Inhaltszusammenfassung zur Seite Nr. 1
NVX226
Navigation System
User’s Manual
1287693
Inhaltszusammenfassung zur Seite Nr. 2
Contents Getting started-------------------------------------------------------------------------------------- 1 Charging the battery ------------------------------------------------------------------------------- 1 Starting the AUDIOVOX NVX226 system ---------------------------------------------------- 3 Using the AUDIOVOX NVX226 system buttons -------------------------------------------- 5 Getting a GPS signal-------------------------------------------------------------------------
Inhaltszusammenfassung zur Seite Nr. 3
Getting started Congratulations on your purchase of the AUDIOVOX NVX226 system. Your AUDIOVOX NVX226 system can guide you to the destination of your choice using signals from Global Positioning Satellites (GPS) orbiting the earth. There are 24 GPS satellites orbiting the earth. A GPS device can calculate your position on the earth if it can receive signals from at least three of these satellites. When it receives at least four signals, a GPS device can also calculate your a
Inhaltszusammenfassung zur Seite Nr. 4
Starting the AUDIOVOX NVX226 system Once you have charged the battery and loaded map data, you are ready to start the AUDIOVOX NVX226 system. To start the AUDIOVOX NVX226 system: 1. If the AUDIOVOX NVX226 system is being used for the first time, set the power ON/OFF slide switch on the bottom of the device to ON. The AUDIOVOX NVX226 screen appears. 2. The AUDIOVOX NVX226 system will auto start the Navigation program, and the following warning screen appears: 2
Inhaltszusammenfassung zur Seite Nr. 5
3. Tap OK after you have read and agreed to the warning. The map view then appears and you are ready to set your first destination. 3 User’s Manual
Inhaltszusammenfassung zur Seite Nr. 6
Using the AUDIOVOX NVX226 system buttons The buttons on the AUDIOVOX NVX226 system have been set up to quickly show you key information. Zoom In and Zoom Out buttons Wheel button: Up: toggles 3D display on/off Right: displays the Route List Left: displays the GPS Info Down: toggles the mute on/off Center: tap for OK Main Menu button Set destination button System On/Off button Acquiring a GPS signal To use the AUDIOVOX NVX226 system to guide you to
Inhaltszusammenfassung zur Seite Nr. 7
Tap the left button: the screens appear in reverse order. Whichever current screen is displayed, tapping the OK button changes to the map screen. 5 User’s Manual
Inhaltszusammenfassung zur Seite Nr. 8
Entering data on the AUDIOVOX NVX226 system The AUDIOVOX NVX226 system doesn’t have a keyboard. Instead, you tap the screen to enter data, for best result use the stylus provided. When you are entering data, a screen containing the letters of the alphabet appears: As you tap the buttons on the keyboard, the list at the top of the screen scrolls to show the next item that matches the letters you’ve tapped. If you need to enter numbers, tap the button, and the numeric keyboard appears
Inhaltszusammenfassung zur Seite Nr. 9
Working with the map The AUDIOVOX NVX226 system presents many ways of looking at the map. You can view your current position, you can view any of the maneuvers on a route, and you can pan the map to view other areas. You can also zoom in and out, and you can find information about specific locations. Map view If you have acquired a GPS signal, the map view on the AUDIOVOX NVX226 system shows you your current location, indicated by a green arrow. If the arrow is red, no GPS si
Inhaltszusammenfassung zur Seite Nr. 10
At the bottom of the map, you can also see the time, an estimate of how much time before you arrive at your destination, the remaining distance to your destination, and your current speed. Panning the map You can pan the map by tapping and dragging the map. To return to the regular map view, press the center of the wheel button. Route list If you have set a destination, you can view a list of the maneuvers that make up your route by pressing the left side of the wheel button. Tapp
Inhaltszusammenfassung zur Seite Nr. 11
Main menu and set destination button Every time, you press a Main Menu screen appears. Press , if you have set a destination, a Destination Options screen appears. If not, a Set Destination screen appears, and then you can set a destination using any of the following methods: 9 User’s Manual
Inhaltszusammenfassung zur Seite Nr. 12
Location and POI information You can find location information about any point on the map by pressing firmly on the map. A screen appears giving you the opportunity to set the location as the Start or the Destination. Save this location to your Favorites list, or view information (Info). From the Information screen you have several options: • Set start location • Set destination • Save this location • Information Setting the location as a starting point is useful if you are try
Inhaltszusammenfassung zur Seite Nr. 13
2. Tap Information. The Information screen appears, giving you block information about the location, including latitude and longitude. To view Point of Interest (POI) information: 1. To view information about POI on the map, press firmly on the icon on the map. The POI(S) screen appears. 11 User’s Manual
Inhaltszusammenfassung zur Seite Nr. 14
Planning your route You can set a destination with the AUDIOVOX NVX226 system many different ways. Once you have set a destination, you can add a detour or a stopover. The AUDIOVOX NVX226 system also offers an Itinerary feature, where you can enter up to 50 destinations and use the Itinerary screen to arrange the addresses in any order you prefer. Setting a single destination You can set your destination the following ways: • Address • Intersection • Point of Interest
Inhaltszusammenfassung zur Seite Nr. 15
There are two ways to enter the address: by selecting the street first, or by selecting the city first. If you use Street First and too many records match, you will be asked to use City First. To enter an address as a destination using Street First: 1. Press . The Set Destination appears. 2. Tap Address. The Input Method screen appears. 3. If you need to change the region: • Tap Change. The Enter State Name screen appears. 13 User’s Ma
Inhaltszusammenfassung zur Seite Nr. 16
• Tap the letters to enter the name of the region, or tap the name of the region. • Tap OK when you have selected the region. You return to the Input Method screen. 4. Tap Street First. The Enter Street Name screen appears. 5. Tap the letters to enter the name of the street. Tap OK when you have selected the street. The Enter House Number screen appears. 6. Select the address that matches the location you want to go to and tap . The map appears, and the guidance directions begin. 14
Inhaltszusammenfassung zur Seite Nr. 17
To enter an address as a destination using City First: 1. Press . The Set Destination screen appears. 2. Tap Address. The Input Method screen appears. 3. If you need to change the region: • Tap Change. The Enter State Name screen appears. • Tap the letters to enter the name of the region, or tap the name of the region. • Tap OK when you have selected the region. You return to the Input Method screen. 15 User’s Manual
Inhaltszusammenfassung zur Seite Nr. 18
4. Tap City First. The Enter City Name screen appears. 5. Tap the letters to enter the name of the city. Tap OK when you have selected the city. The Enter Street screen appears. 6. Tap the letters to enter the name of the street. Tap OK when you have selected the street. The Enter House Number screen appears. 16 User’s Manual
Inhaltszusammenfassung zur Seite Nr. 19
7. Tap the numbers to enter the house number. Tap OK when you have finished. The Select Address screen appears. 8. Select the address that matches the location you want to go to and tap . The map appears, and the guidance directions begin. Using an intersection as a destination When you use an intersection for a destination you must know the names of both streets. If there are many cities that have streets with the first name you enter, you might be asked to select the city first. T
Inhaltszusammenfassung zur Seite Nr. 20
2. Tap Intersection. The Input Method screen appears. 3. If you need to change the region: • Tap Change. The Enter State Name screen appears. • Tap the letters to enter the name of the region, or tap the name of the region. • Tap OK when you have selected the region. You return to the Input Method screen. 4. Tap Street First. The Enter Street Name screen appears. 18 User’s Manual
