Bedienungsanleitung Kenwood DNX6990HD

Inhaltszusammenfassungen

Inhaltszusammenfassung zur Seite Nr. 1

DNX7190HD
DNX7490BT
DNX6990HD
DNX6190HD
DNX6490BT
DNX5190
DNX5060EX
GPS NAVIGATION SYSTEM
Quick Start Guide
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
GPS Navigation System.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever

Inhaltszusammenfassung zur Seite Nr. 2

Quick Start Guide About The Quick Start Guide Contents This Quick Start Guide explains Precautions 3 the basic functions of this unit. For 2WARNING _______________________ 3 functions not covered in this guide, Cleaning The Unit ___________________ 4 refer to the Instruction Manual (PDF How To Reset Your Unit ______________ 4 file) contained in the included CD- Safety Precautions and ROM “Instruction Manual” . Important Information 5 To refer to the Instruction Manual 2WARNINGS __________

Inhaltszusammenfassung zur Seite Nr. 3

DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Lens fogging Precautions When you turn on the car heater in cold weather, dew or condensation may form on 2WARNING the lens in the disc player of the unit. Called lens fogging, this condensation on the lens may not allow discs to play. In such a situation, To prevent injury or fire, take remove the disc and wait for the condensation the following precautions: to evaporate. If the unit still does not operate normally afte

Inhaltszusammenfassung zur Seite Nr. 4

Quick Start Guide Acquiring GPS signal How To Reset Your Unit The first time you turn on this unit, you must If the unit or the connected unit fails wait while the system acquires satellite signals to operate properly, reset the unit. for the first time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall Press the button. 1 buildings and trees for fastest acquisition. The unit returns to factory settings. After the syst

Inhaltszusammenfassung zur Seite Nr. 5

DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Safety Precautions and Important Information Read this information carefully before starting to 2CAUTIONS operate the Kenwood Car Navigation System and follow the instructions in this manual. Neither Failure to avoid the following potentially Kenwood nor Garmin shall be liable for problems hazardous situations may result in injury or or accidents resulting from failure to observe the property damage. instructions in this

Inhaltszusammenfassung zur Seite Nr. 6

Quick Start Guide First Step Touch the corresponding 1 key and set the value. Power on the unit and perform some setup steps before using. Press the

button. The unit is turned on. Language ● To turn off the unit: Select the language used for the control Press the button for 1 second. screen and setting items. Default is “American English (en)”. After setting, touch [Enter]. Angle Press the button. Adjust the position of the monitor. Default is “0”. After setting, tou

Inhaltszusammenfassung zur Seite Nr. 7

DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Touch [Finish]. 2 NOTE • For details on operations of each setting, refer to the Instruction Manual. 7

Inhaltszusammenfassung zur Seite Nr. 8

Quick Start Guide Basic Operations Functions Of The Buttons On The Front Panel DNX7190HD/DNX7490BT 10 11 1 2 3 4 5 6 7 8 9 How To Insert An SD Card 8 1) Press <0> button for 1 second. Labelled The panel fully opens. side 2) Hold the SD card as the diagram in the right and insert it into the slot until it clicks. ● To eject the card: Push the card until it clicks and then remove your finger 0 from the card. The card pops up so that you can pull it out with your fingers. 8

Inhaltszusammenfassung zur Seite Nr. 9

DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Number Name Motion ﬁ (Reset) • If the unit or the connected unit fails to operate properly, the unit returns 1 to factory settings when this button is pressed (Instruction Manual P.111). • If the SI function is turned on, this indicator flashes when the vehicle ignition is off (Instruction Manual P.84). ATT • Switches attenuation of the volume on/off. 2 • North America Sales area: Pressing for 1 second stores the tag data of

Inhaltszusammenfassung zur Seite Nr. 10

Quick Start Guide DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX 1 7 8 9 2 DNX6490BT 3 4 5 6 10 DNX6990HD DNX6490BT How To Insert A MicroSD Card 10 1) Open the microSD card slot cover as the diagram in the right. 2) Hold the microSD card with the label facing left and the notched section up, and insert it into the slot until it clicks. ● To eject the card: Push the card until it clicks and then remove your finger from the card. The card pops up so that you can pull it out with your finger

Inhaltszusammenfassung zur Seite Nr. 11

DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Number Name Motion ﬁ (Reset) • If the unit or the connected unit fails to operate properly, the unit returns 1 to factory settings when this button is pressed (Instruction Manual P.111). • If the SI function is turned on, this indicator flashes when the vehicle ignition is off (Instruction Manual P.84). MENU • Displays the Top Menu screen (Instruction Manual P.14). 2 • Pressing for 1 second turns the power off. • When the pow

Inhaltszusammenfassung zur Seite Nr. 12

Quick Start Guide Common Operations General There are some functions which can [Menu] Returns to the Top Menu screen. be operated from most screens. (RETURN) Returns to previous screen. (common menu key) Touch to display the common menu. The contents of the menu are as follows. : Displays the EXT SW Control screen. : Displays the SETUP Menu screen. : Displays the Audio Control Menu screen. : Displays the control screen of current source. Icon feature differs depending on the so

