Inhaltszusammenfassung zur Seite Nr. 1
Electronic Multi-Zone Environmental Alarm System
Installation/Owner’s Manual
D-011-0152
Inhaltszusammenfassung zur Seite Nr. 2
Limitations of the Alarm System or Device While your alarm system or device is reliable and sophisticated, it does not offer guaranteed protection against burglary, fire or other emergency. Any security product, whether commercial or residential, is subject to compromise or failure-to-warn for a variety of reasons. These include: • Individuals may gain access through unprotected openings or have the technical sophistication to bypass an alarm sensor or disconnect an alarm warning device. • Mo
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents General Information............................................................................................................................... 1 Overview............................................................................................................................................ 1 How to Use This Manual.................................................................................................................... 2 Block Diagrams...........................
Inhaltszusammenfassung zur Seite Nr. 4
Operation.............................................................................................................................................. 49 Monitoring Environmental Conditions .............................................................................................. 49 Viewing Sensor Settings .................................................................................................................. 50 Viewing Active Alarms ...............................................
Inhaltszusammenfassung zur Seite Nr. 5
General Information Overview The EnviroAlert® EA800 Multi-Zone Environmental Alarm System monitors the environmental conditions detected by the sensors connected to the base unit, and provides alarm signals when monitored conditions at any of the sensors exceed the user-programmable HIGH LIMIT or LOW LIMIT set points. The alarm signals are provided via relay outputs that can operate with process controls, security systems, or other similar automated equipment. The EA800 Alarm System can be c
Inhaltszusammenfassung zur Seite Nr. 6
How to Use This Manual How to Use This Manual This manual is organized into sections that guide you through the installation process, then describe how to use the EA800 and change its programmed settings if necessary. Some troubleshooting guidelines are provided, and the appendices contain forms for you to photocopy and use to record the programmed settings of the EA800 and the monitoring system setup. The manual presents EA800 programming procedures by showing you the sequence of menus and s
Inhaltszusammenfassung zur Seite Nr. 7
General Information Block Diagrams Figure 2 shows a block diagram of the base unit interfaces and functions. The EA800 provides eight relays for indicating when a programmed alarm limit has been exceeded or a warning condition exists. An additional AUX (Auxiliary) Output relay provides an output signal to an optional audible alarm or strobe that is activated whenever an alarm condition exists. EA800 Base Unit Sensor 1 Relay 1 Output 1 Relay 1 coil control logic Sensor 2 Relay 2 coil control l
Inhaltszusammenfassung zur Seite Nr. 8
Symbols on the Product or Manual Labeling Symbols on the Product or Manual Labeling Symbols appearing on the product labeling, packaging, and/or in this manual are shown and described in Table 1. Table 1 Symbols on Product or Manual Symbol Definition Attention, consult accompanying documents or statements. For product disposal, ensure the following: • Do not dispose of this product as unsorted municipal waste. • Collect this product separately. • Use collection and return systems available t
Inhaltszusammenfassung zur Seite Nr. 9
General Information Monitoring Screens The EA800 user interface is menu-based. During normal system monitoring, one of the following three screens is displayed depending on the current state of the programmed sensors: The MONITORING (home) screen is displayed when there are no active alarms. The screen lists all programmed sensors connected to the base unit and their current reading or state. The MONITORING (home) screen displays pending alarms in reverse video as shown in the example at r
Inhaltszusammenfassung zur Seite Nr. 10
Keys Keys Figure 4 shows the base unit display and entry keys. The keys are described in Table 2. Figure 4 EA800 Base Unit Keys Table 2 Key Functions Key Function F1 This key's function changes as determined by the software. Its current function is displayed immediately above the key on the display. F2 This key's function changes as determined by the software. Its current function is displayed immediately above the key on the display. F3 This key's function changes as determined by the softw
