Bedienungsanleitung Panasonic WV-NP1000

Inhaltszusammenfassung zur Seite Nr. 1

i-Pro series camera upgrade guide
Maintenance guide
1. Outline
This manual describes how to upgrade the firmware of the i-Pro series cameras listed below.
Applicable models: WV-NP240 series, WV-NP1000 series,WV-NS202 series, WV-NF284 series, WV-NW484 series,WV-NS950
series, WV-NW960 series, WV-NF302 series, WV-NP304 series.
The procedure includes "setup data backup", "firmware loading" and "setup data restore".
2. Preparation
The following item

Inhaltszusammenfassung zur Seite Nr. 2

i-Pro series camera upgrade guide Maintenance guide 4. Uploading the firmware The firmware upload is performed through the browser GUI. (1) Open the Setup/Maintenance menu (2) Open the Upgrade tab menu (3) Click "Browse" and navigate to the correct firmware (e.g. "np244_xxxxx.img") and select the firmware. (4) Select whether you wish to initialize the setup data during the upgrade process by the radio button. (5) Click "Upgrade". Confirmatio

Inhaltszusammenfassung zur Seite Nr. 3

i-Pro series camera upgrade guide Maintenance guide (1) Open the command prompt. (2) Move to the directory where you have saved the setup data by using "cd" command. (3) Enter "FTP 192.168.0.10 (IP address of the camera)". (4) Enter the User Name and Password. The default User Name is "admin", password is "12345". "230 User admin logged in" will be displayed when successful. (5) Enter "cd C:" to move to the C drive of the camera. "250 CWD co