Inhaltszusammenfassung zur Seite Nr. 1
Limited Warranty
• This warranty covers defects in materials and workmanship of products manufactured,
sold or certified by Plantronics which were purchased and used in the United States.
• This warranty lasts for one year from the date of purchase of the products.
• This warranty extends to you only if you are the end user with the original purchase
receipt.
• We will, at our option, repair or replace the products that do not conform to the
warranty. We may use functionally equivalent recondit
Inhaltszusammenfassung zur Seite Nr. 2
E L B A T O F CONTENTS PACKAGE CONTENTS Headset Package Contents 3 Features 4 Setup 6 Setup – Handset Lifter (Optional) 8 Eartips Charging 9 Positioning 9 Adjusting Fit 10 Spare Voice Tube Multi-shift Pairing 11 Base Making/Answering/Ending Calls 12 Checking Compatibility 14 Volume 15 Headset Controls 17 Base Indicator Lights 18 AC Charger Voice Tube Replacement 18 Troubleshooting 19 Subscription 21 System Reset 21 Telephone Cord Battery Replacement 21 Additional Parts (if required) 22 Handset
Inhaltszusammenfassung zur Seite Nr. 3
TURES F E A TURES F E A Base - Top View Base - Bottom View Base - Top View Base - Bottom View Telephone Handset Telephone Handset Front: Front: Jack Jack Indicator Lights Indicator Lights Talking (Green) Handset Lifter Jack Talking (Green) Handset Lifter Jack Power (Red) Power (Red) Charging (Amber) Charging (Amber) AC Charging Jack AC Charging Jack Telephone Cord Jack Telephone Cord Jack Speaking Volume Speaking Volume Charging Cradle Major Adjust Charging Cradle Major Adjust Headset Headse
Inhaltszusammenfassung zur Seite Nr. 4
A SETUP SETUP Base - Bottom View 1 2 3A 4A Unplug the handset cord from phone. Plug the phone cord that is connected to the CS70 base into the handset jack on the phone. CAUTION: Your phone may have two similar jacks. Put the cord only in the jack from which the handset came. 4 3 Plug the handset cord into the Plug the AC charger into the handset jack in the base. base’s AC charging jack. Push in until it clicks. Push in firmly. Complete Plug the handset cord into the handset Plug the AC charge
Inhaltszusammenfassung zur Seite Nr. 5
12” 6” SETUP HANDSET LIFTER ( O p t i o n a l ) 1. Slide headset into charging cradle so that microphone boom is on the 1 2 right. 2. Gently press down on the headset to ensure that headset is in correct position. Amber charge indicator light on base will flash while charging and will change to solid amber when fully charged. • 20 minutes = minimum charge to continue setup • 3 hours = full charge 1. Plug handset lifter power cord into handset lifter jack on base. Push firmly into base. 2. Pos
Inhaltszusammenfassung zur Seite Nr. 6
OR OR OR JUSTINGD A F I T TI-SHIFT PAIRING L U M 1 2 3 1 2 Enable Disable 1. Slide the headset over and behind your ear. 1. To pair another headset to the same base, you must first enable the multi-shift pairing feature. Long press (5 sec.) the speaking volume minor adjust up button on 2. Rotate and press gently towards your ear for a snug fit. back of base until the power indicator light flashes. 3. Rotate voice tube microphone until it is pointed towards your chin. 2. Place a charged headset
Inhaltszusammenfassung zur Seite Nr. 7
1 1 2 1 1 2 1 2 2 S L L A C S L L A C With Handset lifter (Optional) Without Handset lifter To first test proper set up of the handset lifter: 1. Press the call control button on headset to activate handset lifter and lift handset from phone. Dial tone should sound if the handset is raised high enough. To make a call: 2. If no dial tone, adjust handset lifter height switch or reposition lifter under handset. 1. Take your handset off-hook. Dial tone should sound through handset (if not, check If
Inhaltszusammenfassung zur Seite Nr. 8
4 4 1 Y T I L I B I T CHECKING COMPA LISTENING VOLUME NOTE: Be sure to set your telephone’s volume at the mid range before adjusting the NOTE: The compatibility setting of “1” is set at the factory to work with most phones. CS70 volume. However, if you do not hear a dial tone, if either you or the recipient is having trouble hearing, or if you experience buzzing/hissing, please follow the directions below. Minor Adjust Major Adjust Push on the “+” and “–” buttons t
Inhaltszusammenfassung zur Seite Nr. 9
H E A D S E T E M U L O V Minor Adjust Major Adjust Use the speaking volume major adjust Use the speaking volume minor adjust control on the bottom of the base for control on the back of the base for large incremental adjustments. minor incremental adjustments. Feature Action Tone A NOTE: You must be in talk mode (i.e. on a NOTE: A is the lowest setting. B is the most common setting. call) to adjust. D is the loudest setting. Listening volume Press + to increase Ascending/descending minor adj
Inhaltszusammenfassung zur Seite Nr. 10
T O R L I G H T S ASE INDICA B Problem Solution Problem Solution Indicator Lights Sound in handset is I plugged everything in but • Check that the AC charger jack is connected to the base unit. • Reduce speaking volume by changing the speaking volume Talking/Muted (Green) distorted/hear echo in major adjust switch setting. See page 16. the lights won’t come on. • Check that the AC charger is securely connected to a working handset. Power (Red) wall outlet. • Point microphone towards your chin
Inhaltszusammenfassung zur Seite Nr. 11
4 4 3 Problem Solution Problem Solution The headset and base unit are supplied subscribed to each other. However, if you wish to use a replacement headset with the base unit, then the units must be re-subscribed. To Sound in handset is I plugged everything in but • Check that the AC charger jack is connected to the base unit. • Reduce speaking volume by changing the speaking volume do so, please follow the instructions on page 11 for Multi-Shift Pairing. distorted/hear echo in the lights won’
Inhaltszusammenfassung zur Seite Nr. 12
1 1 2 1 2 2 Stabilizers Extender Arm Stabilizers Extender Arm Stabilizers This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits a
