Inhaltszusammenfassung zur Seite Nr. 1
SiPass standalone
ACS3110
User manual
Fire Safety & Security Products
Siemens Building Technologies
Inhaltszusammenfassung zur Seite Nr. 2
Liefermöglichkeiten und technische Änderungen vorbehalten. Data and design subject to change without notice. / Supply subject to availability. © 2005 Copyright by Siemens Building Technologies AG Wir behalten uns alle Rechte an diesem Dokument und an dem in ihm dargestellten Gegenstand vor. Der Empfänger anerkennt diese Rechte und wird dieses Dokument nicht ohne unsere vorgängige schriftliche Ermächtigung ganz oder teilweise Dritten zugänglich machen oder außerhalb des Zweckes verwenden,
Inhaltszusammenfassung zur Seite Nr. 3
1 Basic information....................................................................................5 2 Access modes.........................................................................................5 2.1 Tag types ..................................................................................................5 3 Badge type...............................................................................................6 3.1 User badge...............................................
Inhaltszusammenfassung zur Seite Nr. 4
Inhaltszusammenfassung zur Seite Nr. 5
Basic information 1 Basic information SiPass standalone is a complete access control system for one door and up to 500 cardholders. SiPass standalone uses 125 kHz proximity technology. For gaining access, it is sufficient to hold the badge close to the reader. For programming purposes, an optional Remote Programmer can be used, which is simply held close to the reader the same way as a user badge. No wiring con- nection is required. 2 Access modes SiPass standalone can operate in 2 m
Inhaltszusammenfassung zur Seite Nr. 6
Badge type 3 Badge type 3.1 User badge User Can be used in ”Access” mode only. Special Can be used in both, ”Access” and ”Night lock” mode. 3.2 Master badge Program Master Master of masters Add Master Allows to introduce new badges to the systems memory Void Master Allows to delete (void) badges from the systems memory Night lock master Switches the system from access mode to night lock mode and back. 6 Siemens Building Technologies Fire Safety & Secu
Inhaltszusammenfassung zur Seite Nr. 7
LED indicators 4 LED indicators Read indication (yellow) Open (green) Closed (red) Night lock (red) Add (red) Void (red) Program (red) Fig. 1 LED indicators 5 Overall time-out In Program Mode, after 30 seconds of inactivity, an error tone sounds, and normal operation resumes. 7 Siemens Building Technologies Fire Safety & Security Products 02.2005
Inhaltszusammenfassung zur Seite Nr. 8
Security measures 6 Security measures 6.1 Missing tag For safety precautions the user is strongly advised to keep records of the ID num- bers and functions of all badges and the names of their users. In case of loss, the specific badges can be voided from memory by entering the badge number on the SiPass standalone Remote Programmer. See Appendix. 6.2 Anti tamper A tamper alarm is triggered if the unit is ripped off the wall. 6.3 Anti vandal Thanks to the proximity reading princi
Inhaltszusammenfassung zur Seite Nr. 9
Wake up: Declaring the Program Master 7 Wake up: Declaring the Program Master When powering up a SiPass standalone for the first time, one selected badge must be presented, to be declared as the Program Master. The Program Master may be regarded as a kind of master of masters; it will be instrumental in enabling all other masters and badges. Uninitialized Initialized New Program (access mode) (user level Master Read Read Read Open Open Open Closed Closed Closed Night lock Nig
Inhaltszusammenfassung zur Seite Nr. 10
Declaring the masters 8 Declaring the masters SiPass standalone has 3 programming modes which need to be processed before normal operation. When going through these modes the first time, you can directly declare the re- spective masters. Resume Enter Declare Declare Declare normal Void Add Night Lock Program operation Master Master Mode Master Read Read Read Read Read Open Open Open Open Open Closed Closed Closed Closed Closed Night lock Night lock Night lock Night lo
Inhaltszusammenfassung zur Seite Nr. 11
Change Program Master 9 Change Program Master This procedure replaces the old Program Master by a new one. The old Program Master is thereby voided from the SiPass standalone memory and the new badge is declared as Program Master instead. This is helpful if e.g. an other Program Master than the normal one was added to the memory during wake-up. Present the new Program Master a further 5 times to step through the remaining steps, back to Normal mode. Declare new Void old Enter No
