Inhaltszusammenfassung zur Seite Nr. 1
Speco Internet Protocol (SIP)H.264
Series Camera Instruction Manual
(Version 1.0.0)
SIP H.264 Megapixel Cameras
SIPMPBVFH & SIPMPDVFH
Speco Technologies
200 New Hwy, Amityville, NY 11701
i
800-645-5516 www.specotech.com
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents 1. FEATURES ....................................................................................................... 1-1 1.1 Package ..................................................................................................................... 1-1 1.2 Dimension and Connector Description ..................................................................... 1-2 1.2.1 Dimensions .............................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
Profile Upload .......................................................................................................................... 2-55 Save & Reboot ......................................................................................................................... 2-56 Logout ...................................................................................................................................... 2-56 APPENDIX .........................................................
Inhaltszusammenfassung zur Seite Nr. 4
Inhaltszusammenfassung zur Seite Nr. 5
1. FEATURES 1 1.1 Package SIPMPBVFH Camera SIPMPDVFH Camera Software CD Quick Install Guide Accessory Pack Cross LAN Cable Power Lead Cable Package of Products is composed of the main body of the camera, Software CD (NVR Program, Product Manual, NVR Manual), Quick Install Guide, Cross LAN Cable, Accessory Pack, Power Lead Cable. Please check before starting installation. 1-1
Inhaltszusammenfassung zur Seite Nr. 6
1.2 Dimension and Connector Description 1.2.1 Dimensions 1. SIPMPBVFH ① ② ③ ④ ⑤ ⑥ 1-2
Inhaltszusammenfassung zur Seite Nr. 7
2. SIPMPDVFH ① ② ③ ④ ⑤ 1-3
Inhaltszusammenfassung zur Seite Nr. 8
1.2.2 Connector Description ① 12 Volts DC Power Input ② Audio Output ③ Audio Input : The SIP Camera supports one audio input and output ④ Ethernet Port : Standard RJ45 connector. Supporting POE. ⑤ Reset Button (** Please open the case for the Bullet / Dome type camera ) Step 1 : Switch off SIP Camera by disconnecting the power cable. Step 2 : Using a suitable pointed object, press and continue to hold the Reset Button. While continuing to hold the reset button, reconn
Inhaltszusammenfassung zur Seite Nr. 9
2. INSTALLATION 2 2.1 Recommended PC Specification CPU Core2Duo 2.13GHz and above Memory 2 GB or above Windows XP with SP2 or above. Windows Vista / Windows 2003 / Windows 7 Operating System Internet Explorer 6.0 SP2 and above. Video Resolution SVGA or XGA with 1024x768 resolution Core2Duo 2.13GHz and above CPU 2-5
Inhaltszusammenfassung zur Seite Nr. 10
2.2 Preparation before setup To configure your IP device, you have to use Internet Explorer to log in. Before that, your PC’s network settings and the IP device’s IP address must be set up. Make sure all the connections are connected correctly, and then follow the procedures below. 1. Setup your PC network You have to match your PC’s TCP/IP setting with the IP device’s default settings before you can use IE browser to login it. This section tells you how to setup your PC’s TCP/IP set
Inhaltszusammenfassung zur Seite Nr. 11
The procedure below is the setup procedure of a PC using Windows XP as its OS. When running an OS other than Windows XP, please refer to the manual included with the OS. STEP 1 Start up your PC. STEP 2 Click the [Start] and select the "Control Panel" 2-7
Inhaltszusammenfassung zur Seite Nr. 12
STEP 3 Double-click the "Network and Internet connections" icon. STEP 4 Double-click the "Network connections" icon 2-8
Inhaltszusammenfassung zur Seite Nr. 13
STEP 5 Click “Local Area Connections”, and then click “Change settings of this connection” in the network Task menu. STEP 6 Click “Internet Protocol (TCP/IP)”, and then click the [Properties] button. 2-9
Inhaltszusammenfassung zur Seite Nr. 14
STEP 7 Click the “Use the following IP address” radio button and enter the IP address and the subnet mask. Please set the settings as below. IP address: 192.168. 0.xxx Subnet mask: 255.255.255. 0 (NOTE: xxx should be a number from 1 to 254, but 100 is excepted.) STEP 8 Click the [OK] button and the window dialog box closes. 2-10
Inhaltszusammenfassung zur Seite Nr. 15
2.3 Configuring the IP device This section describes how to configure the IP device. The product administrator has unlimited access to all setup windows and normal users can only watch the live image. The IP device is configured under a standard browser (Microsoft Internet Explorer 6.0 or above). Follow the procedures below to configure the IP device. STEP 1: Open a browser STEP 2: Enter the IP address of the IP device. The default IP address is “192.168.0.100” The “Login Page”
Inhaltszusammenfassung zur Seite Nr. 16
2-12
Inhaltszusammenfassung zur Seite Nr. 17
2.3.1 Video Display This section tells you how to view live images via Internet Explorer. Click the [Live] tab to show [Live page]. Refer to the table below for how to configure each setting. Function List Function Description Full Screen Click the icon to stretch the preview to full screen. You can click “Esc” button on the keyboard to return to previous display. Snapshot Click the icon “ ” to take a snapshot. The snapshot picture will be saved to the default folder “C:\U
Inhaltszusammenfassung zur Seite Nr. 18
Audio out Click the icon to enable the audio out from PC to IP camera or video server. When it is enabled, your voice will be transferred to the audio out of the IP camera or video server. NOTE: you will need to have a microphone connected to your PC to do that. If dual stream mode is enabled, click to select which Media stream to display (Media 1 or 2). The default is single stream only. To change to dual stream mode, please refer to “Media 1” section under “Setup” tab
Inhaltszusammenfassung zur Seite Nr. 19
not zoomed-in (no zoom status). Indicates the network state. If the light on the right is Network green, it means the network is ok. If the light is gray, it status means the network is broken. The light on the left is not used DO Setting Click to set DO output level to High. Click to set DO output level to Low. If your device has more than one DO available, each DO is controlled separately. If you want to setup this IP camera/video server, please click the [Setup] tab t
Inhaltszusammenfassung zur Seite Nr. 20
2.3.2 Date & Time This section tells you how to setup IP device’s date and time settings. STEP 1: Click the [Date & Time] on the “Main Setup page”. The “Date setting page” is displayed as below STEP 2: Configure these settings with reference to the table below. If you are still unsure what to set, contact your system administrator. Date Setting Parameters Description Click this to enable IP device’s SNTP/NTP function. This enables this IP device to synchronize its time setting
