Bedienungsanleitung SkyLink GM-434TL

Inhaltszusammenfassung zur Seite Nr. 1

Garage Door
TM
Model GM-434TL
Monitor Sensor
2. PROGRAMMING (CONT)
1. INTRODUCTION
TM
The Garage Door Monitor Sensor is designed to monitor the status of
1) Zone LED of this sensor will flash.
your garage door and advise you if the door is open. When the garage 2) Beeping according to the zone number [Operating mode is set to
door is open, receiver will flash along with alert beeping or alarm.
“Alert”]. 1 beep for zone 1, 2 beeps for zone 2 and etc, until the
detection rod is retracted.
TM
In t

Inhaltszusammenfassung zur Seite Nr. 2

4. OPERATION 5. LOSS OF SIGNAL INDICATION ® There are 3 different operating modes for the Household Alert Long When the battery level on the sensor drops to a certain level, or the Range Receiver. sensor is out of the operating range, the receiver will show a “loss of signal” indication. The red LED representing that zone will flash rapidly, 1) Alert - Beeps when a sensor is activated, corresponding zone LED i.e. if zone 1 sensor is lost, the zone 1 red LED will flash rapidly. will also flash.