Inhaltszusammenfassung zur Seite Nr. 1
®
Savi Office WO201
Wireless Headset System
™
with Optional HL10 Lifter
User Guide
Inhaltszusammenfassung zur Seite Nr. 2
Welcome Congratulations on purchasing your new Plantronics product. This guide contains instructions for setting up and using your Savi Office WO201 (WO1 Base and WH200/WH210 Headset) Wireless Headset System. Please refer to the separate safety instructions for important product safety information prior to installation or use of the product. Refer to the CD for Animated Set Up instructions. Plantronics Savi User Guide
Inhaltszusammenfassung zur Seite Nr. 3
Contents 1 Package Contents and Features ...........................4 Conferencing In Up to Three Additional Headsets ...... 15 1.1 Savi Base ................................................................. 4 Setting Default Line to Desk Phone or PC ................... 16 1.2 Savi Headset ............................................................ 5 Toggling On/Off Over-the-Air Subscription .................. 16 Setting the Range ........................................................ 16 1.
Inhaltszusammenfassung zur Seite Nr. 4
1 Package Contents and Features 1.1 Savi WO1 Base CD includes: • Plantronics Software • Animated Setup Guide • Complete User Guide Base Power Supply Telephone Interface Cable Base USB Cable Savi WO1 Base Features Desk Phone Talk Button PC Talk Button Indicator Light Indicator Light Desk Phone Speaking Volume USB Port Configuration Desk Phone Subscription Charging Switch Listening Button and Indicator Telephone Interface Volume Indicator Light Power Cable Jack Light Jack Handset Li
Inhaltszusammenfassung zur Seite Nr. 5
1.2 Savi WH200/WH210 Headset Headset with Pre-Installed Eartip Charge Cradle Eartips Savi WH200/WH210 Headset Features Volume Up Button (also controls switching functions) Volume Down Button (also Call Control Button controls mute) Indicator Light Microphone Plantronics Savi User Guide 5
Inhaltszusammenfassung zur Seite Nr. 6
1.3 HL10 Lifter (Optional) Handset Lifter Arm Ringer Microphone Jack (remove cover) Power Cord Height Switch Accessory Jack HL10 Lifter Additional HL10 Lifter Parts (If Required) Ringer Microphone Extender For Nortel i2004 Arm phones only Plantronics Savi User Guide 6
Inhaltszusammenfassung zur Seite Nr. 7
2 Base Set Up 2.1 Attaching Charge Cradle to Base 2.3 Connecting Power Supply to Base 1 Connect the headset charge cradle to the base. Push 1 Connect the base power supply into the power jack on firmly on the cradle until the cradle snaps in to place. the base. 2 Connect the power supply to outlet. 2.2 Connecting Base to Desk Phone 1 Connect the telephone interface cable to the telephone interface cable jack on the base. 2.4 Positioning Base 2 Disconnect the handset coil cord from the desk
Inhaltszusammenfassung zur Seite Nr. 8
3 Headset Set Up 5 the headset can be converted for wearing on left ear as 3.1 Fitting Headset follows: The headset comes with a pre-installed eartip. To install a different a. Rotate the microphone boom up. eartip see the following: 1 Remove the pre-installed eartip by pushing in and turning the eartip CLOCKwise, then pull firmly. b. t urn microphone boom around. 2 Choose the size and style of eartip that fits most comfortably. Align eartip tabs with notches in headset. Push in firmly
Inhaltszusammenfassung zur Seite Nr. 9
4 Configure and t est Call 7 If the dial tone still does not sound clear, adjust the 4.1 Checking Configuration Configuration Switch until the dial tone sounds the best. 1 If your desk phone has a volume control set it to mid- NOte Multiple settings might work with your phone; however, range. only one is the optimal position. 2 On the base, ensure the Configuration Switch is set to 8 Press the call control button on the headset to complete “A” and the Desk Phone Speaking Volume and Desk c
Inhaltszusammenfassung zur Seite Nr. 10
5 Lifter Set Up (Optional) 7 Gently place the lifter on the desk phone in the pre- 5.1 Installing Lifter determined position. 8 Press firmly to adhere. Handset Lifter Power Cord 1 Firmly press the handset lifter power cord into the handset lifter jack. 2 While wearing your headset, slide the handset lifter arm 5.2 If You Do Not Hear a Dial t one under the handset until the lifter base touches the side of the phone. 1 If you do not hear a dial tone, raise the lifter height switch to the n
Inhaltszusammenfassung zur Seite Nr. 11
1 2 Ringer Microphone 5.3 Additional Parts (If Required) extender Arm Stabilizers Use ringer microphone when the telephone speaker is not located directly under the handset. 1 Remove cover from ringer microphone jack on back of lifter. 2 Connect ringer microphone plug. Use extender arm when the handset lifter needs additional 3 Place ringer microphone over phone speaker. Remove stability lifting and returning handset to cradle. adhesive tape and attach. 1 Slide extender arm onto lifter. 2
