Inhaltszusammenfassung zur Seite Nr. 1
Using Your
XP-600
Security System
NAPCO
© NAPCO 2005 OI301 1/05
1
Inhaltszusammenfassung zur Seite Nr. 2
Introduction Congratulations on your purchase of an advanced NAPCO EXPRESS XP-600 Security System. Meticulously developed by a leading manufacturer of state-of-the-art security products, this system will provide you with unprecedented peace-of-mind and incorporates some of the most sophisticated features available today. Above all, it has been designed with an extra step, to pro- vide all those operating it with very easy, intuitive use. Please review the information contained in this manu
Inhaltszusammenfassung zur Seite Nr. 3
Introduction TABLE OF CONTENTS SYSTEM INFORMATION Keypad Controls and Indicators ........................................ 4 Arming your System (When Leaving) ................................ 5 Central Station Phone Number: ____________________ Protecting Yourself While Home ........................................ 6 Emergency Keys ............................................................... 7 Central Station Account Number: ____________________ Disarming the System ..................
Inhaltszusammenfassung zur Seite Nr. 4
Keypad Controls and Indicators Numerical Keys 1-9, 0. Used to enter W Armed Light will light when system is Armed, * Key Used to enable User Codes, Zone numbers, etc. and will flash when system is in Alarm. special functions and options. Press *and X Ready Light will light when all zones are se- then the corresponding Special Function num- cure and system is ready to be Armed. ber Option (See Special Functions, Page 11) H System Light will light and the Keypad sounder will pulse
Inhaltszusammenfassung zur Seite Nr. 5
Arming Your System Arming Your System When Leaving 1 Before arming your system, make sure the Green X Ready light is ON. This indicates that all of your protective zones are secure. If any zones are open, the corresponding Zone light will be ON. Secure these zones before proceeding. If any zones cannot be secured, see Bypassing Zones below. 2 X W Enter your user code. The Green Ready light will go out, the Red Armed light will light. • If you make a mistake entering your code, pre
Inhaltszusammenfassung zur Seite Nr. 6
Arming Your System Protecting Yourself While at Home 1 Before arming your system, make sure the Green X Ready light is ON. This indicates that all of your protective zones are secure. If any zones are open, the corresponding Zone light will be ON. Secure those zones before proceeding. 2 Enter your user code. The Green X Ready light will go out, and the Red W Armed light will light. 3 Before your exit delay expires, press C to bypass any interior zones, deactivating devices such a
Inhaltszusammenfassung zur Seite Nr. 7
Emergency Conditions E Fire E F G e Emergency Emergency Buttons E F G Enabled? Yes The three sets of emergency buttons, if programmed, are always active whether the system is armed or disarmed. Discuss these Buttons with your installer. The emergency signal will only be activated when the two respective buttons are pressed at the same time. F Auxiliary F Emergency Fire Alarm: Simultaneously press E+E to sound a fire alarm, and to alert the c
Inhaltszusammenfassung zur Seite Nr. 8
Disarming Your System / Silencing an Alarm Disarming Your System when Returning 1 Enter your premises through the Entry/Exit door. The keypad will sound a steady tone to remind you to dis- arm the system before your Entry Delay time expires. 2 Enter your user code. The Red W Armed light will go out, indicating that the system has been disarmed. Note: If you make a mistake entering your code, press the B key and re-enter the code. Alarm Indication If the Red W Armed light is fla
Inhaltszusammenfassung zur Seite Nr. 9
Fire Protection Preparing a Fire Escape Plan Even with the most advanced fire alarm system, adequate protection requires an escape plan. To prepare your plan, draw floor plans of your building (space is provided on the next page). Show two exits - a front or back door and a win- dow from each room. (Make sure each window opens. You may need a special fire-escape ladder if the window is high up). Write down your outside meeting place. Family Rehearsal Would You Like More Safety
Inhaltszusammenfassung zur Seite Nr. 10
Fire Protection Floor Plan Draw a plan of your premises below. 10
Inhaltszusammenfassung zur Seite Nr. 11
Special Functions A By pressing A followed by the appropriate key, (do not press simultaneously) these special functions and features can be enabled: A 0 Easy Arm (when system is disarmed) A 4 Instant Mode The Easy Arm feature allows the system to be armed by Pressing A followed by 4 will cancel the Entry delay and pressing A followed by 0. This will allow the easy arm- put the system into the Instant mode. This is typically used ing of the system by someone who is not a regular system
Inhaltszusammenfassung zur Seite Nr. 12
H System Troubles The XP-600 is constantly monitoring its own components, as well as all critical services, such as AC Power and the Telephone line, to insure that it is always ready to provide the protection for which it was designed. When a system trouble does occur, it will caution you by lighting the yellow HSYSTEM light and beeping the keypad buzzer. If you cannot immediately clear the system trouble, the system can still D be used. Simply press to view the trouble as described bel
Inhaltszusammenfassung zur Seite Nr. 13
H System Troubles Keypad Beeps or Zone light System Trouble Action ON Condition HSYSTEM Flashes 2 Beeps 2 Fire Trouble A problem has been detected in the Fire Circuit. Call installing company for service. 2 Beeps 3 Wireless A problem has been detected with the wireless receiver. Receiver Trouble Call installing company for service. 2 Beeps 4 Wireless A problem has been detected with a wireless receiver. Receiver Jam Call installing company for service. 3 Beeps 1-6 Wireless Th
Inhaltszusammenfassung zur Seite Nr. 14
Programming User Codes Your Installer has assigned a User 1 Code which may be used to not only Arm and Disarm the system, but also to enter the User Program Mode, where you can program other user codes. The following explains how you will use this code to program or erase additional user codes. Entering the User Program Mode Press A followed by 8 and then enter the User 1 code. The W Armed, X Status and H System Lights will flash, and the keypad will beep 4 times. You are now in the U
Inhaltszusammenfassung zur Seite Nr. 15
Glossary the zone number to bypass a zone. Ambush Code - In the event that you Keypad Sounder - A local warning de- are forced by an intruder to disarm your vice at the keypad to alert that Entry de- Central Station - Monitors alarm, emer- system, this special code can be used to lay has started. gency and trouble reports from the alarm disarm the system, and simultaneously system and notifies proper authorities. send a silent alarm to Central Station. If System Trouble - A prob
Inhaltszusammenfassung zur Seite Nr. 16
NAPCO LIMITED WARRANTY NAPCO SECURITY SYSTEMS, INC. (NAPCO) warrants its products to be free from manufacturing de- sumes, nor authorizes any other person purporting to act on its behalf to modify, to change, or to assume fects in materials and workmanship for thirty-six months following the date of manufacture. NAPCO will, for it, any other warranty or liability concerning its products. within said period, at its option, repair or replace any product failing to operate correctly without char
