Inhaltszusammenfassung zur Seite Nr. 1
iPump 6420
Professional Audio Server
iPump 6420
Professional Audio Server
User’s Manual
800070-01 Rev. B
Inhaltszusammenfassung zur Seite Nr. 2
iPump 6420 User’s Manual Data, drawings, and other material contained herein are proprietary to Wegener Communications, Inc., and may not be reproduced or duplicated in any form without the prior written permission of Wegener Communications, Inc. The information contained herein is subject to change without notice. Revisions may be issued to advise of such changes and/or additions. WEGENER, COMPEL CONTROL, MEDIAPLAN, ENVOY, UNITY, UNITY·IP, and iPUMP are trademarks of Wegener
Inhaltszusammenfassung zur Seite Nr. 3
iPump 6420 User’s Manual TABLE OF CONTENTS Chapter 1: GENERAL INFORMATION………………………...1 Chapter 2: INSTALLATION……………………………….......23 Chapter 3: OPERATION.……………………………………....37 Chapter 4: MAINTENANCE AND TROUBLESHOOTING..101 Chapter 5: CUSTOMER SERVICE…………………………..107 Appendix 1: TERMINAL COMMANDS……………………..109 Appendix 2: SNMP MIBS...…………………………………..113 Appendix 3: FAULT CONDITIONS..………………………..129 www.wegener.com 800070-01 Rev B iii
Inhaltszusammenfassung zur Seite Nr. 4
iPump 6420 User’s Manual (This page intentionally left blank.) www.wegener.com 800070-01 Rev B iv
Inhaltszusammenfassung zur Seite Nr. 5
iPump 6420 User’s Manual Chapter 1: GENERAL INFORMATION This chapter gives a general overview of this Manual and of the iPump 6420. Table of Contents 1.1. Manual Overview...................................................................................................... 2 1.2. iPump 6420 Overview............................................................................................... 3 1.2.1. Basic Store/Forward Mission........................................................
Inhaltszusammenfassung zur Seite Nr. 6
iPump 6420 User’s Manual 1.1. Manual Overview This manual provides instructions and reference information for the proper installation and operation of the WEGENER iPump 6420 Professional Audio Server, referred to throughout the manual as the iPump 6420. This manual is divided into these chapters: Chapter 1 General Information –an overview of the iPump 6420 missions, its functions and specifications, and a glossary of terms. Chapter 2 Installation – instructions for initial instal
Inhaltszusammenfassung zur Seite Nr. 7
iPump 6420 User’s Manual 1.2. iPump 6420 Overview The WEGENER iPump 6420 is an integrated, digital satellite receiver, decoder, and audio server designed to provide the most cost effective method of delivering and storing content for radio network operations. In tandem with WEGENER Compel/MediaPlan, the iPump 6420 is a key part of the WEGENER Digital Media Delivery System, which combines secure MPEG and IP digital transmission with media management and server storage, to provide the mo
Inhaltszusammenfassung zur Seite Nr. 8
iPump 6420 User’s Manual The non-real-time portion of the S/F sub-system accepts a schedule file, on a regular basis, for each supported affiliate site. This schedule will define local spots, as files, to be played in each available segment of the day. These segments are defined by the radio network management as those portions of each hour where specific spots will be eligible for play at the remote receiving i6420 sites. And for each segment of each hour of each day, a playlist name
Inhaltszusammenfassung zur Seite Nr. 9
iPump 6420 User’s Manual Figure 1-1: Store/Forward System overview 1.2.2. www.wegener.com 800070-01 Rev B Chapter 1, Page 5 P. 5 of 6 PIO (triggering) Customer Traffic & closures Automation accepted Uplink site Tx antenna Rx antenna Relay closures systems delivered Thru satellite link: Local affiliate (1 or 2 banks) radio stations - Streaming live audio programming RBDS (typical) RF outputs RF subsystem: - Broadcasted file transfers input (1 or 2x) Modulator & Upconverter One of many
Inhaltszusammenfassung zur Seite Nr. 10
iPump 6420 User’s Manual Figure 1-2: Using Playlists as indirection 13:05 13:06 13:07 13:08 13:09 13:10 Network Song 26A Song 27A spot At uplink, the request to execute a Playlist, { by name Closure from customer traffic system Fires Network (COMPEL) cmd to execute Playlist “CR-100305-13-1”, where ‘CR’ is “Classic Rock” network On each local affiliate, if that File Song 26A Song 27A 4502.mp2 Playlist exists, { it references a different local file @ Affiliate 282: Playlist CR-100305-
Inhaltszusammenfassung zur Seite Nr. 11
iPump 6420 User’s Manual 1.2.3. Supplemental capabilities Along with the above basic S/F system functions, certain supplemental capabilities are beneficial to the radio network mission. As shown in Figure 1, Return Path provides a general tool to request and receive low-bandwidth status and logging information from edge i6420s back to the uplink control system. Return Path is implemented with HTTP protocol, allowing the i6420s to communicate with the uplink control system with through
