Bedienungsanleitung Chamberlain RWA310R

Inhaltszusammenfassung zur Seite Nr. 1

®
Model RWA310R
Wireless Pedestrian & Vehicle Alert
Overview Base Station Switches:
Switch #1:
The Alert uses a Passive Infra-Red sensor to detect
OFF Buzzer Off
movement of people and vehicles, while allowing
ON Buzzer On (Default)
small animals to pass through undetected.
OFF
Switch #2:
1 2
Carton Inventory ON
OFF Long Buzz
ON Short Buzz (Default)
Programming Additional PIR Motion Sensors: The
Base Station can learn the code of up to 3 additional
Swivel Bushing
PIR Motion Sensors, respond

Inhaltszusammenfassung zur Seite Nr. 2

Switch Settings Programming PIR Motion Sensor to Base Station Antenna PIR Sensor Switch #1 Step 5 Test Switch #2 Button Switch #1:. OFF 6 m Detection Range ON 12 m Detection Range (Default) OFF Switch #2: OPTIONAL OFF Low Sensitivity 1 2 ON A ON High Sensitivity (Default) Plug in Base Station. Adhere Step 3 rubber pads to bottom. A 9-Volt battery (not provided) is optional in case of power failures. B Step 6 Insert battery pack facing away from circuit board and attach cover. A Ensu

Inhaltszusammenfassung zur Seite Nr. 3

PIR Motion Sensor Installation Troubleshooting The PIR Motion Sensor lights up, but the Base Step 7 Station does not respond. The PIR Motion Sensor must be programmed to Base Station (See Step 6). Ensure Base Station is on and is not muted. If the green power light is not lit or is flashing, press the Mute Button on the top of the Base Station to wake it up. If the green power is illuminated, look at the two small white Base Station switches next to the Learn Button. The #1 Dip Switch sho

Inhaltszusammenfassung zur Seite Nr. 4

© 2008, The Chamberlain Group Inc. 114A3673 All Rights Reserved