Bedienungsanleitung Furuno GP-30

Inhaltszusammenfassung zur Seite Nr. 1

GP-30/35 GPS NAVIGATOR
Operator's Guide
The purpose of this operator's guide is to provide the basic operating procedures for this
equipment. For detailed information, refer to the operator's manual.
Selecting Display Mode Enlarging, Shrinking the
Display
Press the [DISP] key.
1. Press the [MENU] key.
Plotter Display
2. Press the [ENT] key.
2D
Ship's track and
n
[ 5 ] 3. Press to enlarge; to shrink.
m
data
x
X
CSE:
4. Press the [ENT] key to close the window.
7°
SPD:
k
X
0.0
t
34°44.

Inhaltszusammenfassung zur Seite Nr. 2

Registering Waypoints Setting, Cancelling Destination A waypoint can be entered four ways. Be- Destination can be set three ways. Below is low is the procedure for entry by the cursor. the method for setting destination by the cursor. 1. Operate the Cursor Pad to place the cur- sor on the location you want to make a To set destination; waypoint. 1. Press the [GOTO] key. 2. Press the [ENT] key. 2. Select “CURSOR?”. CURSOR POS. → WYPT 3. Press the [ENT] key. 4. Place the cursor on position to se