Inhaltszusammenfassung zur Seite Nr. 1
MIL-S5000T
5-Port 1000BASE-T
Gigabit Ethernet Switch
USER GUIDE
Inhaltszusammenfassung zur Seite Nr. 2
Regulatory Approval - FCC Class A - UL 1950 - CSA C22.2 No. 950 - EN60950 - CE - EN55022 Class A - EN55024 Canadian EMI Notice This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Direc
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents 1. Introduction Gigabit Ethernet Technology Switching Technology Features Package Contents 2. Hardware Description Front Panel Rear Panel LED Indicators 3. Hardware Installation Desktop Installation Power On 4. Technical Specifications General Specifications Physical and Environmental Specifications Performance Specifications Appendix A: Regulatory Information
Inhaltszusammenfassung zur Seite Nr. 4
1. Introduction Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support for CSMA/CD protocol, full duplex, flow control, and management objects, but with a tenfold increase in theoretical throughput over 100-Mbps Fast Ethernet and a hundredfold increase over 10-Mbps Ethernet. Since it is compatible with all 10-Mbps and 100-Mbps Ethernet environments, Gigabit Ethernet provides a straightforward upgrad
Inhaltszusammenfassung zur Seite Nr. 5
to users on a local area network. A switch increases capacity and decreases network loading by making it possible for a local area network to be divided into different segments which do not compete with each other for network transmission capacity, giving a decreased load on each. The switch acts as a high-speed selective bridge between the individual segments. The switch automatically forwards traffic that needs to go from one segment to another, without interfering with any other segment
Inhaltszusammenfassung zur Seite Nr. 6
Package Contents Unpack the contents of the package and verify them against the checklist below. MIL-S5000T Gigabit Ethernet Switch External Power Adapter Four Adhesive Rubber Feet User's Guide Warranty Card If any item is missing or damaged, please contact your local dealer for service. 3
Inhaltszusammenfassung zur Seite Nr. 7
2. Hardware Description Front Panel The front panel of the Gigabit Ethernet Switch consists of LED Indicators, which display the conditions of the Gigabit Ethernet Switch and the status of the network. Figure 2-1. Front Panel view of the MIL-S5000T Gigabit Ethernet Switch Rear Panel The rear panel of the Gigabit Ethernet Switch consists of five Gigabit Ethernet ports with 10/100/1000Mbps Auto-Negotiation and the DC power connecter. Power is supplied through an external AC powe
Inhaltszusammenfassung zur Seite Nr. 8
LED Indicators The LED indicators of the Gigabit Ethernet Switch provide a real-time indication of system operating statuses. There are three LED-indicators for each Gigabit Ethernet port and one Power LED for the Unit. POWER The Power LED indicator is solid green when the Gigabit Ethernet Switch is receiving power. Link/Act The Link/Act LED indicators are solid when there is a secure connection (or link) to the desired port. A blinking LED indicator signifies reception or tra
Inhaltszusammenfassung zur Seite Nr. 9
3. Hardware Installation Desktop Installation Install the MIL-S5000T Gigabit Ethernet Switch in a location that conforms to the acceptable operation temperature and humidity ranges (see Technical Specifications). It is recommended that the site be free from strong electromagnetic source, vibration, dust, and direct sunlight. A minimum of 10cm of space on the left and right hand side of the Switch is required for ventilation purposes. Power On Connect the power adapter to the po
Inhaltszusammenfassung zur Seite Nr. 10
4. Technical Specifications General Specifications Standards: IEEE 802.3ab 1000BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3 10BASE-T IEEE 802.3x Flow Control Protocol: CSMA/CD Data Transfer Rate: Ethernet: 10Mbps (Half-duplex) 20Mbps (Full-duplex) Fast Ethernet: 100Mbps (Half-duplex) 200Mbps (Full-duplex) Gigabit Ethernet: 2000Mbps (Full-duplex) Topology: Star Network Cables: Ethernet: 2-pair UTP Cat. 3,4,5, Unshielded Twisted Pair (UTP )Cable Fast Ethernet: 2-pair UTP Cat. 5,
Inhaltszusammenfassung zur Seite Nr. 11
Performance Specifications Transmission Store-and-forward Method: RAM Buffer: 256K Bytes per device Filtering Address 8K MAC address per device Table: Packet Filtering/Forwarding Full wire speed Rate: MAC Address Self-learning, auto-aging Learning: 8
Inhaltszusammenfassung zur Seite Nr. 12
Appendix A: Regulatory Information FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmfu
Inhaltszusammenfassung zur Seite Nr. 13
90000424 Rev A 10
