Bedienungsanleitung Seidio RBT-1000

Inhaltszusammenfassung zur Seite Nr. 1

Seidio Bluetooth GPS Receiver
RBT-1000 Quick Guide

Check the Package Content
Before you start using Seidio Bluetooth GPS Receiver, RBT-1000, please
check out if your package includes the following items. If any item is damaged
or missed, please contact your reseller at once.
RBT-1000
Power Switch, Power Jack & External Antenna Port
Right View

Power
Switch
External
Antenna Port
Power Jack
English
1

Inhaltszusammenfassung zur Seite Nr. 2

LED Display Front View 1 2 3 4 Battery Status GPS Status Bluetooth Status 1 Yellow LED indicates power is in charging 2 Blinking red LED indicates low power 3 Blinking Green LED indicates position is fixed 4 Blinking Blue LED indicates Bluetooth is connected Getting Started STEP 1: Charge the Battery Before you use RBT-1000, the battery must be charged for at least four hours. As RBT-1000 is in charging, the Yellow LED will be lighted up. When the battery is fully cha

Inhaltszusammenfassung zur Seite Nr. 3

device. If the connection between your device and RBT-1000 is successful, the Blue LED will be blinking. 2. Select correct bluetooth GPS device which name is BlueGPSXXXXXX (see picture below). STEP 4: Connect to your Navigation Software Install and launch your navigation software in Navigation Software Kit and set GPS configuration. Select correct COM port subject to the outbound Bluetooth serial port of your handheld device and correct baud rate depending on your

Inhaltszusammenfassung zur Seite Nr. 4

Tips 1. Place your RBT-1000 below the windshield without window film for car navigation 2. It is suggested that use RBT-1000 under less shielded environment to ensure better performance. 3. For the first position fix, please make sure your RBT-1000 is not in motion but stationary and in open space so as to shorten the fix time. English 4