Inhaltszusammenfassung zur Seite Nr. 1
via30+, VISTA 10,411lXM
N7229 7194 ADEMCO
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS ........................................... ARMING PERIMETER ONLY (INSTANT) ................... 17 SYSTEM OVERVIEW 3 General ............................................................................. 3 ARMING ALL PROTECTION (AWAY). ....................... 18 3 Consoles ............................................................................ ARMING ALL PROTECTION (MAXIMUM). .................. 19 .......................................................................
Inhaltszusammenfassung zur Seite Nr. 3
SYSTEM OVERVIEW Congratulations on your ownership of an Ademco Security System. You’ve GeneraI made a wise decision in choosing it, for it represents the latest in security protection technology today, including microcomputer technology to monitor all system status. Ademco is the world’s largest manufacturer of security systems and millions of premises are protected by Ademco systems. Basically, this system offers you three forms of protection: burglary, fire and emergency. Your system may consi
Inhaltszusammenfassung zur Seite Nr. 4
SYSTEM OVERVIEW Fire Protection The fire protection portion of your security system (if used) is always on and will sound an alarm if a fire condition is detected. Refer to the F/RE ALARM SYSTEM section for important information concerning fire protection, smoke detectors and planning emergency exit routes from your house. Alarms when an alarmoccurs,boththe console and external sounders will sound, and a message at the console will identify the zone(s) causing the alarm. In addition, if your sys
Inhaltszusammenfassung zur Seite Nr. 5
ABOUT THE CONSOLES General Your consoles allow you to control all system functions. The consoles feature a telephone style (digital) keypad and a Liquid Crystal Display (LCD) which shows the nature and location of all occurrences. The consoles feature a built-in sounder which emits alarm sounds during alarm conditions and produces warning tones during entry (and exit, if so- programmable) delay periods. The sounder also provides acknowledgement tones when keys are pressed, and confirmation tones
Inhaltszusammenfassung zur Seite Nr. 6
ABOUT THE CONSOLES Fixed-Word Console Displays AWAY All burglary zones, interior & perimeter, are armed. STAY Perimeter burglary zones, such as windows and doors are armed. NO AC AWAY CHIME t?u STAY INSTANT Perimeter burglary zones armed and BAT ALARM INSTANT entry delay is turned off. CHECK ‘YPASS BYPASS One or more burglary protection zones NOT READY FIRE have been bypassed. NOT READY Appears when burglary portion of the system is not ready for arming (due to one or more open protection zones)
Inhaltszusammenfassung zur Seite Nr. 7
ABOUT THE CONSOLES STYLE B CONSOLES SIYLE A CONSOLES (SHOWN WITH KEYPAD COVER REMOVED) 6139 ALPHA CONSOLE 5137AD ALPHA CONSOLE u 1 IJ u 6137 4127 4137AD 612716120 FIXED-WORD CONSOLES FIXED-WORD CONSOLES -7-
Inhaltszusammenfassung zur Seite Nr. 8
FUNCTIONS OF THE CONSOLE SEE TYPICAL CONSOLE ON NEXT PAGE - * READY KEY: Displays all open protection zones. 1. DISPLAY WINDOW: Displays protection zone ID and 11. sstem status messaaes. 12. # KEY: “Quick Arm” key permits ARMING of the system H without use of a security code (if so programmed). 2. w OFF KEY: Disirms burglary portion of the system, silences alarms and audible trouble indicators. and 13. KEYS O-9T: Used to enter your security code(s). clears visual display after problem’ s correct
Inhaltszusammenfassung zur Seite Nr. 9
1 Q 0 Q Q c9 / /@ /7 0 -69 ’ 10 0 ‘0 SHOWN WITH KEYPAD COVER REMOVED TYPICAL ALPHA CONSOLE . . Fixed-Word Consoles are functionally similar, except for screen displays.
