Inhaltszusammenfassung zur Seite Nr. 1
466-1871-PRO Rev A
October 2003
Part No:
60-875
Doors & Motion System
Windows Sensors Status
H O M E S E C U R I T Y
Arm
Disarm
1 / 2 3 / 4 5 / 6 7 / 8 9 / 0
C O D E
Chime
Doors Motion Time Sensor On Off
H O M E C O N T R O L
Bypass Lights
E M E R G E N C Y
FIRE POLICE AUX
Test Weekly
™
Security Pro 1000
User Guide
Inhaltszusammenfassung zur Seite Nr. 2
FCC Notices FCC Part 15 Information to the User Changes or modifications not expressly approved by Interlogix Inc. can void the user’s authority to operate the equipment. FCC Part 15 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses, and can radiate radio frequenc
Inhaltszusammenfassung zur Seite Nr. 3
Inhaltszusammenfassung zur Seite Nr. 4
Contents Introduction to Your Security System 1 Security System Components .....................................................................................................................1 How You Communicate to Your System 2 Control Panel ..............................................................................................................................................2 Remote Handheld Touchpad ......................................................................................
Inhaltszusammenfassung zur Seite Nr. 5
How to Use an Off-Site Phone 10 How to Use Your Touchpads 11 Remote Handheld Touchpad .....................................................................................................................11 System Status ........................................................................................................................................11 ARM Doors & Windows ......................................................................................................................11
Inhaltszusammenfassung zur Seite Nr. 6
Testing 24 Testing Sensors .........................................................................................................................................24 Testing Communication ............................................................................................................................24 Setting the Clock .......................................................................................................................................25 Alarm System Limitations 25
Inhaltszusammenfassung zur Seite Nr. 7
Introduction to Your security system uses wireless technology to warn your family about intrusion, carbon monoxide and fire. It may also be used to control lights and appliances within Your Security your home. The system has the capabilities of communicating with a central monitor- System ing station and sending messages to a numeric pager. This manual describes how to operate your system. It will guide you through program- ming instructions for system features as well as basic arming and dis
Inhaltszusammenfassung zur Seite Nr. 8
Outdoor Motion Sensors detect motion in a protected outdoor area. When motion is detected, the system may respond by sounding chimes or turning on outside lights. These sensors are not used for intrusion detection. Door/Window Sensors detect the opening of a door or window. Smoke Sensors detect smoke and a significant rise in temperature. They have a built in siren that sounds when smoke or a significant rise in temperature is detected. Freeze Sensors detect furnace failure. If the inside te
Inhaltszusammenfassung zur Seite Nr. 9
How to Use Your Control The panel interface consists of four rows of buttons. Panel Note HOME SECURITY It may be necessary to enter CODE an access code to arm your system. Check with your HOME CONTROL installer to see if this feature is enabled. EMERGENCY HOME SECURITY / ;
! - , " " ) $ + . The Home Security buttons are used to arm and disarm doors, windows and m
Inhaltszusammenfassung zur Seite Nr. 10
Quick Exit Note The Quick Exit feature is used when someone wants to briefly leave while the home is The designated door may be still armed (i.e. get the newspaper). This feature needs to be enabled by your installer. opened and closed once. If When you press the Disarm button the panel will announce exit time on. This will allow you close the designated a designated exit door to be open for up to 2 minutes without triggering an alarm. door behind you when you exit, you will have to dis
Inhaltszusammenfassung zur Seite Nr. 11
