Inhaltszusammenfassung zur Seite Nr. 1
GPD359B
User Manual
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
A. Basic Operation............................................................................................................................3 1. Understanding of the Product Components ..........................................................................3 1.1 Front components........................................................................................................3 1.2 Back components ........................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
Precaution and Notice The PND is used only as a navigation aid. It is not for precise measurement of direction, distance, location or topography. The user must follow all traffic signs and local regulations along the roads. GPS satellite signals cannot pass through solid materials (except glass). When you are in a tunnel or building, GPS position is not available. At least 4 GPS satellite signals are needed to determine the current location. Signal reception can be affected by situations
Inhaltszusammenfassung zur Seite Nr. 5
A. Basic Operation 1. Understanding of the Product Components 1.1 Front components Touch Screen 1.2 Back components Light-Sensor Reset Speaker 3
Inhaltszusammenfassung zur Seite Nr. 6
1.3 Top components Charging Indication Power 1.4 Left-side components MIC 1.5 Right-side components T-flash Card Slot Insert with a menory card; please do not remove the memory card when using the device Mini-USB Port 4
Inhaltszusammenfassung zur Seite Nr. 7
1.6 Bottom components Installing the T-flash Memory Card The T-flash memory card contains the map data which PND needs. Please insert the memory card into the slot on the right side of the PND. Once the card is inserted, it can not be removed during the process of the device operation. If you need to remove the card, please switch off the unit first. And then push the card in and it will eject from the slot. 2. Accessory Operations 2.1 Charging by Car Charger When use your PND in th
Inhaltszusammenfassung zur Seite Nr. 8
2.2 Install the Cradle and Car Mount Install car Mount System Step2: Install the holder into the Car cradle by the sockets lk l Step1: Rotate screw to lock onto car glass Use the two screws to adjust the angle and direction of the PND Install PND into the holder 2.3 USB Cable usage The USB cable is provided for system upgrading. It can connect the navigator to the computer and make these two synchronize. For upgrading and more information about Micros oft Active Sync, please visit Mi
Inhaltszusammenfassung zur Seite Nr. 9
Hold until the device receives 4 GPS satellite signals, then you can program your trip. Note: There are various ways for searching a location on the map or planning your routing. Please follow Navigation User Manual which will guide you when driving. B. Functions Operation 1 Powering & Main Menu Long time press the “Power” button to power the equipment on and you will see the power-on interface. Long time press the “Power” button again to turn the unit off. 2 Main Interface 2.1 Navigation
Inhaltszusammenfassung zur Seite Nr. 10
2. Tap the song name you want to choose to enter into the following interface: Repeat Random File shift Tap the REPEAT icon to repeat the selected file. Tap the RANDOM icon to randomly play the files loaded on the card. Tap “Next” to play the next file and Tap “Previous” to play the previous piece of music. Tap the “X” to return to the file list interface. 2.3 Photo 1. Tap the “photo” icon on the main interface to enter into the picture browse interface: 8
Inhaltszusammenfassung zur Seite Nr. 11
Double tap on the file name to enter into the following interface: Previous Next File shift Full Screen Document Name 1. Tap “Previous” button to display the previous picture, tap “Next” button to display the next picture. 2. Tap “Full Screen” button to display the picture in full screen as follows: 9
Inhaltszusammenfassung zur Seite Nr. 12
3. The picture will be displayed automatically at full screen mode, and tap the screen to return to the following interface: 4. Tap the “X” to return to the picture list interface. 2.4 Ebook 1. Tap the “E-book” icon on the main interface to enter into the Ebook interface: 10
Inhaltszusammenfassung zur Seite Nr. 13
Document shift Document Name Page select Current Page/ Total Page 1. Tap “Previous Page” button to turn to the previous page and tap “Next Page” to turn to the next page. 2. Tap “Page select” button to choose the page which you want. 3. Tap the “X” to return to the E-Book list interface. 2.5 Video 1. Tap “Video” icon on the main interf ace to enter into the Video interface: 11
Inhaltszusammenfassung zur Seite Nr. 14
2. Tap the movie file you want to choose with the touch panel to start play the movie Full Screen File shift Progress 3. Tap “Full Screen” button to play the movie in full screen. 4. During play in full screen, double tap the screen to return to the interface above. 12
Inhaltszusammenfassung zur Seite Nr. 15
2.6 System 1. Tap the system icon to enter into the interface as follows: 2. Tap the “Volume” button to enter into sound setting interface as follows: 3. Tap the “Power” button to enter power setting interface as follows: 4. Tap the “Backlight” button to enter into the backlight setting interface as follows: 13
Inhaltszusammenfassung zur Seite Nr. 16
If you do not choose “Auto-Brightness”, tapping the left button will gradually diminish the lightness; while tapping the right button will gradually increase the brightness. If you choose “Auto-brightness”, the system will automatically adjust the brightness of the display screen along with the light intensity of its surrouning. At this time, the buttons on the left and right sides of the “Backlight Display” bar do not function. 5. Tap the “Date Time” button to enter into the Date Time sett
Inhaltszusammenfassung zur Seite Nr. 17
6. Tap the “Language” button to enter into the language and skin setting interface as follows: 7. Tap the “System” button to enter into the System Info settings as follows: 15
Inhaltszusammenfassung zur Seite Nr. 18
Tap the “USB” to set the USB working mode. You can calibrate the touch screen if it does not respond accurately to your stylus taps. a) Tap the Calibration button on the System info. Screen. b) Tap to the calibration indicated on the screen. c) Tap and hold at the center of the target. d) When the target moves to another position, tap and hold at the center of the new target. e) Repeat each time to complete the calibration process. When completed, tap screen to return to the Settings
Inhaltszusammenfassung zur Seite Nr. 19
Inhaltszusammenfassung zur Seite Nr. 20
