Bedienungsanleitung Linear 1090

Inhaltszusammenfassung zur Seite Nr. 1

™
™
INSTR,INSTL,MC1090,GDO,RECEIVER
LINEAR P/N: 214961 A
INK: BLACK
MATERIAL: 20 LB. MEAD BOND
SIZE: 9.000" x 5.500"
SCALE: 1-1
SIDE 1 OF 2
TRANSMITTER BATTERY REPLACEMENT
Replacement battery - 9 volt NEDA 1604 (Eveready 216 or equivalent).
The battery in the transmitter can be checked or changed by removing the front
®
lower half of the transmitter. Refer to the directions under “accessing the code
switch” for battery replacement.
TO REPLACE OR ADD A SET
Installation Instructions
A replacement

Inhaltszusammenfassung zur Seite Nr. 2

1 2 3 9 10 4 5 6 7 8 1 2 3 INSTR,INSTL,MC1090,GDO,RECEIVER LINEAR P/N: 214961 A INK: BLACK MATERIAL: 20 LB. MEAD BOND SIZE: 9.000" x 5.500" SCALE: 1-1 SIDE 2 OF 2 (a) White wire to terminal “1” or “24v” CODE SWITCH MATCH (b) Black wire to terminal “2” or “Relay” OPERATOR TERMINAL (c) Red wire to terminal “3” or “Common” (“Radio Power”) (d) Connect push button wires to terminal “1” and “2” (See Figure #2). MOUNTING TAB Where power for the radio receiver is not available from the operator order a