Inhaltszusammenfassung zur Seite Nr. 1
XDVDN9131
INSTALLATION/OWNER’S MANUAL
DVD Multimedia Receiver with GPS Navigation and 7” Touch Screen Display
Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature
to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the
parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
Inhaltszusammenfassung zur Seite Nr. 2
Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Manufactu
Inhaltszusammenfassung zur Seite Nr. 3
XDVDN9131 PREPARATION Table of Contents Page Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Control Locations - Monitor Cl
Inhaltszusammenfassung zur Seite Nr. 4
XDVDN9131 PREPARATION WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage. Several states prohibit the installation of monitors/DVD players if the screen is visible
Inhaltszusammenfassung zur Seite Nr. 5
XDVDN9131 OPERATION Safety Information Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDVDN9131 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only. To prevent damage or injury: • Make sure to ground the unit securely to the vehicle chassis ground. • Do not remove the top or bottom covers of the unit. • Do n
Inhaltszusammenfassung zur Seite Nr. 6
XDVDN9131 INSTALLATION Preparation Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove 3 transit screws located on top of the unit. • Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve. • Install m
Inhaltszusammenfassung zur Seite Nr. 7
XDVDN9131 INSTALLATION Wiring Diagram - Inputs/Outputs Note: When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could damage the unit. The XDVDN9131 uses (2) 10 amp ATM mini style fuses. There is one fuse located on the back of the unit and one fuse located inside the in-line filter box. Wiring Notes: Subwoofer output The SUBWOOFER preamp audio output (Blue RCA) is active in all audio modes. Rear view camera A rear view camera (not includ
Inhaltszusammenfassung zur Seite Nr. 8
XDVDN9131 INSTALLATION Installation - GPS Antenna & Microphone • Determine a suitable location for mounting the GPS antenna. For optimum reception, the antenna should be mounted in the center of the vehicle roof with a minimum of 6” from any window. The antenna can also be mounted to the rear trunk lid at least 4” from the rear window. • Do not install the antenna in a location where it may obstruct the field of view to the skyline such as on the front dashboard or rear deck tray. • Clean the
Inhaltszusammenfassung zur Seite Nr. 9
XDVDN9131 OPERATION IR Remote Preparation Remove battery insulation tape Notes: • Remove the battery if the remote will not be used for a month or longer • Remove and dispose of battery properly • Do not store battery with metallic objects or materials To insert or replace the battery: Remove the battery holder Remove the battery from the battery holder Install the new battery Make sure to keep the (+) side up Insert the battery holder 8
Inhaltszusammenfassung zur Seite Nr. 10
XDVDN9131 OPERATION Control Locations - Monitor Closed 1 2 3 4 5 6 7 18 8 16 15 11 10 9 17 14 13 12 Bluetooth Microphone 10 Talk 1 Eject 11 Band/Play/Pause 2 Display/Info 12 Channel/Chapter/Track Up/Fast Forward 3 13 4 Secondary LCD Power/Volume/EQ 5 Auto Store/Preset Scan 14 Channel/Chapter/Track Down/Fast Reverse 6 Open/Close Monitor 15 Mode 16 7 Front Panel Release End Call 8 3.5mm A/V Input 17 Mute/Loudness 9 USB Input 18 Infrared Sensor Secondary LCD Information 1 2 3 4 5 6 1 Stereo indi
Inhaltszusammenfassung zur Seite Nr. 11
XDVDN9131 OPERATION Control Functions - Monitor Closed Bluetooth Microphone Built-in microphone for Bluetooth hands-free calls. Eject Press once to eject disc. Display When the monitor is closed, press DISP to toggle display between information available for the current mode such as clock, frequency, track, song or chapter information. Secondary LCD Additional LCD for system information while monitor is closed. AS/PS Press AS/PS momentarily to start station Preset Scan function. Press AS/PS
Inhaltszusammenfassung zur Seite Nr. 12
XDVDN9131 OPERATION Control Functions - Monitor Closed Mode Press MODE to select between Tuner, Disc (which includes DVD and CD playback), operation of iPod, USB, Bluetooth, SD, Auxiliary 1 and Auxiliary 2 inputs. Each time the MODE button is pressed the next mode is chosen. Modes of operation are indicated on the OSD or the secondary LCD. Optional iPod device, USB flash drive, SD card or Bluetooth device must be connected/inserted to appear in the mode selection string. End Button Press t
