Bedienungsanleitung Sony BRCSDP12

Inhaltszusammenfassung zur Seite Nr. 1

Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
www.sony.com/security
Outdoor and Indoor Dome Housings
Installation and Operation Instructions for the following models:
BRCSDP12
(1) Housing
(1) Supplied Parts
(1) Power connector (Heather/blower)
(1) Toolhead driver
(1) Operation Instruction Manual

Inhaltszusammenfassung zur Seite Nr. 2

ELECTRICAL SPECIFICATIONS INSTALLING QUICK RELEASE BRACKET AND PAN/TILT CAMERA ASSEMBLY (ALL MODELS) Heater and Blower Only 1 Using the security tool provided, open the housing by loosen- Power 24 VAC, Class 2 Only ! ing the (3) captive security screws located on the housing ring next to the lower clear dome (Figure 2). For BRCSDP12 53 watts at 24 VAC (heater and blower) Input Connectors: BNC (2) screw-down connectors RJ-4

Inhaltszusammenfassung zur Seite Nr. 3

INSTALLING THE CAMERA WIRING 1 Install the Sony BRC300 pan/tilt onto the quick release CHART A WIRING COLOR CODE bracket using the (4) screws provided with the camera POWER AND CONTROL INPUTS (Figure 4). POWER 1 Camera Power (12 VDC) Red 2 Camera Power (12 VDC) Orange 3 Heater & Blower Power (24 VAC) Yellow 4 Heater & Blower Power (24 VAC) Green NOTE: Failure to provide power to heater and blower will

Inhaltszusammenfassung zur Seite Nr. 4

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS 1 Read Instructions - All the safety and operating instructions should be read before the unit is operated. CAUTION 2 Retain Instructions - The safety and operating instructions RISK OF ELECTRIC SHOCK ! DO NOT OPEN should be retained for future reference. 3 Heed Warnings - All warnings on the unit and in the operat- CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, ing instructions should be adhered to. DO