Inhaltszusammenfassung zur Seite Nr. 1
D623 Series/D625 Series
User's Guide
EN Keypads
Inhaltszusammenfassung zur Seite Nr. 2
D623 Series/D625 Series | User's Guide Figure 1: Information Box M A C I : Y LARM OMPANY S CALL BEFORE TEST: ____________________________ THIS SECURITY SYSTEM IS CONNECTED TO TELEPHONE NUMBER: ____________________________________ THE SECURITY CONTROL PANEL IS CONNECTED TO THE PHONE JACK LOCATED: ____________________________________ TRANSFORMER LOCATION: _________________________________ CIRCUIT BREAKER NUMBER: _______________________________ 2 Bosch Security Systems | 9/04 | 46841E
Inhaltszusammenfassung zur Seite Nr. 3
D623 Series/D625 Series | User's Guide | Contents . Contents About this User Guide...................................................5 View Alarm Memory (Cmd 40) ................................ 21 Introduction .......................................................................5 View System Trouble (Cmd 42)................................ 21 Security System Basics...................................................6 View Point Trouble (Cmd 48) ................................... 22 What
Inhaltszusammenfassung zur Seite Nr. 4
D623 Series/D625 Series | User's Guide | Contents Figures Figure 1: Information Box ..........................................2 Figure 2: D623 Series and D625 Series Features .....5 Figure 3: Controlled Points are All On.....................6 Figure 4: Controlled Points are Part On ...................6 Figure 5: Date and Time format ..............................16 Figure 6: Display layout............................................31 Figure 7: Pager Display format ....................
Inhaltszusammenfassung zur Seite Nr. 5
D623 Series/D625 Series | User's Guide | About this User Guide . About this User Guide This User’s Guide shows you how to use and maintain Control of your security system is achieved through the your security system. It covers basic functions, such as keypad, which offers a variety of basic and advanced turning the system on and off. features. Its function, versatility, and ease of operation make it ideal for home or office use. The keypad is The functions described in this guide are prog
Inhaltszusammenfassung zur Seite Nr. 6
D623 Series/D625 Series | User's Guide | Security System Basics Security System Basics What is a Point? All On A Point is a detection device or group of devices When you turn your system All On you are turning on connected to your security system. Points are identified all controlled points, both interior (motion detectors) by the area they monitor, such as a front door, and perimeter (doors and windows of the building). bedroom window, or hallway. What is a Faulted Point? Figure
Inhaltszusammenfassung zur Seite Nr. 7
D623 Series/D625 Series | User's Guide | Keypad Keys . Keypad Keys Keypad Tones Your Text keypad has nineteen keys for performing The keypad emits several distinct tones and illuminates the various functions described below: lights to alert you to system events. Table 1: Keypad Keys Table 2: Keypad Tones Key Function Tone Description [1], [2], [3], Numeric keys used to enter passcodes Fire Alarm When fire point activates, the keypad emits [4], [5], [6], and issue commands. a r
Inhaltszusammenfassung zur Seite Nr. 8
D623 Series/D625 Series | User's Guide | Keypad Tones Fire Trouble Events Keypad LED Descriptions When a fire trouble (such as a loose wire) occurs, your The keypad LEDs are described below. keypad emits a Trouble tone. The keypad displays the System Trouble message. Table 3: Keypad LED Descriptions Refer to Check System Troubles (Cmd 4) on page 20 for more information on determining the nature of the LED State Description trouble. Status On No system troubles present. Non-Fire
Inhaltszusammenfassung zur Seite Nr. 9
D623 Series/D625 Series | User's Guide | Check System Status . 3. Press and hold [CMD] to remove the alarm Check System Status messages from the keypad display. Refer to Section View Alarm Memory (Cmd 40) on page 21 to When the system is Off, press [CMD] to show the see which points caused the alarm. current system status. The following message may appear: Table 4: System Status Messages System Status Description Message System OK Indicates there are no system troubles. System
Inhaltszusammenfassung zur Seite Nr. 10
D623 Series/D625 Series | User's Guide | Keypad Adjust (Cmd 49) 2. Enter your passcode to turn the system off. Once Keypad Adjust (Cmd 49) the system is off and there are no faulted points, the keypad displays the idle text (second line) as I can perform this command. shown below: I cannot perform this command. Smiths Residence OK for All On Use Command 49 to adjust the keypad sounder volume and the display brightness. 1. Press [CMD] [4] [9]. Enter a valid passcode if Turn the S
Inhaltszusammenfassung zur Seite Nr. 11
D623 Series/D625 Series | User's Guide | Turn the System Part On (Part On or Cmd 2) . 3. Enter your passcode if necessary. Exit delay time begins. The On indicator turns on. Exit the Turn the System Part On (Part building now. On or Cmd 2) 60 seconds to Exit Delay Time (to be filled in by your security All On. company). Enter your passcode to stop the system from You have __________ sec. to exit premises before turning on during the exit delay. system turns on. Press [BYPASS] to by
Inhaltszusammenfassung zur Seite Nr. 12
D623 Series/D625 Series | User's Guide | Turn the System Part 2 On (Cmd 3) 4. During the last 10 sec. of Exit Delay, the keypad 4. During the last 10 sec. of Exit Delay, the keypad displays Do not exit! and emits a double tone displays Do not exit! and emits a double tone every second to warn you not to exit and to turn every second to warn you not to exit and to turn the system off. The system turns Part On. The On the system off. The system turns Part 2 On. The indicator remains on ste
Inhaltszusammenfassung zur Seite Nr. 13
D623 Series/D625 Series | User's Guide | Turn the System On with No Exit Tone (Delay Silent) . 2. Press [ALL ON] if you want to turn the system All The keypad scrolls the following for Part On (the On, or press [PART ON] if you want to turn the display shows Part 2 On if the system is Part 2 system Part On. Press [CMD] [3] if you want to On): turn the system Part 2 On. The keypad may No exit time! prompt you to enter a valid passcode. System arming. 3. Enter your passcode if necessary.