Inhaltszusammenfassung zur Seite Nr. 12
Add new user badge 10 Add new user badge Badges which shall be granted access must first be stored in the SiPass stand- alone memory. The Add Master allows new badges to be added which, from then on, will be granted access. Any badge can be added, except Master badges and badges which are already in memory. Normal Quit Add Mode, Enter Add new operation enter normal Add Mode user badges, operation one by one Read Read Read Read Open Open Open Open Closed Closed Closed Clo
Inhaltszusammenfassung zur Seite Nr. 13
Void user badge 11 Void user badge Badges which shall be denied access must first be voided from the SiPass stand- alone memory. The Void Master allows badges to be voided which, from then on, will be denied access. Enter Normal Void Quit Void Mode, Void Mode operation user badges, enter normal one by one operation Read Read Read Read Open Open Open Open Closed Closed Closed Closed Night lock Night lock Night lock Night lock Add Add Add Add Void Void Void Void Program P
Inhaltszusammenfassung zur Seite Nr. 14
Set Night Lock Mode 12 Set Night Lock Mode In night lock mode, normal badges will not be granted access. Only Special User Badges are granted access in this mode. Night Lock Mode is switched on with the Night Lock Master Normal Night Lock Mode operation Read Read Open Open Closed Closed Night lock Night lock Add Add Void Void Program Program Night Lock Master Fig. 7 Set night lock In case of power failure, SiPass standalone will memorize the current status of the Night Lo
Inhaltszusammenfassung zur Seite Nr. 15
Unset Night Lock Mode 13 Unset Night Lock Mode Only the Night Lock Master can switch Night Lock off. When presenting the Night Lock Master to unset Night Lock, access is granted at the same time. This function is intended for persons who are authorized to enable access for oth- ers, for example to unlock an office building in the morning. Access Resume Unset Night Lock (function depends normal operation Night Lock Mode on settings) Read Read Read Read Open Open Open Open C
Inhaltszusammenfassung zur Seite Nr. 16
Add Special User Badge 14 Add Special User Badge Special User Badges are granted access both, during Night Lock and during Nor- mal Operation. Unlike the Night Lock Master, they have no effect on Night Lock status. Special User Badges must be added by using the Add Master while SiPass stand- alone is in Night Lock mode. Enter Add new Quit Add Mode, Night Lock Special User resume Mode Add Mode Badges Night Lock Mode Read Read Read Read Open Open Open Open Closed Closed Clo
Inhaltszusammenfassung zur Seite Nr. 17
Declare Remote Programmer 15 Declare Remote Programmer To store a Remote Programmer in the SiPass standalone memory, first show the Program Master to enter Program mode, then present the Remote Programmer while in Program mode. After this, SiPass standalone will resume its normal opera- tion. Normal Enter Resume Add Remote operation Program Mode normal Programmer operation Read Read Read Read Open Open Open Open Closed Closed Closed Closed Night lock Night lock Night lock N
Inhaltszusammenfassung zur Seite Nr. 18
Void badge with a Remote Programmer 16 Void badge with a Remote Programmer Using a Remote Programmer, badges or Remote Programmers can be voided by their number. This is useful if badges or Remote Programmers are lost, stolen or damaged beyond use. For this reason it is important to keep records of all added badges, Masters and Remote Programmers. Quit Enter badge number, Enter Void Mode Program Mode Void repeat for each old Void Mode badge Mode n n n n n n n 9 * * * Read R
Inhaltszusammenfassung zur Seite Nr. 19
Appendix 17 Appendix 17.1 Tag registration list ID Number Date Masters Program Master Void Master Add Master Nightlock Master Remote Programmers Users 19 Siemens Building Technologies Fire Safety & Security Products 02.2005
Inhaltszusammenfassung zur Seite Nr. 20
© 2005 Copyright by Issued by Siemens Building Technologies AG Siemens Building Technologies Data and design subject to change without notice. Fire & Security Products GmbH & Co. oHG Supply subject to availability. D-76181 Karlsruhe Printed in the Federal Republic of Germany on environment-friendly chlorine-free paper. www.sbt.siemens.com Document no. A24205-A335-B241 Edition 02.2005