Disarming Your System 1. Upon reentering your home the entry delay will begin. 2. Status beeps will sound. 3. Enter your access code using the Code buttons. Panel announces, System disarmed and the Disarm light will be lit. If you enter you home and you hear alarm sirens, or if controlled lights that should be off are on, an intruder may be inside or another emergency may ! have occurred. Leave immediately and call for help. Warning Subdisarm Your System ! 1. Enter your Master Access Code
Inhaltszusammenfassung zur Seite Nr. 12
pressed and a sensor or module is not associated (programmed) with this feature the panel will announce, Function not available. Chime Doors Chime Doors is used to signal (chime) when a protected door is opened while the sys- tem is disarmed. The panel will announce the door that has been tripped and chime twice (ask your installer how this feature is programmed). This is a nice feature to use if you’re busy in one part of your home and you want to know when family members are going in and o
Inhaltszusammenfassung zur Seite Nr. 13
Sensor Activated Lights Turn on designated lights (with Lamp Modules) when a sensor is tripped. You can pro- gram lockout times when Sensor Activated Lights won’t be active (see Programming Options 36 and 37). Turn Sensor Activated Lights On: 1. System must be disarmed. Press Sensor Lights button. Panel will announce, sensor activated lights on. Sensor Lights button will be lit. Turn Sensor Activated Lights Off: 1. Press Sensor Lights button. Panel will announce, sensor activated lights off
Inhaltszusammenfassung zur Seite Nr. 14
How Your Your system responds to you through the use of panel voice messages, status beeps, alarms, panel indicator lights, and to a numeric pager if programmed. System Communicates Panel Voice Messages to You When you press the buttons on the panel or the touchpads, the panel responds with voice messages. Panel voice can be enabled or disabled (see “Options”). Note These messages may respond with system information or prompt you to take further The panel will not give voice action. For e
Inhaltszusammenfassung zur Seite Nr. 15
Alarm Siren and X10 Light Information Fire Intrusion Emergency X10 Lights Steady Flashing Steady X10 Siren Steady Steady Alarm beeps Interior & Panel Siren Temporal 3 Steady Fast on/off Exterior Siren Temporal 3 Steady Panel Indicator Lights Use the following table to understand the panel indicator lights. Panel Indicator Lights When the Button Light is When the Button Button On Flashes Arm Doors & Windows Doors/Windows armed Doors/Windows armed & No Entry Delay on Arm Motion Sensors Motion S
Inhaltszusammenfassung zur Seite Nr. 16
Canceling and One of the biggest concerns you might have regarding your security system, is causing an accidental alarm. Most accidental alarms occur when leaving the residence after Preventing arming the system, or, before disarming the system upon your return. Accidental Alarms Canceling Accidental Alarms There is a communicator delay (Dialer Delay) of 30 seconds programmed into this panel. The panel will delay 30 seconds before dialing the central monitoring station or a numeric pager t
Inhaltszusammenfassung zur Seite Nr. 17
Phone Commands Panel Function Phone Command ARM Doors/Windows with No Entry Delay ‚ + CODE + 2 + 2 + 3 + 3 and Motions with Latchkey Lights On/Off ‚ + CODE + 0 System Status ‚ + CODE + # + 1 AVM ‚ + CODE + 5 + X (X = a command from the Audio Verification Set, 1=Talk, 2=VOX, 3=Listen) Hang Up ‚ + CODE + 9 If you are interactive with your panel and the panel hangs up on you, the system is calling in a report to the central monitoring station or a pager, due to an action made by you or someone
Inhaltszusammenfassung zur Seite Nr. 18
Lights Turn on individual lights that are controlled by Lamp Modules: 1. Press Lights On button once. 2. Press the number of the lamp module you want to turn on. Panel will announce, light on. Turn off individual lights that are controlled by Lamp Modules: 1. Press Lights Off button once. 2. Press the number of the lamp module you want to turn off. Panel will announce, light off. Emergency Press both EMERGENCY buttons for 3 seconds to cause the system to call a central mon
Inhaltszusammenfassung zur Seite Nr. 19
Inhaltszusammenfassung zur Seite Nr. 20
START MENU Version 3 Add Delete Cancel Test System should be checked by a qualified technician Press for program * at least every three years. information. MAIN MENU Light Sensor/ Access Clock Control Option # Remote Code Set * * * 0 1 2 3 Note: CONTROL MENU Entry/Exit Hold key or press Unit # Delay Sensors Time - Hours + repeatedly until you * * * hear the desired item. 45 6 78 9 Instruction Delete - Minutes + Summary To delete an option or access code Delete Add Option press and follow the voi
