Inhaltszusammenfassung zur Seite Nr. 1
Important Safety
Instructions
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric to perso
Inhaltszusammenfassung zur Seite Nr. 2
Important Safety Instructions NOTES 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a damp cloth. 7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instructions Warning Failure to avoid the following potentially hazardous situations may result in injury or property damage. The unit is designed to provide you with route suggestions. It does not reflect road closures or road conditions, traffic congestion, weather conditions, or other factors that may affect safety or timing while driving. Use the unit only as a navigational aid. Do not attempt to use the unit for any purpose requiring precise measurement
Inhaltszusammenfassung zur Seite Nr. 4
Features Navigation Function Navigation Function: The unit is designed to provide you with route suggestions. It supports voice navigation. Other Special Functions SD Card and USB Input: The unit is Power Adapter Switch: Automatically designed with SD card and USB ports and adapts to voltage requirements in U.S and can be connected to SD card or other USB other countries. device for file loading. Support file formats: Supports MP3 Flash Storage: Bui
Inhaltszusammenfassung zur Seite Nr. 5
Accessories Accessories List ITEM NAME QTY Owner’s Manual 2 AC Adaptor 1 Car Adaptor 1 USB Cable 1 Windshield mount bracket 1 Mount cradle 1 Dashboard mount disk 1 Pouch 1 NOTE Accessories and their part number are subject to modification without prior notice due to improvements. 5
Inhaltszusammenfassung zur Seite Nr. 6
Contents ……………………………………….……..1 Important Safety Instructions ……………………………………………...4 Features ……………………………………………...5 Accessories ……………………………………………...7 View of Main Unit ……………………………………….……..8 System Connections …………………………..……….…....….10 Power Supply Preparation ………………………………………..…..12 General Setup ………………………………………..…..16 Playing Music ………………………………………....…18 Use of the Mount Accessories ………………………………………..…..19 Troubleshooting
Inhaltszusammenfassung zur Seite Nr. 7
View of Main Unit 4. Headphone Jack 1. LCD Screen 5. DC 5V Input Jack 2. POWER button Used to connect to the supplied car Press to enter or exit the standby adapter. mode. 3. Card Port Insert the SD card into the port. 6. USB port 7. RESET button Press to reset the system. 7
Inhaltszusammenfassung zur Seite Nr. 8
System Connections Always ensure that the unit and any other external device connected to the unit are switched off and unplugged from the power supply before you attempt to connect the unit to any external device. Connecting to PC The unit is designed with a USB port that allows you to connect the unit to PC for map updating. See the below figure for details: System requirements: -Windows 98SE, ME, 2000 and XP (Driver required for Windows 98SE) -DVD Rom Drive (for map upgrade purposes
Inhaltszusammenfassung zur Seite Nr. 9
System Connections Inserting SD Card The unit is designed with SD Card jack that allows you to insert the SD card into the unit as shown below: Connecting to Headphones Connect the headphones to the right side of the unit for private listening. When headphone is connected, the speakers will automatically turn off. Note: Excessively loud volume could damage your hearing. So turn down the volume before you connect the headphones, and
Inhaltszusammenfassung zur Seite Nr. 10
Power Supply Preparation Using the AC Adaptor The unit is supplied with an AC adaptor for powering the unit and charging the battery. 1. Connect AC adaptor to the right side of the unit in the jack marked DC 5V IN, as shown on the right. 2. Plug the two-prong end of the power cord into a grounded electrical outlet. Note Turn unit's power off before unplugging. In the case of using the adaptor, the LCD screen will be brighter than with the rechargeable b
Inhaltszusammenfassung zur Seite Nr. 11
Power Supply Preparation About Rechargeable Battery Your portable GPS comes with a built-in rechargeable battery. Charge the battery fully before initial use. Charging time is normally about 3.5 hours. A fully charged battery delivers about 3 hours of use. Working conditions and precautions for the rechargeable battery New batteries should be fully charged before initial use. Battery should only be used when temperatures are between 14 °-140 °F(-10 ℃-60 ℃). And it should
