Inhaltszusammenfassung zur Seite Nr. 1
Integrated Flight Deck
Cockpit Reference Guide
Mooney M20M,
M20R, & M20TN
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Copyright © 2004 - 2006 Garmin Ltd. or its subsidiaries. All rights reserved. This manual reflects the operation of System Software version 0424.20 or later for the Mooney M20M, M20R, and M20TN. Some differences in operation may be observed when comparing the information in this manual to earlier or later software versions. Garmin International, Inc., 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Tel: 913/397.8200 Fax: 913/397.8282 Garmin AT, Inc., 2345 Turner Road SE, Salem, OR 97
Inhaltszusammenfassung zur Seite Nr. 4
WARNINGS, CAUTIONS, & NOTES WARNING: Navigation and terrain separation must NOT be predicated upon the use of the terrain function. . The G1000 Terrain Proximity feature is NOT intended to be used as a primary reference for terrain avoidance and does not relieve the pilot from the responsibility of being aware of surroundings during flight. The Terrain Proximity feature is only to be used as an aid for terrain avoidance and is not certified for use in applications requiring a certified terr
Inhaltszusammenfassung zur Seite Nr. 5
WARNINGS, CAUTIONS, & NOTES WARNING: NEXRAD weather data is to be used for long-range planning purposes only. Due to inherent delays in data transmission and the relative age of the data, NEXRAD weather data should not be used for short-range weather avoidance. WARNING: The Garmin G1000, as installed in the Mooney M20M, M20R, and M20TN aircraft, has a very high degree of functional integrity. However, the pilot must recognize that providing monitoring and/or self-test capability for al
Inhaltszusammenfassung zur Seite Nr. 6
WARNINGS, CAUTIONS, & NOTES CAUTION: The Garmin G1000 does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center. Unauthorized repairs or modifications could void both the warranty and the pilot’s authority to operate this device under FAA/FCC regulations. NOTE: When using Stormscope, there are several atmospheric phenomena in addition to nearby thunderstorms that can cause isolated discharge points in the Strike Display Mode. However
Inhaltszusammenfassung zur Seite Nr. 7
RECORD OF REVISIONS Part Number Change Summary 190-00450-01 Reformat of manual Added WX 500 Stormscope Added XM Weather Added ADF/DME Added extended range fuel tanks Changes in EIS softkey labels 190-00450-02 Added TAWS-B Added Automatic Flight Control System Changed System Software Revision Revision Date of Revision Affected Pages Description A 12/05 i-Index-2 Initial release B 4/06 2-4 Added Altitude Alert and Barometric Minimums info. 11-2 Added Hazard Displays with Loss of GPS info. 12-1 Add
Inhaltszusammenfassung zur Seite Nr. 8
RECORD OF REVISIONS Blank Page RR-2 Garmin G1000 Cockpit Reference Guide for the Mooney M20M, M20R, & M20TN
Inhaltszusammenfassung zur Seite Nr. 9
TABLE OF CONTENTS 4.2 Volume ...................................................................... 4-3 SECTION 1: SYSTEM OVERVIEW .................................... 1-1 4.3 Automatic Squelch ................................................. 4-3 1.1 PFD/MFD Controls ................................................... 1-2 4.4 Quickly Activating 121.500 MHz .......................... 4-3 1.2 PFD Softkeys ............................................................ 1-4 4.5 Optional NAV Radios ...
Inhaltszusammenfassung zur Seite Nr. 10
TABLE OF CONTENTS Navigation Mode (GPS, VOR, LOC, or BC) ................... 6-12 Access Runway Information for the Selected Navigation Mode Armed ....................................... 6-12 Airport ................................................................... 7-6 Approach Mode (GPS, VAPP or LOC) .......................... 6-13 Quickly Tune the COM Transceiver to a Nearby Go Around (GA) ........................................................ 6-13 Airport Frequency ...................
