Inhaltszusammenfassung zur Seite Nr. 1
2-683-494-62 (1)
Micro HI-FI
Component
System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear of the unit. Record these
numbers in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No. ______________ Serial No. ______________
CMT-U1BT
© 2006 Sony Corporation
CMT-U1BT.GB.2-683-494-62(1)
Inhaltszusammenfassung zur Seite Nr. 2
WARNING This equipment has been tested and found to WARNING comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. To reduce the risk of fire or electric These limits are designed to provide reasonable shock, do not expose this apparatus protection against harmful interference in a residential installation. This equipment to rain or moisture. generates, uses, and can radiate radio frequency energy and, if not installed and used in CAUTION accordance
Inhaltszusammenfassung zur Seite Nr. 3
Note to CATV system installer: Note on DualDiscs This reminder is provided to call the CATV A DualDisc is a two sided disc product which system installer’s attention to Article 820-40 of mates DVD recorded material on one side the NEC that provides guidelines for proper with digital audio material on the other side. grounding and, in particular, specifies that However, since the audio material side does not the cable ground shall be connected to the conform to the Compact Disc (CD) standard,
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents Guide to parts and controls ................................5 Others Information on the display ..................................7 Troubleshooting ...................................................... 24 Messages ...................................................................... 27 Getting Started Precautions ................................................................. 28 Hooking up the system securely .....................8 Specifications ...........................
Inhaltszusammenfassung zur Seite Nr. 5
Guide to parts and controls This manual mainly explains operations using the remote, but the same operations can also be Guide to parts and controls performed using the buttons on the unit having the same or similar names. Unit (HCD-U1BT/Compact Disc Receiver) / (power) button (page 10, 20, 23, 27) Press to turn on the system. STANDBY indicator (page 19, 24) Lights up when the system is turned off. VOLUME +/– button (page 11, 13, 16, 17, 18) Press to adjust the volume. Sound
Inhaltszusammenfassung zur Seite Nr. 6
ENTER button (page 10, 20, 21, 22, Playback buttons and function 23) buttons Press to enter the settings. BLUETOOTH (play) button (page 16) / (go back/go forward) Press to select the BLUETOOTH function. button (page 11, 17, 21) Press to start playback of the music on the BLUETOOTH device (BLUETOOTH Press to select a track or file. mobile phone, etc.). Unit: TUNE +/– (tuning) button Unit: USB (play/pause) (page 13) button (page 17) Remote: +/– (tuning) button Pres
Inhaltszusammenfassung zur Seite Nr. 7
Guide to parts and controls CLOCK/TIMER SELECT button (page 23) Information on the display CLOCK/TIMER SET button (page 10, 23) Press to set the clock and the timers. REPEAT/FM MODE button (page 11, 13, 17) Press to listen to a disc, a single track or file repeatedly. Press to select the FM reception mode (monaural or stereo). Battery compartment lid (page 10) CLEAR button (page 15, 21) Press to delete a pre-programmed track or Text information file. Press to erase the pair
Inhaltszusammenfassung zur Seite Nr. 8
Getting Started Hooking up the system securely Speakers Left speaker Right speaker Antennas Find a location and an orientation that provide good reception, and then set up the antenna. Keep the antennas away from the speaker cords, the power cord and the USB cable to avoid picking up noise. FM lead antenna (Extend it horizontally.) or Brown side for other regions White side for North American model GB CMT-U1BT.GB.2-683-494-61(1)
Inhaltszusammenfassung zur Seite Nr. 9
Getting Started Power Connect the power cord to a wall socket. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). Wall socket Continued AM loop antenna GB CMT-U1BT.GB.2-683-494-61(1)
Inhaltszusammenfassung zur Seite Nr. 10
To use the remote Slide and remove the battery compartment lid Setting the clock , and insert the two supplied R6 (size AA) batteries, side first, matching the polarities 1 Press / (power) to turn on the shown below. system. 2 Press CLOCK/TIMER SET . If the current mode appears on the display, press / repeatedly to select “CLOCK SET?” and then press ENTER . 3 Press / repeatedly to set the hour, and then press ENTER . Notes 4 Use the same procedure to set the •
Inhaltszusammenfassung zur Seite Nr. 11
