Inhaltszusammenfassung zur Seite Nr. 1
16 CHANNEL
DIGITAL NETWORK
SURVEILLANCE SYSTEM
Instruction Manual
English Version1.0
MODEL:
QLR1660
www.lorexcctv.com
Copyright © 2007 Lorex Technology Inc.
Inhaltszusammenfassung zur Seite Nr. 2
QLR1660 User Manual IMPORTANT SAFEGUARDS AND WARNINGS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: THIS DEVICE MAY NOT NOTE HARMFULL INTERFERENCE, AND THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY NOTE UNDERSIRED OPERATION. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. NOTE: This equipment has been tested and found
Inhaltszusammenfassung zur Seite Nr. 3
DIGITAL VIDEO RECORDER Important Safety Instructions 1) Read & Retain Instructions All the safety and operating instructions should be read before the appliance is operated. The safety and operating instructions should be retained for future reference. 2) Heed Warnings All warnings on the product and in the operating instructions should be adhered to. 3) Follow Instructions All operating and use instructions should be followed. 4) Cleaning Unplug this product from the wal
Inhaltszusammenfassung zur Seite Nr. 4
QLR1660 User Manual CONTENTS SECTION 1 - PRODUCT INFORMATION 1. Video Capture Card Specifications ….……………………………..…...…………..……………….............. 5 2. System Requirement …..………………………………………………………………................................. 6 3. Package Contents………………………………………………………………………….………................... 6 SECTION 2 - INSTALLATION INTRODUCTIONS 1. QLR1660 Hardware Installations……………………………………………………….............................. 7 1-1. Video Capture Card Installation…………………………
Inhaltszusammenfassung zur Seite Nr. 5
DIGITAL VIDEO RECORDER SECTION 1 - PRODUCT INFORMATION 1. Video Capture Card Specifications Tele-switch Real Time Display Connection pin Audio/Sensor/Relay Card Connector (6pin) I/O D-Sub Ports IO board Reset pin for QLR1660 card Watchdog (4pin) Video Input/Output D-Sub Ports Recording Rate Audio Sensor Relay Product Video Card Video Input Resolution (NTSC / PAL) Input Input
Inhaltszusammenfassung zur Seite Nr. 6
QLR1660 User Manual 2. System Requirement QLR1660 QLR1660-2 OS Windows 98SE / ME / 2000 / XP CPU P-IV 1.6GHz or higher P-IV 3.0GHz or higher Memory more than 256MB HDD 5Gbyte or higher VGA 32MB or higher * * Recommended VGA: RIVA TNT 2, GeForce2 MX 100/200, GeForce2 MX 400, ATI XPERT 2000 Pro, ATI RADEON 7200 [NOTE] You should use the VGA card with Hardware Acceleration function. * A Standalone Grapics card (not integrated with the Motherboard) is essential for the corre
Inhaltszusammenfassung zur Seite Nr. 7
DIGITAL VIDEO RECORDER SECTION 2 - INSTALLATION INSTRUCTIONS 1. QLR1660 Hardware Installations [NOTE] Before installing the video capture card, turn off the computer’s power, unplug the power cable and disconnect all other cables attached to the back of the computer. 1.1 Video Capture Card Installation 1.1.1 QLR1660 Installation The QLR1660 uses a PCI interfaced video capture card that supports to 4, 8, 16 ports. 1. Remove the computer cover. 2. Insert th
Inhaltszusammenfassung zur Seite Nr. 8
QLR1660 User Manual 1.1.5 Watch-dog Installation for QLR1660 If the system is stopped by abnormal operation, watchdog will automatically reboot the computer. The watchdog will restart the computer automatically if it did not receive any response from the system for more than 5 minutes. Each QLR1660 video capture card has a Reset pin (4pin) for watch-dog. It should be connected to the motherboard’s reset jumper and computer’s reset switch. Your motherboards’ RESET pin position might b
Inhaltszusammenfassung zur Seite Nr. 9
DIGITAL VIDEO RECORDER 1.2 Camera Installation Cameras must be attached to the BNC connectors of the D-sub type video input/output cable connected to the video capture cards in a specific order to avoid transmission problems. Cameras need to be installed according to the numerical order marked on the BNC connector. Whether you use 4, 8 or 16 video input cables for 4, 8 or 16 channels system, the pattern is the same - cameras will be installed to the numerical order marked on the BNC con
Inhaltszusammenfassung zur Seite Nr. 10
