Inhaltszusammenfassung zur Seite Nr. 1
HMEC 26
Instruction manual
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Safety instructions Please read these instructions carefully and completely before using the headset. Make these instructions easily accessible to all users at all times. Always include these instructions when passing the headset on to third parties. During flight operation, do not use the headset for telephone calls. With the NoiseGard™ active noise compensation switched on, typical aircraft sounds (for example, those from engines, propellers, warning alarms, etc.) may sound different to y
Inhaltszusammenfassung zur Seite Nr. 4
Only replace those parts of the headset whose replacement is described in this manual. All other parts of the headset must be replaced by your Sennheiser agent. Protect the headset from humidity. Use only a slightly damp cloth to clean the headset. For information on how to clean the headset, contact your Sennheiser agent. Intended use of the headset Intended use includes: • having read this instruction manual especially the chapter “Safety instructions”. • using the headset in jet aircraft an
Inhaltszusammenfassung zur Seite Nr. 5
The HMEC 26 headset The HMEC 26 headset with NoiseGard™ active noise compensation features dynamic, closed headphones. The noise-compensating condenser microphone ensures excellent speech transmission even in noisy environments. Designed for use in aircraft cockpits. Features NoiseGard™ active noise compensation reduces ambient noise by up to 18 dB – consequently the radio volume can be decreased Lightweight Extremely comfortable to wear due to the patented two-piece automatic headband and so
Inhaltszusammenfassung zur Seite Nr. 6
ETSO approval C57a/C58a Delivery includes 1 HMEC 26 headset 1 cable clip 1 wind and pop screen 1 instruction manual 1 carry bag 1 EASA Form 1 Operation Turning the microphone boom The microphone boom can be rotated. This allows the headset to be worn with the microphone boom positioned on either the left or right-hand side of the head. 4
Inhaltszusammenfassung zur Seite Nr. 7
Putting on the headset When putting on the headset, the patented two-piece headband adjusts automatically. Positioning the microphone Bend the flexible microphone boom so that the micro- phone is placed at the corner of the mouth. Maintain a distance of approx. 2 cm between microphone and mouth. Always use the supplied wind and pop screen. 5
Inhaltszusammenfassung zur Seite Nr. 8
Flipping away one earcup The headset features a “flip-away” earcup for single- sided listening. Adjusting the volume directly on the audio system Connect the headset to the corresponding sockets of your audio system. Adjust the volume directly on the audio system. CAUTION! Hearing damage due to high volumes! This headset is capable of producing high sound pressure levels. Higher volumes or longer durations can damage your hearing! Set the volume to a medium level. Make sure that you can hear cr
Inhaltszusammenfassung zur Seite Nr. 9
Adjusting the microphone sensitivity The microphone sensitivity has been factory pre-set to 80mV/Pa as per RTCA DO-214. You can change the microphone sensitivity by turning a small screwdriver in the direction of the arrow. + – 7
Inhaltszusammenfassung zur Seite Nr. 10
The operating controls of the HMEC 26 Operating control I Volume controls LED NoiseGard™ ON/OFF switch Mono/stereo switch BOOM switch L/R 3.5 mm jack socket Battery compartment 2.5 mm jack socket Headset with Operating element operating control I HMEC 26-BV-K xx xxx xxx HMEC 26-BV-KP x x xxx xxx HMEC 26-BV-CP x x x x x HMEC 26-B-K x x x HMEC 26-B-CP x x x HMEC 26-V-KP xx xxx HMEC 26-V-RP xx xxx HMEC 26-V-CP x x x x HMEC 26-V-KX xx xxx
Inhaltszusammenfassung zur Seite Nr. 11
Operating control II LED NoiseGard™ ON/OFF switch Headset with Operating element operating control II HMEC 26-CP x x HMEC 26-KP x x HMEC 26-NP x x 9
Inhaltszusammenfassung zur Seite Nr. 12