Inhaltszusammenfassung zur Seite Nr. 13
XDVDN9131 OPERATION Control Locations and Functions - Monitor Open 1 2 1 Close Monitor 2 SD Card Input Screen Angle Up 3 Navigation 4 5 Screen Angle Down 5 4 3 Close Monitor Press CLOSE to open or close the monitor. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur. SD Card Input Insert SD card to play audio files. Screen Angle Up Press momentarily to adjust the angle of the screen upwards. Press and hold to slide the
Inhaltszusammenfassung zur Seite Nr. 14
XDVDN9131 OPERATION Control Locations - Remote 2 3 4 1 5 6 7 8 9 10 11 12 13 15 16 14 19 20 17 18 21 22 23 24 26 27 28 25 29 30 31 32 35 34 36 33 39 38 40 37 1 Power 16 Key #9 31 Root Navigation Escape Repeat 2 17 32 Open/Close Search Chapter/Track/Seek Tune Down 3 18 33 Mode Key #0/DVD Setup Chapter/Track/Seek Tune Up 4 19 34 Volume Up Audio Select Fast Reverse/Manual Tune Down 5 20 35 Key #1 Menu Fast Forward/Manual Tune Up 6 21 36 Key #2 4-Way - Up Zoom 7 22 37 Key #3 Play Audio 8 23 38 Volum
Inhaltszusammenfassung zur Seite Nr. 15
XDVDN9131 OPERATION Control Functions - Remote Power Press once to turn the unit on, press again to turn unit off. Navigation Press to select between navigation mode and current source. Open Press once to open monitor; press again to close the monitor. Mode Press once to incrementally select desired source. Volume Up Increase VOLUME. Keys 0-9 Direct access for chapter/track/preset stations 1 ~ 9; keypad entry 0 ~ 9. Volume Down Decrease VOLUME. Mute Press once to MUTE audio; press again to retur
Inhaltszusammenfassung zur Seite Nr. 16
XDVDN9131 OPERATION General Operation Power On/Off Momentarily press the volume control (PWR) or any other button (except EJECT) to turn the unit on. Hold for 3 seconds to turn the unit off. Mute Press MUTE to silence the audio; will appear in the OSD (On Screen Display). Press MUTE again to cancel. Loudness Press LOUD on the OSD to turn the Loudness on/off. Pressing and holding the MUTE button on the front panel or remote will also turn the Loudness on/off. Mode Press MODE to select betwe
Inhaltszusammenfassung zur Seite Nr. 17
XDVDN9131 OPERATION General Operation Info Press INFO momentarily to display DVD disc information. Press and hold to access brightness menu. Monitor Brightness Press and hold INFO for 3 seconds to change monitor Brightness. Turn the rotary Q or P to adjust to desired level. (0 minimum/20 maximum; 10 is default). Color Setup When a video source is connected to the front or rear auxiliary inputs, press INFO for more than 2 seconds to adjust COLOR SETUP during video play. Press or to step to
Inhaltszusammenfassung zur Seite Nr. 18
XDVDN9131 OPERATION General Operation - Main Menu 1 2 3 4 5 6 14 7 13 8 12 11 10 9 There are two methods to access the MAIN menu: Main Menu Access • Press MENU button on the remote control. • Touch MENU or the upper left corner of the touch screen from any mode (except Navigation). Button/Icon Identification Touch to access AM/FM TUNER mode. 1) Touch to access USB mode (optional USB flash drive must be inserted). 2) Touch to access CD/DVD mode (CD/DVD must be inserted). 3) Touch to access NAVI
Inhaltszusammenfassung zur Seite Nr. 19
L L L XDVDN9131 OPERATION Main Setup - Menu Main Setup Menu • Press MAIN SETUP icon to access the Main setup mode. Page 1 • Select desired parameter you wish to change. • Page will return back to previous screen after 15 seconds of inactivity or by pressing the RETURN arrow in the top right corner. • Press the PAGE DOWN icon to access Main Setup page 2. MAIN Setup Menu matrix - page 1 Settings Default Options Function USA S-Amer1 Tuner USA Select appropriate tuner frequency spacing for your are
Inhaltszusammenfassung zur Seite Nr. 20
L L XDVDN9131 OPERATION Main Setup - Menu MAIN Setup Menu matrix - page 2 Settings Default Options Function Camera Image Normal Normal Normal image Reverse Mirror camera image 180 degrees On TFT panel will automatically open when ACC is turned on TFT Auto Open Off Off TFT panel will not auto open when ACC is turned on Manual TFT will only open/close when OPEN button is pressed Anti-theft Code 0000 **** Must enter password to turn anti-theft on or off Anti-theft Off On System will require a passw
