Bedienungsanleitung Lathem ATX-GPS

Inhaltszusammenfassung zur Seite Nr. 1

ATX-GPS Satellite Synchronizer

Installation & Setup Guide
Welcome

Lathem’s ATX-GPS is a Global Positioning Satellite receiver that accesses the
accurate date and time signal transmitted each second by 24 satellites in
geosynchronous orbit around the globe.
The package includes an amplified GPS Antenna, which must be mounted
out-doors or beneath a roof sky-light, facing skyward. An integrated cable links
the Antenna to the ATX6.
The ATX-GPS receives its power from the ATX6 so ther

Inhaltszusammenfassung zur Seite Nr. 2

Installing the ATX-GPS Locate the antenna at the highest elevation possible, with a wide view of unobstructed, open sky. If possible, avoid mounting the antenna on the North side of a building, which might block exposure to satellites. Proper locations for antenna mounting: Improper locations for antenna mounting: Avoiding mounting the ATX-GPS in windows, between buildings, at “inside” corners or under awnings.

Inhaltszusammenfassung zur Seite Nr. 3

Inhaltszusammenfassung zur Seite Nr. 4

Mount the unit, according to the following steps. • Place the bracket at the selected location and mark the 2 mounting holes. • Drill a ¼” X 1 ½” hole at each of the marks • Insert the wall anchors in holes and tap flush to wall with a hammer. • Insert a screw through the top mounting hole and into the top anchor and tighten securely. • Place the ATX-GPS Receiver on the top of the bracket. • Place the p-clip around the cable • Insert a screw through the p-clip, through the bottom moun