Bedienungsanleitung GE Monogram ZX27CTYSS

Inhaltszusammenfassung zur Seite Nr. 1

27" Outdoor Cooking Center
®
Grill Cart
GE Monogram
Model ZX27CTYSS
Assembly Instructions
Before you Begin – Read these instructions completely and carefully.
Note To Installer: Be sure to leave these instructions with the Consumer.
Note to Consumer: Keep these instructions with your Use and Care Book for future reference.
If you have questions concerning the installation of Assembly of this grill cart requires basic mechanical
®
this product, call the GE Answer Center Consumer skills. Proper as

Inhaltszusammenfassung zur Seite Nr. 2

Installation 27" Grill Cart Assembly • Two 7/16" wrenches CAUTION: The grill is extremely heavy. 2 Tools • 3/8" wrench or socket people are required to lift and place the grill • Phillips head screwdriver You Will onto the cart. • Rubber or wooden mallet Need • Gloves to protect against sharp edges Step 2: Install Casters and Braces to Base Bottom Panel USE 4 1/4-20 x 1/2 EACH 1/4 Washer 1/4-20 Nuts Bolts USE Phillips • Install front brace to base with 4 bolts and 8 Head EACH washers through the

Inhaltszusammenfassung zur Seite Nr. 3

Installation 27" Grill Cart Assembly • Flatten the carton to use as a pad. Step 3: • Stand the assembled base on end. Install Side • Secure left and right side panels to the bottom panel with 4 bolts, washers and nuts Panels (2 on each side). Note: Right side panel has to Base a hole near the center. • Install bolt and washer from the bottom and into the base, secure with nuts inside. Do not tighten. Bottom Panel Right Side Panel USE 4 1/4-20 x 1/2 EACH 1/4 Washer 1/4-20 Nuts Bolts Step 4: Insta

Inhaltszusammenfassung zur Seite Nr. 4

Back Brace Installation 27" Grill Cart Assembly • Bolt back brace to side panels by installing Step 5 bolt with washer from the outside and Install secured with nut on the inside. (2 bolts on each side). Back Side Panel Brace USE 4 1/4-20 x 1/2 EACH 1/4 Washer 1/4-20 Nuts Bolts • Check to be sure all panels and holes in the Step 6 bottom right corner of the front panel are Check Panel correctly aligned. • Tighten bolts by holding a 7/16" wrench on Alignment, bolt and turning nuts below with anot

Inhaltszusammenfassung zur Seite Nr. 5

Installation 27" Grill Cart Assembly CAUTION: Lock front caster on the cart to Step 8 prevent movement. Mount Grill See installation instructions packed with the to Assembled grill. Remove packaging, drip tray, burner Cart grates and parts box. CAUTION: The grill is extremely heavy. 2 people are required to lift and place the grill onto the cart. • Lower the grill onto the cart. • Check to be sure the grill rests securely and fits square on the cart. • Secure the grill to the cart with 2 bolts,

Inhaltszusammenfassung zur Seite Nr. 6

Notes 27" Grill Cart Assembly 6

Inhaltszusammenfassung zur Seite Nr. 7

Notes 27" Grill Cart Assembly 7

Inhaltszusammenfassung zur Seite Nr. 8

To obtain specific information concerning any ® Monogram product or service, call GE Answer Center consumer information service at 800.626.2000—any time, day or night. For Monogram local service in your area, call 1-800-444-1845. NOTE: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications are subject to change without notice. Pub. No. 49-8840 Dwg. No. 164D3333P080 © 1997 GE Appliances ® (N.D. 723) 4/97 Monogram. 10744 General Electr