QLR1660 User Manual 2. QLR1660 Driver Installations : Applied only to the QLR1660 Server Installation * The screenshots shown below are taken from Windows XP and may vary slightly depending the Operating System 1) When you boot your computer after you have inserted the QLR1660 cards to the PCI slot, Windows will automatically detect the existing card and the following message dialog appears automatically. The first time you install the video card. Insert the QLR1660 Software C
Inhaltszusammenfassung zur Seite Nr. 11
DIGITAL VIDEO RECORDER 3) The system will then find the video driver in the Software CD. Select the driver for your QLR1660 card from the list. Click also Next button here. Video driver for QLR1660, QLR1660-2: "WJ2160 Video Capture Device Ver5.0" 4) When the driver is located, the below screen will be shown. Click the Continue Anyway button to proceed. 11
Inhaltszusammenfassung zur Seite Nr. 12
QLR1660 User Manual 5) After the video driver installation finished, click the Finish button. 6) You need to continue installing the audio driver. Select Install the software automatically (Recommended) and click the Next button. Audio driver for QLR1660, QLR1660-2: "WJ2160 Audio Capture Device Ver5.0" 12
Inhaltszusammenfassung zur Seite Nr. 13
DIGITAL VIDEO RECORDER 8) When the driver is located, the below screen will be shown. Click the Continue Anyway button to proceed. 9) After the audio driver installation finished, click the Finish button. For QLR1660 you are asked to repeat the procedures 4 times and for QLR1660-2, 8 times. - Video driver for QLR1660, QLR1660-2: "WJ2160 Video Capture Device Ver5.0" Audio driver for QLR1660, QLR1660-2: "WJ2160 Audio Capture Device Ver5.0" 13
Inhaltszusammenfassung zur Seite Nr. 14
QLR1660 User Manual If you have installed QLR1660 , you will find the system’s device manager looking like the following figure. 3. QLR1660 Software Installations (Server, Client, Search) [NOTE] You will need the product’s serial number to complete the installation of the software. The serial number may be found on the CD-ROM. 1) Begin the software installation by double-clicking the Setup.exe icon in Install directory on the provided CD. 14
Inhaltszusammenfassung zur Seite Nr. 15
DIGITAL VIDEO RECORDER 2) In “VISTAPRO Version 1.0” dialog, click the Next button. 3) “Select Component” dialog appears. Choose one among 4 options that you want to install. Click Next button. 4) “Customer Information” dialog appears. Enter your (or your company’s) name and the product Serial Number. Click Next button. 15
Inhaltszusammenfassung zur Seite Nr. 16
QLR1660 User Manual 5) “Choose Destination Location” dialog appears. Select folder where Setup will install files. Click Next button. [CUASE] The default installation directory is C:\Program Files\VISTAPRO. When install is complete the following icons will be displayed on the desktop 16
Inhaltszusammenfassung zur Seite Nr. 17
DIGITAL VIDEO RECORDER 6) “Select Program Folder” dialog appears. Choose a program folder name for this QLR1660 server system and click Next button. 7) “Start Copying Files” dialog appears. Click the Next button. 8) If installing the files is finished, you choose whether or not register the QLR1660 Server on Startup Menu. 9) After this, if the following dialog appears, click the Yes button here. [REFERENCE] If DirectX 8.1 software is already installed, it is
Inhaltszusammenfassung zur Seite Nr. 18
QLR1660 User Manual 10) Click also Yes button here. 11) Click also Yes button here. 12) Click OK button. Now you have successfully installed the DirectX8.1 for QLR1660 system. [REFERENCE] If DirectX 8.1 software is first installed, your computer with Windows 98 or ME will be restarted. 18
Inhaltszusammenfassung zur Seite Nr. 19
DIGITAL VIDEO RECORDER 13) Before you use this QLR1660 program, must restart your computer. Choose Yes, I want to restart my computer now and click OK button to finish setup. 14) After a moment, computer restarts and operates the QLR1660 Server system. And QLR1660 server will be displayed automatically on the main screen. * QLR1660 Server icon , Client icon , Search icon . 19
Inhaltszusammenfassung zur Seite Nr. 20
QLR1660 User Manual SECTION 3 - HOW TO USE QLR1660 SERVER 1. Main Interface Window When entering the Server Program, the main interface screen will open as shown below. There are several view modes for efficient monitoring such as single channel, division screen (multi channel), and auto rotation view modes. Launch the QLR1660 Server program by double-clicking the QLR1660 Server icon ( ) on the desktop. Screen Channel Screen Window 20
