Inhaltszusammenfassung zur Seite Nr. 1
B
A
WX-CT2020
TRANSCEIVER
MONITOR
WX-CC2010
Wireless Communication System
Center Module
Operating Instructions
Model No. WX-CC2010 Series
Digital Technology
POWER
VEHICLE
PRESENT
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
FRANÇAIS ENGLISH
Inhaltszusammenfassung zur Seite Nr. 2
ENGLISH VERSION FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarize
Inhaltszusammenfassung zur Seite Nr. 4
CONTENTS IMPORTANT SAFETY INSTRUCTIONS ...................................................................................................... 3 PREFACE..................................................................................................................................................... 5 PRECAUTIONS............................................................................................................................................ 6 PANASONIC WX-CC2010 SERIES SYSTEM PARTS AND
Inhaltszusammenfassung zur Seite Nr. 5
PREFACE Panasonic WX-CC2010 Center Module is designed for New Functions of the WX-CC2010 Panasonic Wireless Communication System, which is used (New Technological Features) with drive-through menu boards, etc. The system operates on UHF frequencies, and offers multi-channel flexibility •New DNR (Digital Noise Reduction) making use of the PLL (Phase Locked Loop) technology. The New DNR function provides sound quality without noise that accompanies digital processing. (WX- CC2010 Center Module has
Inhaltszusammenfassung zur Seite Nr. 6
PRECAUTIONS This center module is a sensitive device and should be 7. Replace a missing microphone cover and ear speaker regarded as such. If handled carelessly, the hazard of elec- cover of the headset with a new one to prevent distor- tric shock may exist. tion or loss of audio. In order to utilize the instrument to its fullest potential, 8. Repair or replace any defective components. please consider the following precautions. 9. Turn off the order taker unit when not in use, in order to 1. Ha
Inhaltszusammenfassung zur Seite Nr. 7
Condition Conditioning Condition B A Condition Charging Charging Conditioning Charging Charging Conditioning Conditioning Ready Full Condition Ready Full Ready Full Ready Full T I IT RANSCE VER MON OR WX-CC2010 PANASONIC WX-CC2010 SERIES SYSTEM PARTS AND ACCESSORIES Note: Illustrations may differ from actual products. ■ Center Module ■ All-in-One Headset ■ Order Taker Unit WX-CC2010 WX-CH2050A WX-CT2020 POWER VEHICLE PRESENT ■ Headset ■ Vehicle Detector 917-1 ■ Speaker Microphone WX-C1027A (Loca
Inhaltszusammenfassung zur Seite Nr. 8
TRANSCEIVER MONITOR WX-CC2010 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ■ WX-CC2010 Center Module VEHICLE DETECTOR POWER CIRCUT AUX IN OFF ON CHANNEL A B PROTECTOR TALK OFF ON CONTINUES OFF ON REMOTE NORMAL ON PAGE OFF ON USA/CANADA USA CND OVERRIDE ON BEEP OFF ON OFF ON T/B TBC1 OFF LEVEL TBC2 OFF ON OFF CH SELECT AUX IN SEL LINE G/MIC DNR1 OFF ON 1 DNR 8 2 DNR2 OFF ON EFFECT 7 3 CAUTION USE WITH SPECIFIED 6 4 TALK MONITOR OFF ON DNR3 OFF ON 5 EQUIPMENT SEE ITS MANUAL BEFORE CONNECTING ULTRA
Inhaltszusammenfassung zur Seite Nr. 9
Notes: USA/Canada Switch (USA/CANADA, USA/CND) • The following switches and terminals should be used To select a radio frequency suitable for the region, set by qualified service personnel or system installers this switch as follows. only. • To change the setting of the following switches, turn USA: This setting is available in the United States. off the power of the center module, then turn it back CND: This setting is available in Canada. on. Talkback Level Control Switch (T/B LEVEL: TBC1, q A
Inhaltszusammenfassung zur Seite Nr. 10
w Vehicle Detector Normal/Override On/Off Switches u Power Indicator (POWER) (Green) (VEHICLE DETECTOR, NORMAL/OVERRIDE This indicates that the power of center module is on. ON/OFF) NORMAL: The vehicle detector turns on only when a i Vehicle Detector Indicator (VEHICLE PRESENT) vehicle is detected at the menu board. When the (Amber) detector is turned on, a beep tone is heard in the This indicates that a vehicle has been detected. headset. After the beep tone, the menuboard speaker turns on to
Inhaltszusammenfassung zur Seite Nr. 11
!4 Day/Night Selection Switch (DAY/NIGHT) !8 Remote Speaker Terminals In the Day mode, you will not hear the beep tone of the (REMOTE SPEAKER: H, GND) other lane in the headset that sounds when the vehicle These terminals are used for the connection with detector is on and that sounds when you press the but- Remote Speaker. ton T of the order taker unit. The audio level is 8 Ω , 3 W, unbalanced. Note: The remote speaker is a locally procured acces- In the Night mode, you will hear the beep tone
Inhaltszusammenfassung zur Seite Nr. 12
TRANSCEIVER MONITOR WX-CC2010 ■ WX-C516 Power Transformer ■ WX-C550 Speaker Microphone $1 $0 #3 #4 #5 #3 Mounting Hole This hole is used for mounting the power transformer #6 Input Cord onto the wall plates. A pigtail cord is provided for the speaker input. Its length is approx. 3 meters. #4 Power Plug To prevent fire or electrical shock, connect this directly #7 Mounting Bracket to a 3-plug grounded receptacle of 120 V AC, 60Hz. AU-type mounting bracket with screw holes is provid- ed as a sta
Inhaltszusammenfassung zur Seite Nr. 13
OPERATING PROCEDURES Refer to WX-CT2020/WX-CH2050A Operating Instructions for details. COMPATIBILITY WX-CC2010 and WX-C1020 When PAGE is pressed during the TALK LOCK function is activated, the TALK LOCK function is canceled and PAGE sound comes out of the menu board. TROUBLESHOOTING Problem Check item The communication between the order taker units and menu • Is the POWER switch on the center module turned on? board cannot be established. (The TRANSCEIVER MONITOR (Refer to p. 10.) indicator is n
Inhaltszusammenfassung zur Seite Nr. 14
SPECIFICATIONS WX-CC2010 Center Module Operating Frequency: Transmit; 468.6125 MHz - 469.3875 MHz Receive; 463.6125 MHz - 464.3875 MHz Type of Emission: F3 Type of Antenna: 1/4 wavelength whip antenna Power Supply: 12 V AC, 60 Hz (Using WX-C516 Power Transformer) Power Consumption: 10 W Menuboard Speaker A and B Output: 3 W, 8 Ω Remote Speaker A and B Output: 3 W, 8 Ω Vehicle Detector Input: Normally Open (close contact requires vehicle presence) Dimensions: 330 mm (W) X 214 mm (H) X 82 mm (D)
Inhaltszusammenfassung zur Seite Nr. 15
Panasonic System Solutions Company, Panasonic Canada Inc. 5770 Ambler Drive,Mississauga, Unit Company of Panasonic Corporation of North America Ontario, L4W 2T3 Canada (905)624-5010 Security Systems http://www.panasonic.ca www.panasonic.com/security For customer support, call 1.877.733.3689 Panasonic Sales Company Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Division of Panasonic Puerto Rico Inc. Zone Office San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carol
