Inhaltszusammenfassung zur Seite Nr. 1
PARTS MANUAL
SERIES
MODELS
EM-70S (STEEL)
EM-70P (PLASTIC)
PLASTER AND MORTAR MIXER
(GASOLINE ENGINE/ELECTRIC MOTOR)
Revision #8 (03/19/10)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Inhaltszusammenfassung zur Seite Nr. 2
PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber. Your risk from these exposures varies, dependingonh
Inhaltszusammenfassung zur Seite Nr. 3
NOTES EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10) — PAGE 3
Inhaltszusammenfassung zur Seite Nr. 4
EM-70 S/P PLASTER/MORTAR MIXER — TABLE OF CONTENTS MQ-ESSICK — EM-70S/P HONDA GX160K1HX2 ENGINE Plaster/Mortar Mixer Air Cleaner Assy. .............................................. 30-31 Camshaft Assy. ................................................ 32-33 Proposition 65 Warning ............................................ 2 Carburetor Assy. .............................................. 34-35 Table Of Contents .................................................... 4 Control Assy. ...........
Inhaltszusammenfassung zur Seite Nr. 5
PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Effective: st January 1 , 2006 Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username Order parts on-line using Multiquip’s SmartEquip website! and Password, E-mail us at: parts@multiquip. com. View Parts Diagrams To obtain an MQ Account, contact your Order Parts District Sales Manager for more information. Print Specification Information Use the interne
Inhaltszusammenfassung zur Seite Nr. 6
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and QTY. Column remarks used in the Parts section of this manual. Use the Numbers Used — Item quantity can be indicated by a help numbers found on the back page of the manual if there number, a blank entry, or A/R. are any questions. A/R (As Required) is generally used for hoses or other NOTICE parts that are sold in bulk and cut to length. The contents and part numbers listed in the parts A blank e
Inhaltszusammenfassung zur Seite Nr. 7
EM-70 S/P MIXER— SUGGESTED SPARE PARTS EM-70P/S PLASTER AND MORTAR MIXER 1 TO 3 UNITS WITH HONDA GX160K1HX2 AND GX240K1HA2 ENGINES Part numbers on this Suggested Spare Parts List NOTE Qty.... P/N ...................... Description may supercede/replace the P/ 6 ....... 508473 ................ V-BELT A37 HONDA ENGINE, 5.0 HP N's shown in the test pages of 6 ....... 505834 ................ V-BELT A36 HONDA ENGINE, 8.0 HP this manual. 6 ....... 491112 ................ V-BELT A40 ELECTRIC MOTOR 2
Inhaltszusammenfassung zur Seite Nr. 8
EM-70 S/P MIXER— NAMEPLATE AND DECALS NAMEPLATE AND DECALS PAGE 8 — EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10)
Inhaltszusammenfassung zur Seite Nr. 9
EM-70 S/P MIXER— NAMEPLATE AND DECALS NAMEPLATE AND DECALS NO PART NO PART NAME QTY. REMARKS 1 DCL151 DECAL, TOWING INSTRUCTIONS 2 2 EM948630 DECAL, PUSH TO STOP 1 3 CIPDCL160 DECAL, CRUSH WARNING 2 4 EM510891 DECAL, ESSICK LOGO (SMALL) 3 5 948501 DECAL, SAFETY INSTRUCTIONS 1 6 35137 DECAL, WARNING READ 1 7 EM510883 DECAL, ESSICK LOGO (LARGE) 3 9 513479 DECAL, WARNING SAFETY GRATE 1 9 DCL335 DECAL, CRUSH WARNING SAFETY GRATE 1 10 DCL280 DECAL, WARNING DUMP HANDLE 1 11 513522 DECAL, DRUM LOCK 1
Inhaltszusammenfassung zur Seite Nr. 10
EM-70 S/P MIXER— FRAME ASSY. FRAME ASSY. PAGE 10 — EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10)
Inhaltszusammenfassung zur Seite Nr. 11
EM-70 S/P MIXER— FRAME ASSY. FRAME ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 514842 LOCK PIN UNIT 1 2 491692 COTTER PIN 1 3 530023 SPRING LOCKING PIN 1 4 507444 WASHER, FLAT 3/4" 1 5 514835 MAIN FRAME 1 7 514836 HANDLE, CLUTCH ENGAGE 1 8 EM963692 BOLT 1/2" UNC 1-1/2" 6 9 492584 NUT, LOCK 1/2" 6 10 514802 AXLE, UNIVERSAL 1 11 10176 LOCK NUT 1/2" NC 1 12 EM124 BOLT 1/2"-13 X 4 G5 1 13 SAFETY CHAIN 1 * 14 01004 CONNECTOR LINK ..................................................... 2 ..............
