Inhaltszusammenfassung zur Seite Nr. 1
Operating Instructions Manual
Hydraulic Clutch Jack
Model: 40500 Capacity: 500 lb.
SFA Companies
http://www.omegalift.com
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
Printed in China
40500-M0 05/07
Inhaltszusammenfassung zur Seite Nr. 2
Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language before use of this jack is authoriz
Inhaltszusammenfassung zur Seite Nr. 3
BEFORE USE OPERATION 1. Verify that the product and the application are Removing a Clutch compatible, if in doubt call Omega Technical Service 1. Select the correct size spline sleeve. Place the spline (888) 332-6419. on the adapter shaft, then attach to the head plate 2. Before using this product, read the operator's manual with the release pin & retaining pin provided. completely and familiarize yourself thoroughly with 2. Close the release valve by tightening the release the product, its
Inhaltszusammenfassung zur Seite Nr. 4
OPERATING with Optional Flywheel Adapter Note. Flywheel Adapter Assembly is not included with the unit. To order, refer to replacement parts section. Adapter Shaft Install the flywheel adapter 1. Keep jack in lowest position. Remove the release pin, then remove the spline sleeve and adapter shaft. Flywheel Adapter 2. Install the flywheel adapter assembly, then secure with the quick release pin. Note: Flywheel adapter assembly includes flywheel C-clip adapter, a shorter adapter shaft, and a
Inhaltszusammenfassung zur Seite Nr. 5
MAINTENANCE Important: Use only good grade hydraulic jack oil. Avoid Lubrication mixing different types of fluid and NEVER use brake A periodic coating of light lubricating oil to pivot points, fluid, turbine oil, transmission fluid, motor oil or glycerin. axles and hinges will help to prevent rust and assure that Improper fluid can cause premature failure of the jack wheels, casters and pump assemblies move freely. and the potential for sudden and immediate loss of load. Mobil DTE 13M or equiva
Inhaltszusammenfassung zur Seite Nr. 6
REPLACEMENT PARTS Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, please give the Model number and parts description. Call or write for current pricing: SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A. E-Mail: sales@omegalift.com Tel: (888) 332-6419 Fax: (816) 891-6599 Website: http://www.omegalift.com (Optional ) Figure 5 - Replacement Parts Ill
Inhaltszusammenfassung zur Seite Nr. 7
Replacement Parts List for Model 40500 Item Part No. Description Qty. Item Part No. Description Qty. 1 N/A Top nut 1 31 N/A Lift Arm Axle 1 2 5905-00100-100 Filler Plug 1 32 5701-00006-000 Grease Fitting 1 3 N/A Reservoir 1 33 N/A Lift Arm 1 4 N/A Piston Rod 1 34 N/A Snap Ring 4 5 N/A Ram Bearing 1 35 N/A Lift Arm Axle 1 6 N/A Cylinder 1 36 N/A Bolt 1 7 N/A Screw 1 37 N/A Spline Adapter Seat 1 8 N/A Base 1 38 N/A Parallel Link Axle 1 9 4200-01006-000 Handle Sleeve Seat 1 39 G410-00001-000 Adapte
Inhaltszusammenfassung zur Seite Nr. 8
ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas Cit
