Bedienungsanleitung SkyLink MOFON SENSOR ID-318

Inhaltszusammenfassung zur Seite Nr. 1

Motion Sensor Model ID-318
1. INTRODUCTION 3. CUSTOMIZING THE MOTION SENSOR
TM
Thank you for your purchase of a SkylinkHome Motion Sensor, Model To customize your motion sensor, open up the battery compartment door
ID-318. The Motion Sensor allows you to activate a receiver module to and set the jumper connectors according to your needs.
turn lights on automatically when movement is detected. A built-in count-
down timer can turn lights off after a predefined time period. This is ideal
for

Inhaltszusammenfassung zur Seite Nr. 2

3. CUSTOMIZING THE MOTION SENSOR (CONT) 6. ERASING MOTION SENSOR FROM RECEIVERS Erasing Motion Sensor from the Dimmable Receiver Module If the jumper connector is in place, the light sensor threshold is set to model MD-318 or On / Off Receiver Module model MR-318 dark, a motion activation signal will You may erase a transmitter from the receiver module, but you cannot not turn on the lighting receiver erase a specific device directly, you must erase all the wireless devices, unless the env