Inhaltszusammenfassung zur Seite Nr. 12
EM-70 S/P MIXER— PADDLE SHAFT ASSY. PADDLE SHAFT ASSY. PAGE 12 — EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10)
Inhaltszusammenfassung zur Seite Nr. 13
EM-70 S/P MIXER— PADDLE SHAFT ASSY. PADDLE SHAFT ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 514753 PADDLE SHAFT 1 2 492584 NUT, LOCK 1/2" 6 3 EM202896 PADDLE ARM, CENTER ENGINE END 1 4 EM963110 BOLT, 1/2-13 X 3-3/4 2 5 EM200292 INSERT, PADDLE ARM 4 6 EM202898 PADDLE ARM, ENGINE END 1 7 504322 WASHER, FLAT 1/2" 6 8 EM200297 U-BOLT, END PADDLES 2 9 EM202897 PADDLE ARM, CENTER TOW END 1 10 # 492367 SCREW, HHC 5/16-18 X 1-3/4 G5 14 * 11 # EM923023 WASHER, FLAT 5/16" 28 * 12# EM507497 BLADE, SIDE,
Inhaltszusammenfassung zur Seite Nr. 14
EM-70 S/P MIXER— STEEL DRUM ASSY. STEEL DRUM ASSY. 24 23 22 20 20 20 29 21 25 26 20 14 13 28 27 30 36 31 36 11 10 15 9 8 15 13 35 33 17 12 34 1 4 3 34 6 35 16 3 6 1 8 7 5 7 32 32 33 9 10 1 2 11 12 18 19 18 PART OF REAR FRAME PART OF FRONT FRAME NOTES: SET SCREWS AND BEARING 1 COLLAR ARE INCLUDED WITH BEARING AND CANNOT BE PURCHASED SEPARATELY. PAGE 14 — EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10)
Inhaltszusammenfassung zur Seite Nr. 15
EM-70 S/P MIXER— STEEL DRUM ASSY. STEEL DRUM ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 530028 DRUM BEARING BRACKET 2 2 3249 CAP, DUST 1 3 20561-001 BEARING SEALED ........................................... 2 ........... SET SCREWS AND BEARING .......................................................................................... COLLAR CANNOT BE PURCHASED .......................................................................................... SEPARATELY. 4 491008 CAP, GREASE FITTING 2 5
Inhaltszusammenfassung zur Seite Nr. 16
EM-70 S/P MIXER— PLASTIC DRUM ASSY. PLASTIC DRUM ASSY. 23 22 6 36 37 27 18 6 29 21 7 6 20 14 13 38 28 NOTES: SET SCREWS AND BEARING 1 COLLAR ARE INCLUDED WITH 39 BEARING AND CANNOT BE PURCHASED SEPARATELY. 46 11 10 9 8 47 33 44 45 12 40 43 30 41 4 6 34 3 1 5 31 35 42 15 7 32 15 17 1 1 2 3 45 43 16 6 8 7 18 32 PART OF 45 FRONT FRAME 9 10 11 12 18 19 PART OF REAR FRAME PAGE 16 — EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10)
Inhaltszusammenfassung zur Seite Nr. 17
EM-70 S/P MIXER— PLASTIC DRUM ASSY. PLASTIC DRUM ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 530028 DRUM BEARING BRACKET 2 2 3249 CAP, DUST 1 3 20561-001 BEARING SEALED ...................................................2 ............ SET SCREWS AND BEARING ................................................................................................... COLLAR CANNOT BE PURCHASED ................................................................................................... SEPARATELY. 4
Inhaltszusammenfassung zur Seite Nr. 18
EM-70 S/P MIXER — DRUM & PADDLE SHAFT COMPLETE ASSY. DRUM AND PADDLE SHAFT COMPLETE ASSY. (PLASTIC DRUM) PAGE 18 — EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10)
Inhaltszusammenfassung zur Seite Nr. 19
EM-70 S/P MIXER — DRUM & PADDLE SHAFT COMPLETE ASSY. DRUM AND PADDLE SHAFT COMPLETE ASSY. (PLASTIC DRUM) NO. PART NO. PART NAME QTY. REMARKS 1 516066 DRUM AND SHAFT COMPLETE ASSY...................1 ............ INCLUDES ITEMS LISTED BELOW: 530028 DRUM BEARING BRACKET 2 3249 CAP, DUST 1 20561-001 BEARING SEALED 2 491008 CAP, GREASE FITTING 2 EM916019 FITTING, GREASE 2 EM969013 NUT, LOCK 3/8" 8 3019092 WASHER, FLAT 3/8" 2 507844 SPRING, COMPRESSION 2 EM200288 PLATE, PACKING GLAND PRESSURE 2 EM
Inhaltszusammenfassung zur Seite Nr. 20
EM-70 S/P MIXER — DRUM & PADDLE SHAFT COMPLETE ASSY. DRUM AND PADDLE SHAFT COMPLETE ASSY. (STEEL DRUM) PAGE 20 — EM-70 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #8 (03/19/10)