Inhaltszusammenfassung zur Seite Nr. 12
General Setup System Main Menu When in navigation mode, tap button in the Menu screen. A confirmation message appears asking if you want to exit the program now, as shown below. In the confirmation screen, tap Yes and the system main menu appears. In the system main menu, there are three items for selecting. Touch the corresponding item to enter. Tap to enter navigation mode. Tap to enter the settings menu. Tap to enter the Music player. Sett
Inhaltszusammenfassung zur Seite Nr. 13
General Setup LANGUAGE Tap in the settings menu to enter LANGUAGE settings menu for language selecting, as shown below: Tap the buttons to select language. Then tap to confirm or tap to cancel. BRIGHTNESS Tap in the settings menu to enter BRIGHTNESS settings menu for brightness adjusting, as shown below: Tap the first group buttons to adjust the brightness level. After setting, tap to confirm or tap to cancel. 13
Inhaltszusammenfassung zur Seite Nr. 14
General Setup DATE & TIME Tap in the settings menu to enter DATE & TIME settings menu for changing to the current time zone, as shown below: Tap the buttons to select the proper Time Zone. Tap the buttons of Date group to change the corresponding date and tap the buttons of Time group to change the corresponding time. Tap to return. POWER Tap in the settings menu to enter POWER menu for the current battery status, as shown below: The
Inhaltszusammenfassung zur Seite Nr. 15
General Setup CALIBRATE Tap in the settings menu to enter CALIBRATE menu for calibrating the sensitivity of the unit, the screen will display as below: Tap the center of “+” as it moves around the screen. If you touch the center of “+” every time, it will disappear and tap the screen to return to the settings menu. Note: If “+” doesn’t disappear, you should calibrate again. MASTER VOLUME Tap in the settings menu to enter VOLUME settings menu for master vo
Inhaltszusammenfassung zur Seite Nr. 16
Playing Music The unit is designed with SD card slot. You can insert the SD card with MP3 files. It only supports MP3 format files playback. Note: Do not store MP3 format files in the Flash storage, for the flash storage is used to store map data, any attempt to open the Flash storage may result in the map data missing and lost. Warning: For your own safety, do not use the earphones when driving. Take the following steps to play: Loading MP3 format files 1. Insert the
Inhaltszusammenfassung zur Seite Nr. 17
Playing Music In the menu, tap the MENU button to enter the MP3 play list menu, as shown below: When you open the play list, the system will look for audio files on its SD memory card and create a play list automatically. If the play list consists of more than one screen, tap the up arrow for the previous page and the down arrow for the next page. In the play list, double tap the songs to start playback. Tap ; when the button changes to orange, the pla
Inhaltszusammenfassung zur Seite Nr. 18
Use of the Mount Accessories When using the unit in vehicle, you can use the supplied mount accessories (mount bracket, mount cradle and dashboard mount disk) to mount the unit in the vehicle. Take the following steps to operate: 1. See Fig. 1. Push the mount cradle to mount bracket. 2. See Fig. 2. Fix the unit on mount cradle and bracket. 3. See Fig. 3. Lift the suction fastener, and place the unit on the desired location, then press down fastener f
Inhaltszusammenfassung zur Seite Nr. 19
Troubleshooting Take steps described in the tables below to solve simple problems before contacting customer service. If you suspect something wrong with this unit, immediately turn the power off and disconnect the power connector from the unit. Never try to repair the unit yourself because it is dangerous to do so. POSSIBLE SOLUTION POSSIBLE CAUSE PROBLEM The volume may be turned Turn up the volume. There is no sound down. The brightness may be Adj
Inhaltszusammenfassung zur Seite Nr. 20
Specifications TFT screen size 3.5 inches Frequency Response 20Hz ～20kHz Audio Signal-to-noise Rate ≥65dB Audio distortion or noise ≤－20dB (1kHz) Channel Separation ≥70dB (1kHz) Dynamic Range ≥80dB (1kHz) Power AC 100-240V ～ 50/60Hz; DC 5V Power Consumption < 8W Dimensions 100mmX76mmX22mm (L*W*D) Weight About 0.25kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 20