Inhaltszusammenfassung zur Seite Nr. 10
SECURITY CODES At the time of installation, your installer programmed a personal four-digit Master General code, known only to you and yours. This code is used to perform most system functions, including arming and disarming of the system. As an additional safety feature, temporary user codes can be assigned (see next page) for use by those not having a need to know the Master code. Note that the Master code remains in effect even when other user codes are assigned. This feature is intended for
Inhaltszusammenfassung zur Seite Nr. 11
SECUR1l’Y CODES To Assign, Change, 1. Enter your Master code and press the CODE key, or Delete 2. Enter single-digit User Number for whom a code is to be assigned, changed, User Codes or deleted. 3. If assigning or changing a user’s code, enter the desired 4-digit code for use by that User Number. The console will beep once. /f deleting a user’s code, perform steps 1 and 2 and then stop. In a few moments the console will beep once, indicating that the existing code has been deleted. Important: ●
Inhaltszusammenfassung zur Seite Nr. 12
ENTRY/EXIT DELAYS Your system has preset time delays, known as exit delay and entry delay. When General Information you arm your system, exit delay gives you time to leave through the entry/exit door without setting off an alarm. Entry delay gives you time to disarm the system when you reenter through the entry/exit door. The system must be disarmed, however, before the entry delay period ends, or an alarm will occur. The console will beep slowly during the entry delay period, reminding you to d
Inhaltszusammenfassung zur Seite Nr. 13
CHECKING FOR OPEN ZONES Using the Before arming your system, all protected doors, windows and other protection zones must be closed or bypassed (see 13YPASS//VG PROTECT/ON ZONES ❑ READY Key section), otherwise the console will display a “Not Ready” message, and if your console has a READY indicator light, it will not be lit.. The READY (~) key can be used to display all faulted zones, making it easier for you to secure any open zone. To display faulted zones, simply press and release the READY (
Inhaltszusammenfassung zur Seite Nr. 14
BYPASSENG PROTECTION ZONES Using the This key is used when you want to arm your system with one or more zones intentionally unprotected. The system must be disarmed first. 6 BYPASS Key ❑ 1. Enter your security code and press the BYPASS key. 2. Enter zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13, etc.). Single digit zone numbers must be preceded by a zero (e.g. 05, 06). 3. When finished, the console will momentarily display a “Bypass” message for each bypassed zone number. Wait
Inhaltszusammenfassung zur Seite Nr. 15
BYPASSING PROTECTION ZONES Quick Bypass If your system supports “Quick Bypass”, it allows you to easily bypass all open (faulted) zones without having to enter zone numbers individually. This feature is useful if, for example, you routinely leave certain windows open when arming at night. To use this feature, enter your security code, press the BYPASS key, then stop. In a few moments, all open zones will be displayed along with a “Bypass” message. Wait for all bypassed zones to be displayed, the
Inhaltszusammenfassung zur Seite Nr. 16
ARMING PERIMETER ONLY WITH ENTRY DELAY ON Using the Use this key when you are staying inside, but expect someone to use an entry/exit door later. 3 STAY Key El 1. Enter ybur security code and press the STAY key. 2. The console beeps three times and displays the armed message. The red ARMED indicator lights. 3. The system arms. An alarm sounds immediately if a protected perimeter window or non-entry/exit door is then opened, but you may otherwise move freely throughout the premises. Later arrival
Inhaltszusammenfassung zur Seite Nr. 17
ARMING PERIMETER ONLY WITH ENTRY DELAY OFF Use this key when you are staying inside and do not expect anyone Using the to use an entry/exit door. 7 INSTANT Key ❑ 1. Enter your security code and press the INSTANT key. 2. The console beeps three times and displays the armed message. The red ARMED indicator lights. 3, The system arms. An alarm’ sounds immediately if any protected perimeter door or window is opened, but you may otherwise move freely throughout the premises. An alarm sounds immediate
Inhaltszusammenfassung zur Seite Nr. 18
.— .-. ---- .-— ———— ————— - WITH ENTRY DELAY ON Using the Use this key when no one will be staying inside. 2 AWAY Key 1. Enter your security code and press the AWAY key. ❑ 2. The console beeps twice and displays the armed message, The red ARMED indicator lights. 3. You may leave through an entrviexit door during the exit delay period without causing an ala~m. After exit delay, the system arms and sounds an alarm immediately if a protected window or non-entry/exit door is then opened, or if any
Inhaltszusammenfassung zur Seite Nr. 19
ARMING ALL PROTECTION WITH ENTRY DELAY OFF Use this key when the premises will be vacant for extended periods Using the of time such as vacations, etc., or when retiring for the night and no one will be 4 MAXIMUM Key ❑ moving through protected interior areas. 1. Enter your security code and press the MAXIMUM key. 2. The console beeps twice and displays the armed message. The red ARMED indicator lights. 3. You may leave through an entry/exit door during the exit delay period — without causing an
Inhaltszusammenfassung zur Seite Nr. 20
DISARMING THE SYSTEM AND SILENCING ALARMS Using the The OFF key is used to disarm the system and to silence alarm and trouble sounds. 1 OFF Key n To Disarm the System Enter your securitv code and Dress the OFF kev. The “Ready” message will be displayed, and the console will emit a single tone to confirm that the system is disarmed. To Silence a Burglary Alarm SEE IMPORTANT NOTE AT LEFT! Enter your security code and mess the OFF kev to silence the alarm (or warning tones of a Memory of Alarm). No