Inhaltszusammenfassung zur Seite Nr. 14
D623 Series/D625 Series | User's Guide | Table 5: Silencing Exit Tone Turn the System On with Points Faulted (Force Arm) Arming With To Silence Exit Tone All On Press and hold [ALL ON] Force-arming is not permitted for UL OR applications. Press [CMD], then press and hold [1]. Part On Press and hold [PART ON] I can perform this command. OR I cannot perform this command. Press [CMD], then press and hold [2]. 1. Press [ALL ON] or [PART ON] to turn the system Part 2 On
Inhaltszusammenfassung zur Seite Nr. 15
D623 Series/D625 Series | User's Guide | View Faulted Points . View Faulted Points Bypass Points To correctly turn your system on, all doors and I can perform this command. windows must be in the normal (not faulted) condition. I cannot perform this command. Use this command to locate faulted points. 1. Ensure the system is turned off (On indicator off). Use this command to bypass one or more points before turning the system All On, Part On, or Part 2 On. You 2. Press [*]. If poin
Inhaltszusammenfassung zur Seite Nr. 16
D623 Series/D625 Series | User's Guide | Date and Time (Cmd 45) Date and Time (Cmd 45) Change Passcode (Cmd 55) I can perform this command. I can perform this command. I cannot perform this command. I cannot perform this command. Use this command to program the system date and Use this command to change your passcode at any time. time. However, only use this feature under the direction of your security company. The system 1. Ensure that the system is turned off (On indicator m
Inhaltszusammenfassung zur Seite Nr. 17
D623 Series/D625 Series | User's Guide | Change Others’ Passcodes (Cmd 56) . 8. Enter the new passcode again. Change Others’ Passcodes 9. The keypad displays the following to confirm the passcode change. (Cmd 56) Code 2 changed. I can perform this command. I cannot perform this command. 10. Repeat Steps 4 through 9 to change another passcode or press [CMD] to exit this feature. Use this command to change passcodes for each user Pressing [CMD] again returns to the normal in the
Inhaltszusammenfassung zur Seite Nr. 18
D623 Series/D625 Series | User's Guide | Add a Passcode (Cmd 56) 4. Press [2] to change passcode authority levels. The keypad display scrolls: Add a Passcode (Cmd 56) To change level I can perform this command. for code 3, I cannot perform this command. Press 3*. Use this command to add new passcodes to the system. This command requires the appropriate authority level To change level to add passcodes. To add a new passcode to the for code 4, system, you must assign an area(s) to th
Inhaltszusammenfassung zur Seite Nr. 19
D623 Series/D625 Series | User's Guide | Delete Passcodes (Cmd 58) . 9. When the display prompts, Please enter new code, enter a new passcode. If the error tone sounds, try Delete Passcodes (Cmd 58) a different new passcode. Enter the new passcode I can perform this command. again for verification. I cannot perform this command. 10. Press [CMD] twice to return to the three Cmd 56 selections. Then press [2] to assign a passcode Use this command to delete passcodes. This command aut
Inhaltszusammenfassung zur Seite Nr. 20
D623 Series/D625 Series | User's Guide | Renew One-time Passcodes (Cmd 53) Renew One-time Passcodes Check System Troubles (Cmd 4) Your system emits a trouble tone and displays the (Cmd 53) System Trouble message to alert you to a system I can perform this command. trouble event, like low batteries. Use this command to I cannot perform this command. learn what is causing the trouble and the steps to take to correct it. One-time passcodes can only be used once to turn the 1. The s