Basic Operations 3 Start playback. Basic Operations Press (or CD on the unit) . 4 Adjust the volume. Playing a CD/ATRAC/MP3 Press VOLUME +/– . disc Other operation 1 Select the CD function. To Press Press CD . Pause playback (or CD on the unit) . To resume play, 2 Insert a disc in the disc slot with press the button again. the label side facing forward. Stop playback . Select a folder +/– (or / on the on an “ATRAC” unit) . disc or MP3 disc Insert a disc with
Inhaltszusammenfassung zur Seite Nr. 12
Notes on playing “ATRAC”/MP discs To change the play mode • Do not save other types of files or unnecessary folders Press PLAY MODE repeatedly while the on a disc that has “ATRAC” and MP3 files. player is stopped. You can select normal play • Folders that have no “ATRAC” and MP3 files are (“ *” for all “ATRAC” files and MP3 files in skipped. the folder on the disc), shuffle play (“SHUF” or • “ATRAC” and MP3 files are played back in the order “ SHUF*”), or program play (“PGM”). that t
Inhaltszusammenfassung zur Seite Nr. 13
Basic Operations To tune in a station with a weak signal If “TUNED” does not appear and the scanning Listening to the radio does not stop, press TUNING MODE repeatedly until “AUTO” and “PRESET” 1 Select “FM” or “AM.” disappear, and then press +/– (or TUNE +/– on Press TUNER/BAND repeatedly. the unit) repeatedly to tune in the desired station. 2 Select the tuning mode. Press TUNING MODE repeatedly until To reduce static noise on a weak FM stereo “AUTO” appears. station Press
Inhaltszusammenfassung zur Seite Nr. 14
Pairing this system with a Listening to music of a BLUETOOTH device BLUETOOTH mobile phone Pairing is an operation where BLUETOOTH or BLUETOOTH device devices register with each other beforehand. Use the procedure below to pair the system This is a Micro HI-FI Component System with your BLUETOOTH device. Once a incorporating BLUETOOTH wireless pairing operation is performed, it does not technology for enabling you to listen to music need to be performed again. If pairing is from your
Inhaltszusammenfassung zur Seite Nr. 15
Basic Operations To erase all the pairing registration 4 Enter the passcode. information Passcode entry may be required depending on the type of BLUETOOTH device. 1 Press BLUETOOTH on the unit. For details about the operations of When the system is connected with the BLUETOOTH device, refer to the a BLUETOOTH device (when the operation manual supplied with your BLUETOOTH device name appears in BLUETOOTH device. the system display), turn off the system or change the function to canc
Inhaltszusammenfassung zur Seite Nr. 16
Other operation Playing music of a BLUETOOTH device To Press Pause playback You can operate a BLUETOOTH device by . connecting the system and a BLUETOOTH Stop playback . device using AVRCP. If the system is not Select a file / . connected with a BLUETOOTH device using AVRCP, “Not in Use” appears when you Find a point in Hold down / . operate the system. a file 1 Select the BLUETOOTH function. Note Press BLUETOOTH on the unit. These operations may not be available for
Inhaltszusammenfassung zur Seite Nr. 17
Basic Operations Note It may take about 10 seconds before “Detect” appears Listening to music of an depending on the type of USB device connected. USB device 3 Start playback. Press (or USB on the unit) . You can connect an optional USB device (Digital music player or USB storage media) to 4 Adjust the volume. the (USB) port on the unit and listen to Press VOLUME +/– . music stored in the USB device. See “Playable USB devices and BLUETOOTH devices” (page 33) for a list of USB
Inhaltszusammenfassung zur Seite Nr. 18
To change the play mode Press PLAY MODE repeatedly while the Using optional audio USB device is stopped. You can select normal components play (“ ” for all files in the folder on the digital music player), shuffle play (“SHUF” or “ SHUF”), or program play (“PGM”). 1 Connect additional audio component to the AUDIO IN jack on the unit Notes on the USB device using an audio analog cord (not • With some connected USB devices, after an operation is performed, there may be a delay befor
Inhaltszusammenfassung zur Seite Nr. 19
Basic Operations Adjusting the sound Changing the display To add a sound effect To Press Change DISPLAY repeatedly To Press information on when the system is turned 1)2) Generate a DSGX on the unit. the display on. more dynamic Change Display DISPLAY repeatedly sound mode (See when the system is turned (Dynamic below.) off. Sound Generator X-tra) 1) For example, you can view CD/“ATRAC”/MP3 disc Set the sound EQ repeatedly to select information or the USB device infor
Inhaltszusammenfassung zur Seite Nr. 20
To select the text mode You can select from a variety of languages for displaying the text information on a disc or an USB device. Use buttons on the unit for the operation. 1 Press / to turn off the system. 2 Press SEARCH . The language list appears. The languages you can select vary depending on the country or region specification. 3 Press / to select the language, and then press ENTER . Notes on the display information • Characters that cannot be displayed appear as “_”.