Inhaltszusammenfassung zur Seite Nr. 13

DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX How To Use The Navigation System Press the

button to display the navigation screen. 1 Operate the desired function from the Main Menu screen. 2 1 GPS satellite strength. 1 3 2 Finds a destination. 2 Views the map. 3 Adjusts the settings. 4 4 5 Uses the tools such as ecoRoute and Help. 5 NOTE • You can get additional information about using the navigation system from Help. To display Help, touch [Tools] and then touch [H

Inhaltszusammenfassung zur Seite Nr. 14

Quick Start Guide Follow your route to the destination. 4 NOTICE • The speed limit icon feature is for information only and does not replace the driver’s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin and Kenwood will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs. Your route is marked with a magenta line. As you travel, your navigation system

Inhaltszusammenfassung zur Seite Nr. 15

DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Other Features ● Manually avoiding traffic on your route 1) From the map, touch the traffic icon. 2) Touch [Traffic On Route]. 3) If necessary, touch the arrows to view other traffic delays on your route. 4) Touch [Avoid]. ● Viewing the traffic map The traffic map shows color-coded traffic flow and delays on nearby. ● About traffic NOTICE • Traffic service is not available in some areas or countries. • Garmin and Kenwoo

Inhaltszusammenfassung zur Seite Nr. 16

Quick Start Guide How To Play Music You can play audio files from music CD, disc media, USB storage device and iPod. NOTE • For details on playable file format, media format, iPod model, etc., refer to the Instruction Manual. Connect the media you want to play as shown below. 1 Disc 1) Press the <0> button to open the front panel. 2) Insert the disc into the slot. The panel closes automatically and playback starts. ● To eject the disc: Press the <0> button. 0 1) Insert the disc into the slo

Inhaltszusammenfassung zur Seite Nr. 17

DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Control the music you are listening to on the source control 2 screen. The following symbols indicate the keys on the screen. The functions of the keys are the same despite the difference of the source you are listening to. Touch [ ] Basic operations from this screen 38 Plays or pauses: 7 Stops playing: 0 Disconnects the device: Searches the previous/next content: 4 ¢ Fast forwards or Fast backwards (Disc 1 ¡ or media, CD

Inhaltszusammenfassung zur Seite Nr. 18

Quick Start Guide How To Play Movie/Picture You can play DVD video, Video CD (VCD), movie files from disc media, iPod and picture files from USB storage device. NOTE • For details on playable file format, device format, etc., refer to the Instruction Manual. Connect the media you want to play. 1 For the method of connecting, see How To Play Music (P.16). Control the movie/picture by touching the screen. 2 Each area on the screen has a separate function. 3 3 1 2 1 2 3 1 DVD: Displays the DVD m

Inhaltszusammenfassung zur Seite Nr. 19

DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX How To Listen To The Radio/ HD Radio™ tuner/ SiriusXM™ Satellite Tuner Touch [Menu] on any screen. 1 Top Menu screen appears. Touch [TUNER], [HD Radio], or [SIRIUS XM]. 2 The unit switches to the radio/ HD Radio tuner / SIRIUS XM Satellite Tuner source. Operate on the source control screen. 3 ● Station search 1) Touch [ ]. Sub function menu appears. 2) Touch [AM] or [FM] to select the band. (Radio/ HD Radio tuner only) 3)

Inhaltszusammenfassung zur Seite Nr. 20

Quick Start Guide How To Make A Phone Call You can use your Bluetooth cell-phone when paired to this unit. Register your cell-phone to the unit. 1 Follow as the procedures shown below. For detailed operation, see Registering the Bluetooth Unit (P.69) in the Instruction Manual. 1) Press the button and touch [BT SETUP]. 2) Touch [SET] of [Regist New Device] in the Bluetooth SETUP screen. 3) Touch [PIN Code Set] in the Searched Device List screen. 4) Enter PIN code and touch [Enter]. 5) S

Ähnliche Anleitungen

#	Bedienungsanleitung	Kategorie	Herunterladen
1	Kenwood DDX5036 Handbuch	GPS-Empfänger	29
2	Kenwood DDX5036M Handbuch	GPS-Empfänger	10
3	Kenwood DDX6034 Handbuch	GPS-Empfänger	24
4	Kenwood DDX7034BT Handbuch	GPS-Empfänger	21
5	Kenwood DDX8022BT Handbuch	GPS-Empfänger	9
6	Kenwood DDX6034M Handbuch	GPS-Empfänger	4
7	Kenwood DDX7034BTM Handbuch	GPS-Empfänger	4
8	Kenwood DDX5034BT Handbuch	GPS-Empfänger	101
9	Kenwood DDX8046BT Handbuch	GPS-Empfänger	171
10	Kenwood DDX8024BT Handbuch	GPS-Empfänger	12
11	Kenwood DDX8054BT Handbuch	GPS-Empfänger	2
12	Kenwood DNR-1000U Handbuch	GPS-Empfänger	11
13	Kenwood DDX8034BT Handbuch	GPS-Empfänger	20
14	Kenwood DDX896 Handbuch	GPS-Empfänger	10
15	Kenwood DNX SERIES DDX6046BT Handbuch	GPS-Empfänger	172
16	Sony NAV-U NV-U74T Handbuch	GPS-Empfänger	3
17	Sony NV-U71T Handbuch	GPS-Empfänger	11
18	Sony NAV-U NV-U44 Handbuch	GPS-Empfänger	13
19	Sony NV-U50 Handbuch	GPS-Empfänger	12
20	Sony NAV-U NV-U72T Handbuch	GPS-Empfänger	4