Inhaltszusammenfassung zur Seite Nr. 11
General Information Base Unit Connections Figure 5 shows the EA800 base unit's connections and Table 3 describes the functions of each connection. Note: The base unit has four wired sensor inputs and four wireless RF sensor inputs. J5 J6 Aux Power Input 1 Input 2 Input 3 Input 4 Power In Out J13 J14 J2 Output 1 Output 2 Output 3 Output 4 Output 5 Output 6 Output 7 Output 8 Aux NO COM NC NO COM NC NO COM NC NO COM NC NO COM NC NO COM NC NO COM NC NO COM NC NO COM NC J8 J9 J10 F
Inhaltszusammenfassung zur Seite Nr. 12
Access Control and Passwords Table 3 EA800 Base Unit Connector Functions — continued Connector Designation Function J6 INPUT 1 Wired input for Relay 1 external temperature, water, 4-20mA, contact closure, or humidity sensor. INPUT 2 Wired input for Relay 2 external temperature, water, 4-20mA, contact closure, or humidity sensor. INPUT 3 Wired input for Relay 3 external temperature, water, 4-20mA, contact closure, or humidity sensor. INPUT 4 Wired input for Relay 4 external temperature, water,
Inhaltszusammenfassung zur Seite Nr. 13
General Information System Configuration Parameters The EA800 base unit requires certain system level information as outlined in Table 4. Table 4 System Configuration Parameters Parameter Selections Factory Default Description Date Format • MM/DD/YYYY MM/DD/YYYY Sets the desired date format for all event time stamps. • DD/MM/YYYY Time Format • 12-hour 24-hour Sets the desired time format for all event time stamps. • 24-hour Data Collec- • 30 seconds 5 minutes Sets the interval for collecting and
Inhaltszusammenfassung zur Seite Nr. 14
Sensors Sensors A variety of sensors may be used with the EA800 base unit to provide environmental status and information. These include the following: ■ Wired Sensors: Relays 1 through 4 are for use with sensors wired to the base unit. Wired sensors can be any of the following types: • Low temperature sensors - Blue Thermistor Probes • High temperature sensors - Red Thermistor Probes • Ultra Low temperature sensors - White Thermistor Probes • HA-III+ humidity sensor • Water Bug sensor (superv
Inhaltszusammenfassung zur Seite Nr. 15
+ + General Information Humidity Sensors Table 6 lists the humidity sensors available for use with the EA800 Alarm System. Table 6 EA800 Compatible Humidity Sensors Sensor Part Number Description Operating Range/Parameters HA-III+ PN M-001-0091 Humidity monitoring module 5% to 95% rh (non-condensing) Wireless PN M-001-0126 Wireless humidity monitoring 5% to 95% rh Humidity module (non-condensing) 4-20mA Sensors Theory of Operation Industry standard 4-20mA sensors can be used with the EA800. Ho
Inhaltszusammenfassung zur Seite Nr. 16
Sensors Power Supply / Sensor Voltage Selection In order to determine the power supply voltage necessary to ensure correct full-scale operation, it is necessary to identify all voltage drops within the current loop. Figures 6 and 7 show an EA800 drop of 4.0 VDC. This value accounts for the voltage drop generated by connecting the 4-20mA sensor to the EA800 using 1000 feet of 22 AWG wire. Now it is only necessary to identify the operating voltage range of the 4-20mA sensor, more importantly th
Inhaltszusammenfassung zur Seite Nr. 17
General Information Water Sensors Table 8 lists the water sensors available for use with the EA800 Alarm System. Use of water sensors requires that at least one supervised water sensor be used. Up to five additional unsupervised water sensors may be added in parallel on the same input where the supervised water sensor is configured. Table 8 EA800 Compatible Water Sensors Operating Sensor Part Number Description Range/Parameters 1 Water Bug PN M-001-0094 Supervised water sensor NA 1 Water se
Inhaltszusammenfassung zur Seite Nr. 18
Sensors Sensor Parameter Descriptions This section provides a description of each sensor parameter. Table 11 Sensor Parameter Descriptions Parameter Applicable to Sensors Description Sensor Name All A name used to identify the sensor in the alarm system. Select a name readily identified by the viewer. The sensor name is displayed on the Main screen during a no-alarm condition and on the Alarm screen during an alarm condition. Two name choice types are available: • Common Name: These are prepr
Inhaltszusammenfassung zur Seite Nr. 19
General Information Table 11 Sensor Parameter Descriptions — continued Parameter Applicable to Sensors Description High Alarm • Blue, Red and White The High Alarm Limit sets the value that trips the high alarm when Limit temperature sensors exceeded. • HA-III+ • 4-20mA sensor • Wireless humidity sensor •Wireless temperature sensor Alarm Delay All This sets the time period that an alarm condition can exist before the Time alarm is triggered. This is useful for helping to prevent false alarms
Inhaltszusammenfassung zur Seite Nr. 20
Relay Operation 16 D-011-0152