Using the headset Switching NoiseGard™ on/off The NoiseGard™ ON/OFF switch allows you to switch the NoiseGard™ active noise compensation on or off. With NoiseGard™ switched off, the headset can be used as a conventional headset. Set the NoiseGard™ ON/OFF switch to the desired position: ON: NoiseGard™ is switched on. The LED lights up, indicating the battery charge status (see page11) or power supply via the aircraft DC power supply system. OFF: NoiseGard™ is switched off. The LED is o
Inhaltszusammenfassung zur Seite Nr. 13
Switching between mono and stereo mode The mono/stereo switch allows you to switch between mono ( ) and stereo( ) mode, depending on the audio system. Set the mono/stereo switch to the desired position: mono ( ) or stereo ( ). Changing the left and right stereo channel The position “R” or “L” of the BOOM switch corresponds to the position of the microphone on the left or right side of the mouth. When the microphone boom is rotated to permit left or right side microphone orientation,
Inhaltszusammenfassung zur Seite Nr. 14
The operating time with batteries/rechargeable batteries is approx. 60 hours. With NoiseGard™ switched on (see page 10), the LED provides information on the remaining battery/ rechargeable battery capacity. LED lights up yellow: The battery capacity is sufficient. LED lights up red: The batteries are flat. Replace the batteries. Activating the “auto shut-off” function The battery-saving “auto shut-off” function automatical- ly switches the NoiseGard™ electronics off when the headset is
Inhaltszusammenfassung zur Seite Nr. 15
Switching the TalkThrough function on/off (HMEC 26-T only) The headset provides excellent attenuation of ambient noise. In order to allow you to communicate undisturbed with your surroundings while wearing the headset, the HMEC 26-T features a TalkThrough function. Press the TalkThrough button to switch the TalkThrough function on. The LED lights up. Press the TalkThrough button again to switch TalkThrough off. Note: The TalkThrough function can only be used when the NoiseGard™ active noi
Inhaltszusammenfassung zur Seite Nr. 16
Connecting a mobile telephone The 2.5 mm jack socket allows you to connect a mobile telephone. For this purpose, the NoiseGard™ active noise compensation must be switched on and the microphone connector must be connected to the aircraft radio/audio. A suitable adapter for your mobile telephone with 2.5 mm jack socket is available from your Sennheiser agent. Danger of accident due to reduced attention! CAUTION! Making telephone calls or operating the mobile telephone limits your attention and m
Inhaltszusammenfassung zur Seite Nr. 17
Connecting an additional audio player The 3.5 mm jack socket allows you to connect and listen to an audio player (not supplied) through the headset. For this purpose, the NoiseGard™ active noise compensation must be switched on. Danger of accident due to reduced attention! CAUTION! Listening to music or operating an audio device limits your attention and may cause accidents. During flight operation, do not use the headset for listening to additional audio sources! Hearing damage due to high v
Inhaltszusammenfassung zur Seite Nr. 18
Care and maintenance Cleaning the headset Use a soft, slightly damp cloth to clean the headset from time to time. If the headset is very dirty, use a cloth dampened with mild, soapy water. Do not use any solvents or cleansing agents. Danger of short-circuit due to the ingress of CAUTION! water! Water entering the housing of the headset can cause a short-circuit and damage the electronics. Replacing the earpads For reasons of hygiene, the earpads should be replaced from time to time. Grasp the
Inhaltszusammenfassung zur Seite Nr. 19
Accessories and spare parts By changing the cables, you can simply retrofit different operating controls (see page 8 and 9) or connectors (see page 19) to your headset. Cable -CP Cat. No. 500852 Cable -V-CP Cat. No. 500846 Cable -B-CP Cat. No. 500837 Cable -BV-CP Cat. No. 500838 Cable -KP Cat. No. 500842 Cable -V-KP Cat. No. 500848 Cable -B-K Cat. No. 502183 Cable -BV-K Cat. No. 500839 Cable -BV-KP Cat. No. 504030 Cable -NP Cat. No. 500855 Cable -V-RP Cat. No. 500853 Cable -V-KX Cat.
Inhaltszusammenfassung zur Seite Nr. 20
Cable clip MZQ 2002 Cat. No. 044740 Cable clip HZC 08 Cat. No. 525787 Cable clips HZC 08 MZQ 2002 (for round cable only) (for round or flat cable) 18