Inhaltszusammenfassung zur Seite Nr. 11
TABLE OF CONTENTS 8.6 Invert Active Flight Plan ....................................... 8-3 10.4 Traffic Information Service (TIS) ....................... 10-7 8.7 Create a New Flight Plan ...................................... 8-4 Displaying Traffic on the Traffic Map Page ................... 10-7 Create a New Flight Plan Using the MFD ..................... 8-4 Displaying Traffic on the Navigation Map ................... 10-7 Create a New Flight Plan Using the PFD ...................... 8-4 TIS Aud
Inhaltszusammenfassung zur Seite Nr. 12
TABLE OF CONTENTS 12.2 M20M/M20R/M20TN Aircraft Alerts .................. 12-2 Voice Alerts ............................................................... 12-2 Message Advisory Alerts ............................................ 12-2 12.3 AFCS Alerts ............................................................. 12-3 System Status Field ................................................... 12-3 12.4 TAWS ALERTS ......................................................... 12-4 TAWS System Status Annun
Inhaltszusammenfassung zur Seite Nr. 13
SECTION 1 SYSTEM OVERVIEW This guide gives the pilot abbreviated operating SECTION 1: SYSTEM OVERVIEW instructions for the Primary Flight Display (PFD), Multi Function Display (MFD), and the GMA 1347 Audio Panel The purpose of this Cockpit Reference Guide is to System. provide the pilot a resource with which to find operating instructions on the major features of the G1000 system NOTE: The pilot should read and thoroughly more easily. It is not intended to be a comprehensive understan
Inhaltszusammenfassung zur Seite Nr. 14
SECTION 1 SYSTEM OVERVIEW 1.1 PFD/MFD CONTROLS 1 2 3 4 5 6 7 8 9 17 Figure 1-1 PFD/MFD Controls 18 10 14 19 24 11 15 20 25 12 16 21 22 13 26 23 27 MFD Only 1-2 Garmin G1000 Cockpit Reference Guide for the Mooney M20M, M20R, & M20TN
Inhaltszusammenfassung zur Seite Nr. 15
SECTION 1 SYSTEM OVERVIEW Functionality of the PFD and MFD controls are the (10) Direct-to Key – Allows the user to enter a destination same with the exception of the dedicated autopilot keys waypoint and establish a direct course to the selected located only on the MFD bezel. destination (specified by the identifier, chosen from the active route, or taken from the map cursor position). (1) NAV VOL/ID Knob – Controls the NAV audio level. (11) FPL Key – Displays the active Flight Plan Page
Inhaltszusammenfassung zur Seite Nr. 16
SECTION 1 SYSTEM OVERVIEW (16) ENT Key – Accepts a menu selection or data entry. 1.2 PFD SOFTKEYS This key is used to approve an operation or complete data entry. It is also used to confirm selections and information Softkey ON Softkey OFF entries. (17) Dual ALT Knob – Sets the reference altitude in the (optional) INSET PFD OBS CDI ADF/DME XPDR IDENT TMR/REF NRST ALER TS box located above the Altimeter. The large knob selects the thousands, while the small knob selects the hundreds. Alti
Inhaltszusammenfassung zur Seite Nr. 17
SECTION 1 SYSTEM OVERVIEW PFD – Press to display the additional softkeys for NAV1 – Displays NAV1 waypoint frequency or additional configurations of the PFD. identifier and DME information in the BRG1 METRIC – Press to display the current and Information Window. reference altitudes in meters, in addition GPS – Displays GPS waypoint identifier and GPS to feet. Pressing the METRIC Softkey also distance information in the BRG1 Information changes the barometric setting to hectopascals. Win
Inhaltszusammenfassung zur Seite Nr. 18
SECTION 1 SYSTEM OVERVIEW BRG2 (bearing) – Press to cycle through the OBS – Press to select OBS Mode on the CDI when navigating by GPS (only available with active leg). following Nav sources, making the pointer the CDI – Press to change navigation mode on the CDI indicator for the corresponding source and between GPS, VOR1, and VOR2. displaying the the appropriate information. ADF/DME (optional) – Press to display the ADF/DME NAV2 – Displays NAV2 waypoint frequency or Tuning Window. ident
Inhaltszusammenfassung zur Seite Nr. 19
SECTION 1 SYSTEM OVERVIEW BKSP – Press to remove numbers entered one 1.3 MFD SOFTKEYS at a time. ENGINE – Pressing this softkey makes available the BACK – Press to return to the previous level LEAN and SYSTEM softkeys which in turn access softkeys. the Lean Page and the System Page, respectively. IDENT – Press to provide special aircraft position MAP – Pressing this softkey enables the following identification to Air Traffic Control (ATC). softkeys: BACK – Press to return to the previou
Inhaltszusammenfassung zur Seite Nr. 20
SECTION 1 SYSTEM OVERVIEW STRMSCP (optional) – Pressing this softkey 1.5 BACKLIGHTING displays/removes Stormscope lightning data on the Navigation Map. To manually adjust the backlight for the NEXRAD (optional) – Pressing this softkey PFD and MFD: displays/removes precipitation data on the 1) Press the MENU Key on the PFD to display the Navigation Map. PFD Setup Menu Window. XM LTNG (optional) – Pressing this softkey 2) Press the Small FMS Knob to activate the cursor. displays/removes X