Inhaltszusammenfassung zur Seite Nr. 1
S-Series
User Manual
en
English - Europe/Australia/New Zealand
Inhaltszusammenfassung zur Seite Nr. 2
S-SERIES Important safety information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
Inhaltszusammenfassung zur Seite Nr. 3
S-SERIES Internal battery-specific safety information The Navman contains a non-replaceable internal lithium-ion polymer battery. The battery may burst or explode if mishandled, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush or puncture the battery. Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of the battery in fire or water. Only use the correct mains power charger (sold
Inhaltszusammenfassung zur Seite Nr. 4
S-SERIES Contents Important safety information...................................................................................................................2 Welcome................................................................................................................................................7 Important information for using the manual.......................................................................................7 Getting to know your Navman...................
Inhaltszusammenfassung zur Seite Nr. 5
S-SERIES Viewfinder screen ...........................................................................................................................50 How do I customize camera preferences?..................................................................................51 How do I manage my NavPix? .....................................................................................................52 Album management ......................................................................
Inhaltszusammenfassung zur Seite Nr. 6
S-SERIES About ..............................................................................................................................................99 Shop Demo.....................................................................................................................................99 What is NavDesk? .............................................................................................................................100 Can I use NavDesk with my computer?........
Inhaltszusammenfassung zur Seite Nr. 7
S-SERIES Welcome Thank you for purchasing this Navman. This manual has been prepared to guide you through the operation of your Navman from first set-up through to continuous use. Please read this manual carefully before using your Navman for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual. Formatting The follo
Inhaltszusammenfassung zur Seite Nr. 8
S-SERIES Getting to know your Navman We recommend that you familiarize yourself with the Navman's basic operations. Components Component Description Turns the camera on and displays the Viewfinder screen. Press again to take a NavPix™. Battery Indicator Indicates the level of battery charge: Green - battery full Orange - battery charging. Turns the Navman on or off. For more information, see” How do I turn my Navman off?” on page 14. Connection socket for GPS MMC
Inhaltszusammenfassung zur Seite Nr. 9
S-SERIES Component Description Lanyard loop Loop for connecting a lanyard. Note: Lanyard sold separately. Slot for memory card. The memory card must be inserted with the label facing the front of your Navman. For more information, see “How do I insert a Memory Card?” on page 126. Note: Memory cards may be sold separately. Connection socket for the following: Cradle USB cable to connect to your computer In-vehicle charger to charge from a vehicle power socket Mains
Inhaltszusammenfassung zur Seite Nr. 10
S-SERIES How do I get started? Note: Before you begin, check if your vehicle is fitted with a heat-reflective or heated windscreen. If so, you may need to purchase an external antenna for your Navman to receive GPS signals. The first time you use your Navman, it may take up to 15 minutes to establish a GPS connection. For more information about GPS, refer to the GPS Frequently Asked Questions guide on the enclosed DVD. How do I turn my Navman on for the first time? To get started for
Inhaltszusammenfassung zur Seite Nr. 11
S-SERIES 11
Inhaltszusammenfassung zur Seite Nr. 12
S-SERIES 3. Turn your Navman on Press and hold to turn your Navman on. Your Navman will turn on and display the Language screen. 4. Select your preferred language From the Select Language screen, tap your preferred language. To prevent the Select Language screen from displaying on each start-up, clear the Show on start-up check box. You can change your preferred language while using your Navman (see "Language" on page 84). 5. Read the warning message a) The Safety Agreement
Inhaltszusammenfassung zur Seite Nr. 13
S-SERIES How do I adjust the volume? The volume on your Navman can be adjusted either by the volume control on the Volume preference screen or by using the volume control buttons on the remote control (sold separately). To mute the volume from the map screens, tap and then tap , or press on the remote control (sold separately). To adjust the volume, tap and hold to display the Volume preference screen. For more information on how to adjust the volume on your Navman, see “Volume”
Inhaltszusammenfassung zur Seite Nr. 14
S-SERIES How do I turn my Navman off? To turn your Navman off, press and hold . Power-saving standby mode To enter standby mode, press . To end standby mode, press again. When your Navman enters standby mode, the screen will turn off. When you turn your Navman on again, it will display the screen you were last viewing. To save power, your Navman will automatically enter standby mode after a pre-determined period of time. You can change the default standby mode setting at the Power
Inhaltszusammenfassung zur Seite Nr. 15
S-SERIES What are the main screens I will use? Main Menu screen The Main Menu screen is your starting point for searching for a destination. The Main Menu screens also allow you to customize preferences, receive updated traffic information, make and receive phone calls and take NavPix. The Main Menu can be accessed from the map screens by tapping or by tapping the status bar at the bottom of any screen. Note: The Main Menu screens may differ from those di
Inhaltszusammenfassung zur Seite Nr. 16
S-SERIES How do I navigate with GPS? The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Navman, to determine an exact location. Although a GPS receiver can detect signals from up to 12 satellites at any time, only four sign
Inhaltszusammenfassung zur Seite Nr. 17
S-SERIES How do I go from A to B? Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. When you ... Then ... know the address of your destination use the address-entry wizard to enter the address see "How do I search for an address?" on page 18. want to make multiple stops use the Multi-stop Trip Planner screen to enter multiple
Inhaltszusammenfassung zur Seite Nr. 18
S-SERIES How do I search for an address? Enter a destination using the Destination Search, Keyboard and Preview screens, which used together form an address-entry wizard. This section provides a case study to help guide you through setting your destination. Note: In some countries, you can search for your destination by postcode or zip code. If you are in the United Kingdom, and you know the postcode of your destination, you can search for it from the Destination Search screen by tappin
Inhaltszusammenfassung zur Seite Nr. 19
S-SERIES 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap . The Select a map screen will display. b) Select United Kingdom from the list. The Destination Search screen will display. 3. Search for the City/Area a) From the Destination Search screen, tap City/Area. The Keyboard screen will display. b) U
Inhaltszusammenfassung zur Seite Nr. 20
S-SERIES Using the Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. Search results will be listed in matching order, with the closest matches appearing at the top of the list. A maximum of 99 results will display. The Keyboard screen can display with various layouts depending on the information you need to enter, including alphabet, number, alternate characters and combinations of these. You can also choose t
