Inhaltszusammenfassung zur Seite Nr. 1
User’s Manual
Model: EPH5212
HDcctv 12X IP66 Speed Dome
Inhaltszusammenfassung zur Seite Nr. 2
Issue: 1.0 Contents Warnings and Cautions ..........................................................................................................................................3 FCC Compliance statement....................................................................................................................................4 CE Compliance statement...............................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
Issue: 1.0 Warnings and Cautions If you fail to read this information and handle the product incorrectly, death or serious injury may occur. This device MUST be securely anchored to a solid surface in a manner that will resist wind, snow and ice loading, and any other hazard which might compromise the security of the mounting. *Precautions & Safety---------------------------------------------------------------------------------------------------------- Should any liquid or foreign m
Inhaltszusammenfassung zur Seite Nr. 4
Issue: 1.0 Always stop using when the product if it should emit smoke or abnormal heat. Never install the product in area exposed to oil or gas; this PTZ is NOT rated as ‘explosion proof’. Never install the product on a surface that cannot hold its weight. Never touch the power cord with wet hands. Clean only with dry or damp soft cloth. Never install the dome in an environment which exceeds the specifications of the unit.. Never drop the dome or subject it to excessive vibration. A
Inhaltszusammenfassung zur Seite Nr. 5
Issue: 1.0 1. Overview 1.1 Description The EPH5212 is an HDcctv IP66 speed dome camera equipped with autofocus 12X optical zoom plus 10X useable digital zoom with true Day/Night capability, DNR to improve image clarity, BLC/HSBLC and EWDR to handle the most challenging of bright or unbalanced lighting conditions, and DSS to improve low light performance. Based on a 1/2.8” Sony Exmor R progressive scan 2.1 megapixel CMOS sensor for your choice of HD 1080p or 720p resolution 100% di
Inhaltszusammenfassung zur Seite Nr. 6
Issue: 1.0 *The HDcctv Alliance states Look for the unique HDcctv logo to be sure: 100m transmission over even low-grade RG59 Plug-and-play interoperability with other compliant products Forward compatibility with future versions of the standard See www.hidefcctv.org for details 1.3 System Configuration 1.4 Termination Settings [SW303: Refer to 2.4 Dome Camera Settings] To prevent malfunctions and/or interference with communication signals between the camera and controlle
Inhaltszusammenfassung zur Seite Nr. 7
Issue: 1.0 2. Installation and Connection 2.1 Package Contents 7
Inhaltszusammenfassung zur Seite Nr. 8
Issue: 1.0 2.2 Base Installation - Make holes for mounting and cable hole on the wall where the dome camera is to be installed. Attach the arm firmly with the supplied mounting screws (4) or other means which will secure the unit properly to resist wind and snow/ice loading. - After mounting the arm, clip the safety cable to the arm, pass the video and other wires through the arm; there is an access port in the arm if connections will be made at that point. Insert the dome housing
Inhaltszusammenfassung zur Seite Nr. 9
Issue: 1.0 2.3 Connection Interface and Wiring cables *Caution Do not connect the power cable until all other connections have been completed. Be sure to remove the shipping foam ring and sheet before connecting the power to the dome camera. 2.3.1 Connecting the RS-485 lines The dome camera can be controlled remotely by an external device or control system such as a controller using RS-485 half duplexer (RS-485 Connection). For connecting multiple ‘home run’ PTZ cameras, use the
Inhaltszusammenfassung zur Seite Nr. 10
Issue: 1.0 2.4 Setting RS-485 Parameters The device can communicate with external controllers and DVRs by setting the Rotary switches and Dip switches. Refer to the tables below for setting the dome camera ID and protocol. Total length of the cable for communication should not exceed 1km. 2.4.1 Setting the address (ID) of dome camera To prevent incorrect operation or malfunction, each dome camera must have a unique address (ID). The default setting is 0. This corresponds to EVF-
Inhaltszusammenfassung zur Seite Nr. 11
Issue: 1.0 W 3 0 2 S W 3 0 1 S 3 W 3 0 S 3 0 2 J 3. Programming PTZ and Camera Functions and Options [OSD Menu Structure] - Main Menu/Title - Operation Menu 11
Inhaltszusammenfassung zur Seite Nr. 12
Issue: 1.0 -Next Page Continue- 12
Inhaltszusammenfassung zur Seite Nr. 13
Issue: 1.0 This manual is designed to be a reference for the programming and operation of the system. You can see information about features of the dome and commands as well as an operation method. The symbols below mean some action of the joystick controller. ▲/▼: move joystick up and down ◀ / ▶ : move joystick left and right direction ▶ : select or change settings [Tele/Wide]: move joystick clockwise or counter-clockwise for zooming [KEY]: press the defined key.