Inhaltszusammenfassung zur Seite Nr. 12
6 PC Set Up 7 t o end the test call, press the call control button on the 6.1 Installing USB Cable headset. For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and hearing visit: plantronics.com/healthandsafety. * Consult Microsoft Office Communicator Help for more information for 6.3 Installing Plantronics Software Incremental Value (optional) 1 In th
Inhaltszusammenfassung zur Seite Nr. 13
7 Using Your Savi Office Wireless Headset System IMPORt ANt It is highly recommended that you install the Plantronics software. Though your Savi Office system will operate without the software it will limit the system’s full capabilities. Call Control Button Powering Up Headset If the headset battery is charged the headset is automatically on. The headset does not have an on/off button. Indicator Light Placing, Answering, and ending Calls with Desk Phone Phones with Handset Lifter or Electr
Inhaltszusammenfassung zur Seite Nr. 14
Placing, Answering, and ending Calls - Other Softphones With Plantronics Software* Without Plantronics Software To place a call 1. Dial number from the supported 1. Short press call control button on headset** or softphone application short press base PC talk button 2. Dial number from softphone application To answer a call 1. Short press call control button on headset or 1. Short press call control button on headset** or short press base PC talk button short press base PC
Inhaltszusammenfassung zur Seite Nr. 15
Muting the Headset Conferencing In Up to three Additional Headsets You can mute/unmute the headset the following ways: While on a call you can subscribe up to three additional headsets Headset Base to your base for conferencing. As you add headsets to the base an additional headset icon will appear in the Plantronics software Press the volume down button (at Short press (less than one screen with a number from 1 to 3 indicating the number of least 1½ seconds) until the base second) of a
Inhaltszusammenfassung zur Seite Nr. 16
Setting Default Line to Desk Phone or PC Subscription Button Indicator Light The Savi Office system ships with the desk phone as the default Master headset subscribed to base Solid green outbound line. This means any call initiated from the headset with the call control button will open desk phone audio. You can Base in master subscribing mode Flashes red and green change your default outbound line from the base talk buttons. While the system is in idle mode, press and hold the PC talk Base
Inhaltszusammenfassung zur Seite Nr. 17
t alk time Headset Indicator Light The Savi Office system will provide up to 6 hours of talk time. Talk Headset Status Headset Indicator Light time will be reduced when operating in wideband mode and/or if the headset is used consistently at a far distance from the base. Headset charging Off Checking Headset Battery Level Headset fully charged Off When the system is idle, short press the Base subscribe button Headset in-use Flashes green once to get feedback on the headset battery level. Sub
Inhaltszusammenfassung zur Seite Nr. 18
8 Plantronics Software Platform Softphone Support Plantronics Update Manager Download Plantronics software for remote call answer/end with All required software for Savi Office system can be remotely supported softphones at plantronics.com/software. updated when updates are available. Start Plantronics Update Manager from Windows Start Programs menu to change settings Remote call answer/end from the Savi headset is available for all such as automatic or manual check for updates. softphones w
Inhaltszusammenfassung zur Seite Nr. 19
Plantronics Control Panel User preferences and various device settings can be changed using the Plantronics Control Panel. To start this program, click Start>Programs>Plantronics then open Plantronics Control Panel. Battery Life At the lower left corner of the screen (and for all software screens), you will see one of the following icons indicating the approximate charge left in the headset battery. 100% 75% 50% 25% 0% Devices t ab To configure your settings, select Savi Office from the pull
Inhaltszusammenfassung zur Seite Nr. 20
Device Settings – Headset Feature Settings Default General Mute Tone Standard/Low/Off Standard Deskphone Ringtone Sound 1/Sound 2/Sound 3 Sound 1 Deskphone Volume Standard/Low/Off Standard PC Ringtone Sound 1/Sound 2/Sound 3 Sound 2 PC Volume Standard/Low/Off Standard System Tones Standard/Low/Off Standard Second Inbound Call Ring Continuously/Ring Once/Ignore Ring Continuously Device Settings – Advanced Feature Settings Default Audio Protection Audio Limiting 80 dB/85 dB/off Off Hours on phone