Inhaltszusammenfassung zur Seite Nr. 12
iPump 6420 User’s Manual system. This is called “Compel-over-Internet”. Along with this capability, the i6420 may also poll for and then pull in it’s local spot files over the same internet connections. This is called “Internet File Delivery”. This allows the i6420 to easily implement a premium radio network feature called “Automation Mode”, to be discussed. Compel commands, either directly addressed, or addressed as groups, or “indirectly addressed” based on current unit settings, a
Inhaltszusammenfassung zur Seite Nr. 13
iPump 6420 User’s Manual TimeZone Delay Most radio networks span several time zones. Because of this, to keep the same scheduled “feel” at all affiliates through all those time zones, they, once again must do their own recording and re-broadcasts, using extra satellite bandwidth. The iPump6420 TimeZone Delay (TZD) feature allows the central radio network manager to avoid these complexities. Using TZD, the radio network manager can broadcast one feed over the satellite, with all the co
Inhaltszusammenfassung zur Seite Nr. 14
iPump 6420 User’s Manual new versions of application software, and the maintenance of the basic non-volatile unit parametric settings. The Hard-drive (HDD) storage is provided to store all the media and objects needed for the full Store/Forward mission. From the satellite, media file content, transmitted in the MPE/IP encapsulation, is extracted and the file then stored to the HDD. The database which captures the location, playability, and lengths, of all audio files is also resident o
Inhaltszusammenfassung zur Seite Nr. 15
iPump 6420 User’s Manual modem requires a simple analog “POTS” telco line for operation. It would be used as a first alternative to the LAN or WAN ports for attempted Return Path reporting. Moving on in Figure TBD, the Local PIO closures are inputs provided to allow local automation equipment to cue the iPump6420 to deliver specific operations at precise times. These are fully balanced wire pairs, optically isolated from the i6420 chassis. Under Compel network or local user control, s
Inhaltszusammenfassung zur Seite Nr. 16
iPump 6420 User’s Manual Figure 1-3: iPump6420 Functional Block Diagram WAN Flash Storage: WAN & LAN Software & settings Ethernet adaptors LAN POTS Modem Analog telco line (option) RF DVB Receiver Input subsystem Local PIO Incoming closures (closure) inputs MPEG Transport Local Controller Internal (Supports Compel, web, Transport Demux Control terminal, & FP cntl) Compel Selected Progr/ Audio stream HDD Storage: Audio Decompression Media, playlists, module #1: schedules, OAR Wave-PCM, m
Inhaltszusammenfassung zur Seite Nr. 17
iPump 6420 User’s Manual 1.4. iPump 6420 Specifications Characteristic Specification DVB-S1-QPSK Tuner RF Input Input Impedance 75 Ω unbalanced Input VSWR, 75 Ω system < 2:1 (9.0 dB R.L. min), 950-1450 MHz < 3:1 (6.0 dB R.L. min), 1450-2150 MHz Surge Resistance Survives up to 10 direct-coupled 8kV discharges (per IEC 801-2) RF Tuning Input Frequency Range 950 to 2150 MHz LO Leakage at Input < -50 dBm Symbol-rate Range 2 to 45 Msps (may be limited by Transport Rate Limits) Tuni
Inhaltszusammenfassung zur Seite Nr. 18
iPump 6420 User’s Manual Characteristic Specification ASI Transport Input Option DVB-ASI Input One input per DVB-ASI per EN50083-9 Annex B Physical layer 270 Mbaub signaling on 75 Ω coax cable Minimum byte gap Down to 5-byte interbyte gaps Transport data rate 60 Mbps max. Transport Demux MPEG/DVB Max Supported Rate 60 Mbps Programs Unlimited Audio streams per Unlimited program MPE/IP File Downloads Types 1) By MPE/UDP/IP in satellite Transport 2) By HTTP over Internet M
Inhaltszusammenfassung zur Seite Nr. 19
iPump 6420 User’s Manual Characteristic Specification File selection keywords 1) SHUFFLE—select files to play from folder such that (used in any file-play each plays once before any repeat, but order is specification for an insert) different each time through 2) RANDOM—select files to randomly play from folder, but without any repeats 3) SEQUENTIAL—Like SHUFFLE, but maintains same play order each time through file list in folder Insertion “Profiles” 1) Pre-silence mutes live for pro
Inhaltszusammenfassung zur Seite Nr. 20
iPump 6420 User’s Manual Characteristic Specification LAN/WAN Ethernet Ports Physical Layer LAN & Full-duplex, auto-negotiating 10baseT, 100base TX (twisted WAN pair) on RJ45 jack Media Access and Link Per IEEE 802.3 (Ethernet) Layers Network and Transport Binds to TCP/IP stack Layers Network Services Telnet, SMB, FTP, SSH (for diagnostics), HTTP (web) server, HTTP client (for Return Path) WAN port security All inbound TCP connections blocked; inbound ICMP messages (e.g. PING)