Inhaltszusammenfassung zur Seite Nr. 14
Issue: 1.0 3.1 Getting Started You should install and connect the dome to an interface device before using this operating guide. Refer to {2. Installation and connection of this manual}. Once installed, apply power to the dome and the start-up screen is displayed on the monitor. Before installing and operating the dome camera, please read this user’s manual carefully. This dome camera can be operated using two methods: - Use hot keys [Refer to Appendix]. - Use OSD Menu o
Inhaltszusammenfassung zur Seite Nr. 15
Issue: 1.0 The title edit menu can be used in the setup for Preset/Pattern/Tour/Scan commonly. - Move the joystick right in Main Menu. The screen appears on the monitor: - Move the joystick right, left, up or down to select a character. - Press [Tele] button to input a character and [Wide] button to cancel the character. - When the label is completed, use [Near] or move the joystick to save the selected title. - If you want to cancel the selected title, return to the previous menu u
Inhaltszusammenfassung zur Seite Nr. 16
Issue: 1.0 The system Information displays model name/Running Version/Protocol/Communication Type/Camera ID No./System. It is read only for reference. Use the following steps to display the System Information screen: Camera ID changes with respect to ID switching setting. - Enter into {Main MENU} - Select {System} using the joystick [ ▶ ]. - Move the joystick right [ ▶ ] for selecting {Info} in the sub menu of {System}. - Press [Far] button or use joystick [ ▶ ] to return
Inhaltszusammenfassung zur Seite Nr. 17
Issue: 1.0 Use this function to initialize all or specific parameters of dome to factory default parameters. - Enter into {Main Menu} - Select {System} using joystick [ ▶ ] and move to {Initialize} in the sub menu of {System} - Select items to be initialized. - Press [Near] button or use joystick [ ▶ ] to select {Clear} - Press [Far] button or use joystick [ ▶ ] to return to previous menu (Back). [ALL]: Clear All saved items (CAM/PRESET/TOUR/PATTERN/SCAN) [CAM]: Clear Camera rel
Inhaltszusammenfassung zur Seite Nr. 18
Issue: 1.0 ▲/▼: move joystick up and down for selecting an item. ◀ / ▶ : move joystick left and right for moving an item. ▶ / [Open]/ [Near]: move joystick right to select or save settings or go to edit pages. ▶ / [Close]/ [Far]: move joystick to cancel or to exit current menu (Back). 3.4.1 Language - Select {Display Setup} and move to {Language} using joystick [ ▶ ]. - If you want to use another language, select one from English/Chinese/Russian/Spanish/German/Italian/Fr
Inhaltszusammenfassung zur Seite Nr. 19
Issue: 1.0 - Enter into {Main Menu} - Select {Display} and move to {Setup} using joystick [ ▶ ] - Use the joystick to move the label up, down, left, and/or right. - Press [Tele] button to edit the position of labels. - Move the joystick right [ ▶ ] to change the status of labels - Other labels can be set with same method. - Press [Far] button to return the previous menu (OSD setup). - Press [Open] button or use joystick to save the status. - Press [Close] button or use joystick t
Inhaltszusammenfassung zur Seite Nr. 20
Issue: 1.0 3.4.4 Image Setup This menu is for changing displayed image settings. - Enter into {Main Menu} - Select {Display} and move to {Image Setup} using joystick [ ▶ ]. - Using joystick [ ▶ ], Normal image, Horizontal image, Vertical image or H/V image can be selected. - Press [Open] button or use joystick to save settings. - Press [Close] button or use joystick to return to previous menu (Back). 3.4.5 MD (Motion Detection) The dome camera can monitor the m
