Connecting the satellite speakers to the subwoofer — TH-C90 Before connecting the speaker cords; Twist and pull the insulation coat off and remove. Powered subwoofer Speaker cord SP-PWC90 • Connect the black striped cords to the black (r) terminals. • Connect the clear cords to the (q) terminals referring to the table below: FRONT SPEAKE
Inhaltszusammenfassung zur Seite Nr. 15
EN_TH-C906020[USUGUX].book Page 12 Thursday, June 29, 2006 5:30 PM Do not connect the power cord until all other connections have been made. Connections 7 Connecting the satellite speakers to the subwoofer — TH-C60/TH-C20 Note that the illustration below is for SP-PWC60. Before connecting the speaker cords; Twist and pull the insulation coat off and remove. Speaker cord Powered subwoofer TH-C60: SP-PWC60 TH-C20: SP-PWC20 • Connect the black cords to the black (r) terminals. • Connect the whi
Inhaltszusammenfassung zur Seite Nr. 16
EN_TH-C906020[USUGUX].book Page 13 Thursday, June 29, 2006 5:30 PM Do not connect the power cord until all other connections have been made. Connections Speaker layout Connecting a TV To obtain the best possible sound from this system, you need to • You can get better picture quality in the order — Component place all the speakers except the subwoofer at the same distance video > S-video > Composite video. from the listening position. • Distortion of picture may occur when connecting to the
Inhaltszusammenfassung zur Seite Nr. 17
EN_TH-C906020[USUGUX].book Page 14 Thursday, June 29, 2006 5:30 PM Do not connect the power cord until all other connections have been made. Connections Connecting the powered Connecting a cassette recorder subwoofer (Only for TH-C90) You can enjoy playing tape and also recording tracks/files from this Powered system. System cord subwoofer Center unit (supplied) Center unit RCA pin plug cord Align the 5 marks. Align the 5 marks. (not supplied) RCA pin plug cord (not supplied) Connecting t
Inhaltszusammenfassung zur Seite Nr. 18
EN_TH-C906020[USUGUX].book Page 15 Thursday, June 29, 2006 5:30 PM Do not connect the power cord until all other connections have been made. Connections Connecting a USB mass storage Connecting the power cord class device Make sure that all other connections have been completed. You can connect a USB mass storage class device such as a USB Center unit flash memory device, hard disc drive, multimedia card reader, digital camera, etc. to this system. • After connecting a USB mass storage cla
Inhaltszusammenfassung zur Seite Nr. 19
EN_TH-C906020[USUGUX].book Page 16 Thursday, June 29, 2006 5:30 PM Operating external components with the remote control The buttons described below are used on pages 16 and 17. Operating the TV 7 To set the manufacturer’s code 1 Slide the remote control mode selector to TV. 2 Press and hold F TV. Keep the button pressed until step 4 is finished. 3 Press ENTER. Number buttons 4 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits). Examples: For a Hitachi TV: Press 1, th
Inhaltszusammenfassung zur Seite Nr. 20
EN_TH-C906020[USUGUX].book Page 17 Thursday, June 29, 2006 5:30 PM See page 16 for button locations. Operating external components with the remote control Operating the DBS tuner or Operating the VCR CATV converter 7 To set the manufacturer’s code 7 To set the manufacturer’s code 1 Slide the remote control mode selector to VCR/DBS. 1 Slide the remote control mode selector to VCR/DBS. 2 Press VCR. 2 Press DBS. 3 Press and hold F VCR/DBS. Keep the button pressed until step 5 is finished. 3 P
